journal article·2016-08Open access

Durability of CFRP strengthened steel circular hollow section member exposed to sea water

M.H. Kabir, S. Fawzia, T.H.T. Chan, M. Badawi

Abstract

Abstract This paper presents the results from a research program to investigate the durability of CFRP strengthened steel circular hollow section (CHS) members with and without embedded glass fibre reinforced polymer (GFRP) at ambient (24 °C ± 4 °C) and 50 °C temperatures under accelerated corrosion environment. The beams were tested to failure under four-point bending. It was found that the accelerated corrosion adversely affected the durability of the strengthened beams at both temperatures and the embedded GFRP enhanced the durability. Durability design factor has also been recommended. The proposed theoretical approach predicts ultimate loads reasonably compared to experimental value of ultimate loads.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Load-Bearing Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Hollow sections in structural applications
2. Teng · 2002
3. State-of-the-art review on FRP strengthened steel structures10.1016/j.engstruct.2006.10.006 ↗
4. Cold region durability of a two-part epoxy adhesive in double-lap shear joints: experiment and model development10.1016/j.conbuildmat.2012.04.026 ↗
5. Mertz · 1996
6. Strengthening of tensile steel members and bolted joints using adhesively bonded CFRP plates10.1016/j.conbuildmat.2005.06.042 ↗
7. Experimental and finite element analysis of a double strap joint between steel plates and normal modulus CFRP10.1016/j.compstruct.2006.04.038 ↗
8. Axial loading tests on short and long hollow structural steel columns retrofitted using carbon fibre reinforced polymers10.1139/l05-042 ↗
9. FRP materials for the rehabilitation of tubular steel structures, for underwater applications10.1016/j.compstruct.2006.05.029 ↗
10. Axial capacity and design of thin-walled steel SHS strengthened with CFRP10.1016/j.tws.2008.10.006 ↗
11. Strength of circular hollow sections (CHS) tubular beams externally reinforced by carbon FRP sheets in pure bending10.1016/j.tws.2008.10.017 ↗
12. Bond-slip models for double strap joints strengthened by CFRP10.1016/j.compstruct.2009.09.042 ↗
13. Design of CFRP-strengthened steel CHS tubular beams10.1016/j.jcsr.2011.12.004 ↗
14. Finite element analysis of CFRP strengthened steel hollow sections under tension
15. Durability performance of carbon fibre-reinforced polymer strengthened circular hollow steel members under cold weather10.7158/S13-042.2014.15.4 ↗
16. Zhao · 2014
17. Effects of layer orientation of CFRP strengthened steel hollow members
18. Numerical studies on CFRP strengthened steel columns under transverse impact10.1016/j.compstruct.2014.10.022 ↗
19. Environmental durability of externally bonded FRP materials intended for repair of concrete structures10.1016/j.conbuildmat.2010.11.096 ↗
20. Durability of steel/CFRP double strap joints exposed to sea water, cyclic temperature and humidity10.1016/j.compstruct.2012.01.004 ↗
21. Surface pretreatment-the key to durability
22. Adhesive bonding of thick steel adherends for marine structures10.1016/S0951-8339(99)00029-5 ↗
23. Environmental durability of a CFRP system for strengthening steel structures10.1016/j.conbuildmat.2010.02.023 ↗
24. The durability of adhesive joints in the presence of water10.1016/0143-7496(96)00001-2 ↗
25. Durability of CFRP-strengthened concrete members under extreme temperature and humidity10.1080/13287982.2009.11465014 ↗
26. Mechanical characterization of steel/CFRP double strap joints at elevated temperatures10.1016/j.compstruct.2011.01.010 ↗
27. Curing effects on steel/CFRP double strap joints under combined mechanical load, temperature and humidity10.1016/j.conbuildmat.2012.11.035 ↗
28. Galvanic corrosion of carbon and steel in aggressive environments10.1061/(ASCE)1090-0268(2001)5:3(200) ↗
29. Control of corrosion-induced damage in reinforced concrete beams using carbon fiber-reinforced polymer laminates10.1061/(ASCE)1090-0268(2005)9:2(195) ↗
30. Structural performance of corroded RC beams repaired with CFRP sheets10.1016/j.compstruct.2010.01.001 ↗
31. AS1163 · 2009
32. AS1391 · 2007
33. Mechanical characterisation of the dynamic tensile properties of CFRP sheet and adhesive at medium strain rates10.1016/j.compstruct.2012.09.032 ↗
34. Tension behavior of unidirectional glass/epoxy composites under different strain rates10.1016/j.compstruct.2008.06.012 ↗
35. ASTM D3039/D3039M-08 · 2008
36. ASTM D638-10 · 2010
37. Fawzia · 2007
38. Comparative durability study of CFRP strengthened tubular steel members under cold weather
39. BASF Construction Chemicals Australia Pty Ltd. MBrace application guidelines (MBrace Fabric), 11 Stanton road seven hills, NSW 2147, Australia, 2009.
40. Effectiveness of impressed current technique to simulate corrosion of steel reinforcement in concrete10.1061/(ASCE)0899-1561(2003)15:1(41) ↗
41. Blister formation on graphite/polymer composites galvanically coupled with steel in seawater10.1177/002199838902300406 ↗
42. Behaviour under static loading of metallic beams reinforced with a bonded CFRP plate10.1016/j.compstruct.2005.09.004 ↗
43. Experimental and numerical investigation of the behaviour of CFRP strengthened CHS beams subjected to bending10.1016/j.engstruct.2016.01.047 ↗
44. West · 2001
45. Effect of elevated temperature on bond behaviour of high modulus CFRP/steel double-strap joints10.1080/13287982.2009.11465033 ↗
46. Cadei · 2004
47. CNR · 2007