Compressive strength of GGBFS based GPC under thermal curing
Source abstract
Abstract
Abstract The exposure of alumino silicate materials such as fly ash, ground granulated blast furnace slag will undergo thermal activation along with alkaline environment and forms an environment friendly material called geopolymer. These materials not only reduce emission of carbon dioxide gas in the atmosphere but also act as a substitute for cement to meet with the future demand. In the present work a sincere attempt was made to produce ground granulated blast furnace slag (GGBFS) based geopolymer concrete (GPC) and to assess its performance by conducting parametric study such as magnitude of temperature, Alkaline liquid (AL) to GGBFS ratio, SiO3 to OH ratio and age of concrete on compressive strength. All the experiments were conducted with a constant sodium hydroxide (NaOH) molarity of 14. Detailed experimental investigations were carried out to assess the effect of the above mentioned parameters under thermal curing with three different curing temperatures of 60, 80 and 100 °C. From the experimental results it was understood that geopolymer concrete with AL/GGBFS = 0.30, SiO3/OH = 1.5 and curing temperature of 80 °C, yielded better compressive strength when compared to all the other combinations used in the present work. Hence use of GGBFS based geopolymer concrete could be feasible for any engineering construction and most preferred for precast construction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Geopolymers: inorganic polymeric new materials
2. Microstructural evidence of reconstituted limestone blocks in the great pyramids of Egypt10.1111/j.1551-2916.2006.01308.x ↗
3. Davidovits · 2008
4. Mechanism of geopolymerization and factors influencing its development: a review10.1007/s10853-006-0401-4 ↗
5. Geopolymerization: a review and prospects for the minerals industry10.1016/j.mineng.2007.07.011 ↗
6. The role of inorganic polymer technology in the development of green concrete10.1016/j.cemconres.2007.08.018 ↗
7. Alkali-activated cements: opportunities and challenges10.1016/S0008-8846(98)00093-3 ↗
8. Reaction mechanisms in the geopolymeric conversion of inorganic waste to useful products10.1016/j.jhazmat.2006.02.044 ↗
9. Geopolymeric inorganic polymeric new materials10.1007/BF01912193 ↗
10. Waste stabilization/solidification of an electric arc furnace dust using fly ash-based geopolymers10.1016/j.fuel.2008.01.021 ↗
11. Dissolution of aluminosilicate materials and byproducts in alkaline media10.1007/s10853-006-0531-8 ↗
12. The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation10.1016/j.cemconres.2004.10.042 ↗
13. Effect of blast furnace slag addition on microstructure and properties of metakaolinite geopolymeric materials10.1002/9781118406892.ch13 ↗
14. Microanalysis of calcium silicate hydrate gel formed within a geopolymeric binder10.1023/A:1025904905176 ↗
15. Fire resistant geopolymer produced by granulated blast furnace slag10.1016/S0892-6875(03)00008-6 ↗
16. Hydration of alkali-activated ground granulated blast furnace slag10.1023/A:1004742027117 ↗
17. Alkali-activated fly ashes, a cement for the future10.1016/S0008-8846(98)00243-9 ↗
18. Alkali-activated fly ash/slag cement, strength behavior and hydration products10.1016/S0008-8846(00)00298-2 ↗
19. Sodium silicate-based, alkali-activated slag mortars: part I. Strength, hydration and microstructure10.1016/S0008-8846(02)00717-2 ↗
20. Effect of the silicate activator pH on the micro structural characteristics of waste-based geopolymers10.1016/S0301-7516(02)00013-3 ↗
21. Geopolymeric materials prepared using class F fly ash and elevated temperature curing10.1016/j.cemconres.2004.06.031 ↗
22. Do geopolymers actually contain nanocrystalline zeolites? A re-examination of existing results10.1021/cm050230i ↗
23. Alkali-activated fly ash: effect of thermal curing conditions on mechanical and micro structural development – part II10.1016/j.fuel.2006.07.010 ↗
24. On the development of fly ash-based geopolymer concrete
25. Effect of alkaline liquid to silica fume and SiO3 to OH ratio on compressive strength of geopolymer concrete
26. Compressive strength of silica fume based geopolymer concrete10.3923/ajaps.2014.240.247 ↗
27. Effect of water-binder ratio on the mechanical properties of calcium hydroxide based alkali-activated slag concrete10.1016/j.conbuildmat.2011.10.062 ↗
28. A comprehensive overview about the influence of different additives on the properties of alkali-activated slag: a guide for civil engineer10.1016/j.conbuildmat.2013.04.011 ↗
29. Effect of addition of Al(OH)3 on the strength of alkaline activated granulated blast furnace slag – ultrafine palm oil fuel ash (AAGU) based binder10.1016/j.conbuildmat.2013.09.054 ↗
30. American Society for Testing and Materials (ASTM), Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate, ASTM C127. ASTM International, West Conshohocken, PA, 2012.
31. American Society for Testing and Materials (ASTM), Standard Test Method for Slump of Hydraulic-Cement Concrete, ASTM C143, ASTM International, West Conshohocken, PA, 2012.
32. American Concrete Institute (ACI), Standard practice for selecting proportions for normal, heavyweight and mass concrete, ACI 211–91, Farmington Hills, MI, USA, 1991.
33. British Standards Institution (BS), Testing Centre, Method for making test cubes from fresh concrete, BS 1881–108, British Standards Institution, 2 Park Street, London W1 A 2BS, 1983.
34. Dissolution processes, hydrolysis and condensation reactions during geopolymer synthesis: part I — low Si/Al ratio systems10.1007/s10853-006-0820-2 ↗
35. Effect of mix composition on compressive strength and microstructure of fly ash based geopolymer composites
36. Influence of aggregate content on the behavior of fly ash based geopolymer concrete10.1016/j.scient.2012.07.006 ↗
37. American Society for Testing and Materials (ASTM), Standard Test Method for Density, Absorption, and Voids in Hardened Concrete. ASTM C642, ASTM International, West Conshohocken, PA, 2013.
38. American Concrete Institute (ACI), Guide to evaluation of strength test results of concrete, ACI 214R–02, American Concrete Institute, Farmington Hills, MI, USA, 2002.