journal article·2017-02

Assessing and understanding the interaction between mechanical and thermal properties in concrete for developing a structural and insulating material

Jose C. Remesar, Sergio Vera, Mauricio Lopez

Publisher page

Abstract

Abstract Highly thermal insulated building envelopes are the base of energy efficient buildings worldwide, however, concrete show poor thermal insulation properties. Developing a structural and thermal insulating concrete is challenging because improving thermal properties undermines mechanical properties. This study aims to understand the interactions between thermal and mechanical properties of concrete (conductivity-to-strength efficiency), when modifying the matrix and aggregate phases by adding fly ash (FA) and coarse and fine lightweight aggregates (LWAs). Based on the ratio fc/λ, the highest efficiency was given by the addition of LWAs (0.017 [W/mK]/MPa) in comparison with the addition of FA (0.008 [W/mK]/MPa). Nevertheless, those efficiencies are highly dependent on the interaction between the aggregate and matrix phases. The optimization of one phase only is not enough to obtain a structural insulating concrete because the thermal conductivity-to-strength efficiency is governed by both, the aggregate and the matrix.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Masonry and Concrete Structural Analysis · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Climate Change 2014: Mitigation of Climate Change
2. IEA · 2013
3. Evaluation of energy efficiency measures for the ecuadorian antarctic station Pedro Vicente Maldonado through a calibrated building energy model10.4067/S0718-50732015000200004 ↗
4. Factors affecting the thermal properties of concrete and applicability of its prediction models10.1016/S0360-1323(01)00061-0 ↗
5. An experimental study on thermal conductivity of concrete10.1016/S0008-8846(02)00965-1 ↗
6. Lamond · 2006
7. Chandra · 2002
8. Popovics · 1998
9. Thermo-mechanical properties of sand and high volume mineral admixtures10.1016/S0378-7788(02)00159-7 ↗
10. ACI Committee 213 · 2013
11. Fly ash effects: I. The morphological effect of fly ash10.1016/S0008-8846(03)00217-5 ↗
12. Bilodeau · 2000 · 41
13. An experimental study on strength development of concrete containing fly ash and optimum usage of fly ash in concrete10.1016/j.cemconres.2004.09.031 ↗
14. Berry · 1981 · 59
15. Langley · 1990 · 507
16. High-performance, high-volume fly ash concrete for sustainable development
17. Influence of mineral admixtures on thermal conductivity and compressive strength of mortar10.1016/S0378-7788(02)00052-X ↗
18. Thermal properties of high-volume fly ash mortars and concretes10.1177/1744259110376613 ↗
19. Mixture proportioning methodology for structural sand-lightweight concrete
20. Practical approach for assessing lightweight aggregate potential for concrete performance
21. Mechanical Properties of High-Strength Lightweight Concrete
22. Development of very low density structural lightweight concrete
23. Holm · 2000
24. Infraleichtbeton10.1002/best.200700605 ↗
25. Influence of the volume fraction and the nature of fine lightweight aggregates on the thermal and mechanical properties of structural concrete10.1016/j.conbuildmat.2013.11.019 ↗
26. Evaluation of thermal conductivity for thermally insulated concretes10.1016/j.enbuild.2013.01.043 ↗
27. Park · 1999
28. Characteristics and properties of lightweight concrete manufactured with cenospheres10.1016/S0008-8846(00)00357-4 ↗
29. The effects of different cement dosages, slumps, and pumice aggregate ratios on the thermal conductivity and density of concrete10.1016/j.cemconres.2003.09.018 ↗
30. The effects of pumice aggregate/cement ratios on the low-strength concrete properties10.1016/j.conbuildmat.2007.01.030 ↗
31. Development of cement-based lightweight composites – Part 1: Mix design methodology and hardened properties10.1016/j.cemconcomp.2013.03.030 ↗
32. Massive volume fly-ash concrete: a more sustainable material with fly ash replacing cement and aggregates10.1016/j.cemconcomp.2015.08.001 ↗
33. ASTM · 2013
34. Microstructural analysis of iberian expanded clay aggregates10.1017/S1431927612000487 ↗
35. Effect of polystyrene aggregate size on strength and moisture migration characteristics of lightweight concrete10.1016/j.cemconcomp.2006.02.018 ↗
36. ASTM · 2006
37. ASTM · 2014
38. Transient plane source techniques for thermal conductivity and thermal diffusivity measurements of solid materials10.1063/1.1142087 ↗
39. ASTM · 2014
41. The pore structure of cement paste blended with fly ash10.1016/j.conbuildmat.2013.04.012 ↗
42. Metha · 2014
43. Malhotra · 2008
44. Influence of curing at different relative humidities upon compound reactions and porosity in Portland cement paste10.1007/BF02473055 ↗
45. Why alite stops hydrating below 80% relative humidity10.1016/j.cemconres.2011.06.001 ↗
46. Thermal conductivity and compressive strength of concrete incorporation with mineral admixtures10.1016/j.buildenv.2006.06.010 ↗
47. Ghoshdastidar · 2012
48. Raman · 2007
49. Pore structure characterization of cement pastes blended with high-volume fly-ash10.1016/j.cemconres.2011.09.012 ↗
50. The path to the high performance thermal building insulation materials and solutions of tomorrow10.1177/1744259110372782 ↗
51. Berge · 2012
52. Analysis of cement pastes and mortars by a combination of backscatter-based SEM image analysis and calculations based on the Powers model10.1016/j.cemconcomp.2004.02.031 ↗
53. Influence of volume fraction and characteristics of lightweight aggregates.pdf10.1016/j.conbuildmat.2009.02.038 ↗
54. Effect of lightweight aggregates on the mechanical properties and brittleness of lightweight aggregate concrete10.1016/j.conbuildmat.2012.02.053 ↗
55. Approximate elastic moduli of lightweight aggregate10.1016/S0008-8846(97)00099-9 ↗
56. Compressive behavior and failure modes of structural lightweight aggregate concrete – characterization and strength prediction10.1016/j.matdes.2012.11.004 ↗
57. Determination of the dividing strength and its relation to the concrete strength in lightweight aggregate concrete10.1016/S0958-9465(98)00035-3 ↗
58. Influence of lightweight aggregate intrinsic strength on compressive strength and modulus of elasticity of lightweight concrete
59. Moreno · 2011
60. Particle size effect on EPS lightweight concrete compressive strength: experimental investigation and modelling10.1016/j.mechmat.2006.05.008 ↗
61. Taking into account the inclusions’ size in lightweight concrete compressive strength prediction10.1016/j.cemconres.2004.06.002 ↗
62. Nguyen · 2013
63. Differential multiphase models for polydispersed spheroidal inclusions: thermal conductivity and effective viscosity10.1016/S0020-7225(99)00016-6 ↗
64. Hochstein · 2013
65. Traditional, state-of-the-art and future thermal building insulation materials and solutions – Properties, requirements and possibilities10.1016/j.enbuild.2011.05.015 ↗
66. A variational approach to the theory of the effective magnetic permeability of multiphase materials10.1063/1.1728579 ↗
67. Thermal conductivity bounds for isotropic, porous materials10.1016/j.ijheatmasstransfer.2004.12.032 ↗
68. Lienhard · 2015