The influences of moisture content variation, number and width of gaps on the withdrawal resistance of self tapping screws inserted in cross laminated timber
Source abstract
Abstract
Abstract A large experimental campaign comprised of 470 withdrawal tests was carried out, aiming to quantify the withdrawal resistance of self-tapping screws (STS) inserted in the side face of cross laminated timber (CLT) elements. In order to deeply understand the “CLT-STS” composite model, the experimental tests considered two main parameters: (i) simple and cyclic changes on moisture content (MC) and (ii) number and width of gaps. Regarding (i), three individual groups of test specimens were stabilized with 8%, 12% and 18% of moisture content and one group was submitted to a six month RH cycle (between 30% and 90% RH). Concerning (ii), different test configurations with 0 (REF), 1, 2 and 3 gaps, and widths equal to 0 mm (GAP0) or 4 mm (GAP4), were tested. The influences of MC and number of gaps were modeled by means of least square method. Moreover, a revision of a prediction model developed by Uibel and Blas (2007) was proposed. The main findings of the experimental campaign were: the decrease of withdrawal resistance for specimens tested with MC = 18% in most configurations; the unexpected increase of withdrawal resistance as the number of gaps with 0 mm increased; and, the surprising increase of withdrawal resistance for REF specimens submitted to the RH cycle.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Wood Treatment and Properties · Bamboo properties and applications · Masonry and Concrete Structural Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Production and technology of cross laminated timber (CLT): a state-of-the-art report
2. Variation of moisture induced movements in Norway spruce (Picea abies)10.1051/forest:2001146 ↗
3. Influence of wood moisture content on bending and shear stiffness of cross laminated timber panels10.1007/s00107-010-0416-z ↗
4. BS EN 1995-1-1:2004+A1:2008 · 2009
5. Moisture gradient as loading of curved timber beams
6. The effect of moisture gradients on tensile strength perpendicular to grain in glulam10.1007/s00107-003-0405-6 ↗
7. Influence of initial moisture induced stresses in multiple steel-to-timber dowel joints10.1007/s00107-006-0136-6 ↗
8. Gereke · 2009
9. Models for the calculation of the withdrawal capacity of self-tapping screws
10. Withdrawal resistance of self-tapping screws in unidirectional and orthogonal layered timber products10.1617/s11527-013-0244-9 ↗
11. Withdrawal capacity of long self-tapping screws parallel to the grain direction
12. Joints with inclined screws
13. Joints with inclined screws and steel plates as outer members
14. Grabner · 2013
15. The influence of moisture content variation on the withdrawal capacity of self-tapping screws
16. Withdrawal resistance of structural screws in Canadian glued laminated timber
17. Base parameters of self-tapping screws
18. Edge joints with dowel type fasteners in cross laminated timber
19. Lateral and withdrawal resistance of typical CLt connections
20. Influence of moisture content and gaps on the withdrawal resistance of self-tapping screws in CLT
21. BS EN 338:2009 · 2009
22. ETA-12/0373: 2012 · 2012
23. BS EN 1382:1999 · 1999
24. Wallner · 2012
25. ISO 13061-1:2014 · 2014
26. BS EN 384:2010 · 2010
27. CUAP 06.03/08 · 2010