Mechanistic performance evaluation of pavement sections containing RAP and WMA additives in Manitoba
Source abstract
Abstract
Abstract Over recent decades, the utilization of reclaimed asphalt pavement (RAP) and warm mix asphalt (WMA) in mixtures has increased dramatically due to the environmental and economic advantages of these materials. This paper presents the fatigue and rutting characterization of mixtures that contain RAP and/or WMA obtained from Manitoba in Canada. In addition to mechanical testing, numerical simulations of the fatigue cracking and rutting performance of the pavement sections were performed, and the results were compared to field observations. The results obtained from the Layered Viscoelastic pavement analysis for Critical Distresses (LVECD) program and from the field measurements show good agreement, thereby indicating that the LVECD program is able to predict reasonable pavement performance for the RAP and WMA mixtures. The field performance and the predicted performance were used to evaluate the effects of RAP and/or WMA additives on the fatigue cracking and rutting performance of the mixtures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. A. Norouzi, M. Sabouri, Y.R. Kim, Evaluation of the fatigue performance of high RAP asphalt mixtures, in: Proceedings of the 12th International Society for Asphalt Pavements, Raleigh, NC, 2014.
2. Effect of silo storage time on the characteristics of virgin and RAP asphalt mixtures10.3141/2573-10 ↗
3. Fatigue life and endurance limit prediction of asphalt mixtures using energy-based failure criterion
4. A comprehensive evaluation of the fatigue behaviour of plant-produced RAP mixtures10.1080/14680629.2015.1076997 ↗
5. A viscoelastic-based model for predicting the strength of asphalt concrete in direct tension10.1016/j.conbuildmat.2016.06.089 ↗
6. S.A. Safavizadeh, Fatigue and Fracture Characterization of GlasGrid Reinforced Asphalt Concrete Pavement, Doctoral Dissertation, North Carolina State University, Raleigh, NC, 2015.
7. Fatigue and rutting evaluation of laboratory-produced asphalt mixtures containing reclaimed asphalt pavement10.3141/2506-04 ↗
8. Numerical evaluation of pavement design parameters for the fatigue cracking and rutting performance of asphalt pavements
9. Low-temperature properties of plant-produced RAP mixtures in the Northeast10.1080/14680629.2014.926617 ↗
10. Comparison of fatigue cracking performance of asphalt pavements predicted by pavement ME and LVECD programs10.3141/2590-06 ↗
11. Analysis of workflow variability's impacts on trade and project performance10.1016/j.proeng.2016.04.075 ↗
12. Mechanistic evaluation of fatigue cracking in asphalt pavements
13. N. Bower, H. Wen, Evaluation of the Performance of Warm Mix Asphalt in Washington State, Technical Report WA-RD 789.1, 2012.
14. American Association of State Highway Transportation Officials (AASHTO), AASHTO T342, Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt (HMA) using the Asphalt Mixture Performance Tester (AMPT), Washington, DC, AASHTO, 2012.
15. American Association of State Highway Transportation Officials (AASHTO), AASHTO TP 107, Determining the Damage Characteristic Curve of Asphalt Concrete from Direct Tension Cyclic Fatigue Tests, Washington, DC, AASHTO, 2014.
16. Development of calibration testing protocol for permanent deformation model of asphalt concrete10.3141/2373-04 ↗
17. Ruggedness study of dynamic modulus testing of asphalt concrete in indirect tension mode10.1520/JTE20150118 ↗
18. Improved calculation method of damage parameter in viscoelastic continuum damage model10.1080/10298430903398088 ↗
19. Development of a failure criterion for asphalt mixtures under different modes of fatigue loading10.3141/2447-13 ↗
20. A. Safavizadeh, Y.R. Kim, Mode II fatigue and reflective cracking performance of glasgrid-reinforced asphalt concrete under repeated loading, in: Proceedings of the 12th ISAP Conference on Asphalt Pavements, Raleigh, NC, 2014, pp. 1893–1902.10.1201/b17219-228 ↗
21. Linking asphalt binder fatigue to asphalt mixture fatigue performance using viscoelastic continuum damage modeling
22. Properties of aged asphalt binder related to asphalt concrete fatigue life
23. Performance predictions of rutting for the National Center for Asphalt Technology test track10.3141/2457-05 ↗
24. American Association of State Highway Transportation Officials (AASHTO), AASHTO TP 79–10: Standard Method of Test for Determining Dynamic Modulus and Flow Number for Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT), AASHTO, Washington, DC, 2011.
25. Incremental model for permanent deformation of asphalt concrete in compression10.3141/2296-03 ↗
26. M. Eslaminia, S. Thirunavukkarasu, M.N. Guddati, Y.R. Kim, Accelerated pavement performance modeling using layered viscoelastic analysis, in: Proceedings of the 7th International RILEM Conference on Cracking in Pavements, Delft, The Netherlands, 2012.10.1007/978-94-007-4566-7_48 ↗
27. Determining specimen geometry of cylindrical specimens for direct tension fatigue testing of asphalt concrete10.1520/JTE20140357 ↗
28. Effects of additives for warm mix asphalt on performance grades of asphalt binders10.1520/JTE104279 ↗
29. Fatigue performance prediction of North Carolina mixtures using simplified viscoelastic continuum damage model
30. Performance evaluation of field-produced warm-mix asphalt mixtures in Manitoba, Canada10.3141/2294-07 ↗
31. Advanced Research Associates, 2002 Design Guide: Design of New and Rehabilitated Pavement Structures, NCHRP 1-37A Project, National Cooperative Highway Research Program (NCHRP), National Research Council, Washington, DC, 2004.
32. Permanent deformation characterization of asphalt mixtures using minimum strain rate, LVECD program, and triaxial stress sweep test10.3141/2631-11 ↗
33. K. Tseng, R. Lytton, Prediction of permanent deformation in flexible pavement materials, in: Implication of Aggregates in the Design, Construction, and Performance of Flexible Pavements, ASTM STP 1016, ASTM, 1989, pp. 154–172.10.1520/STP24562S ↗