Use of imaging technique and direct tensile test to evaluate moisture damage properties of warm mix asphalt using response surface method
Source abstract
Abstract
Abstract This paper presents a 3-D imaging technique to quantify the adhesion failure due to moisture on the fractured surfaces of WMA mixtures that were tested for direct tensile strength (DTS). An experimental matrix was developed based on the central composite design for two factors: mixing temperatures of WMA and test temperatures (5 °C, 15 °C and 25 °C) of specimens. Specimens were subjected to 1 Freeze-Thaw (F-T) cycle prior to testing. Adhesion failure and strength behavior of the specimens were analyzed using the Response Surface Method. The effects of mixing and test temperatures on the percent adhesion failure, DTS and fracture energy of WMA were found to be significant. Adhesion failures of WMA prepared with polymer modified binder were lower than mixtures prepared with unmodified binder. At higher mixing temperature, lower percent adhesion failure was observed, while at lower mixing temperature, lower DTS was obtained. Lower adhesion failure and DTS were observed at higher test temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Effect of aggregate properties on asphalt mixtures stripping and creep behavior10.1016/j.conbuildmat.2005.07.014 ↗
2. Obaidat · 1999
3. Evaluating the effect of warm-mix asphalt technologies on moisture characteristics of asphalt binders and mixtures10.3141/2209-07 ↗
4. Lottman · 2001
5. Imaging-based detection of AAR induced map-crack damage in concrete structure10.1016/j.ndteint.2010.04.007 ↗
6. Quantification of moisture sensitivity of warm mix asphalt using image analysis technique10.1016/j.jclepro.2013.12.072 ↗
7. Aggregate structure characterisation of asphalt mixtures using two-dimensional image analysis10.1080/14680629.2012.711923 ↗
8. Y. Hao, Y. Hai-Wen, L. Yuan-Quan, Z. Hai-Xia, Z. Lei, Air voids measurement on asphalt mixes section surface based on image analysis, In: Electronic Measurement & Instruments, 2009, ICEMI’09, 9th International Conference on, pp. 4–296, IEEE.10.1109/ICEMI.2009.5274050 ↗
9. Characterisation of micro-structural damage in asphalt mixtures using image analysis10.1016/j.conbuildmat.2013.12.047 ↗
10. Estimation of grain size in asphalt samples using digital image analysis
11. Image analysis for detecting aggregate gradation in asphalt mixture from planar images10.1016/j.conbuildmat.2011.08.007 ↗
12. Moisture susceptibility evaluation of asphalt mixes based on image analysis10.1016/j.conbuildmat.2014.04.012 ↗
13. Observation and evaluation of the degree of blending of reclaimed asphalt concretes using microscopy image analysis10.1016/j.conbuildmat.2012.07.048 ↗
14. Use of cyclic direct tension tests and digital imaging analysis to evaluate moisture susceptibility of warm-mix asphalt concrete10.3141/2372-08 ↗
15. Azari · 2010
16. Coating and stripping of bitumen-aggregate mixtures
17. D3625-96: Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water
18. 2007
19. 2002
20. Effect of water on cohesion of compacted bituminous mixtures
21. 2011
22. Research on fracture characteristic of gneiss prepared asphalt mixture with direct tensile test10.1016/j.conbuildmat.2011.08.053 ↗
23. Analytical modeling and experimental study of tensile strength of asphalt concrete composite at low temperatures10.1016/S1359-8368(03)00079-9 ↗
24. Bituminous mixtures, Test methods for hot mix asphalt. Determination of the indirect tensile strength of bituminous specimens, 93.080. 20 (Road construction materials), EN, B. 12697–23, 2003.
25. The combined effects of aging and moisture conditioning on the indirect tensile strength, flow and fracture energy of warm mix asphalt10.1201/b18538-38 ↗
26. Laboratory evaluation of resistance to moisture damage in asphalt mixtures10.1016/j.asej.2012.10.009 ↗
27. Evaluation of moisture damage in hot mix asphalt using simple performance and superpave indirect tensile tests10.1016/j.conbuildmat.2007.07.014 ↗
28. Laboratory evaluation of warm-mix asphalt mixtures for moisture and rutting susceptibility10.1061/(ASCE)MT.1943-5533.0001121 ↗
29. Hydrated lime effect on moisture susceptibility of warm mix asphalt10.1016/j.conbuildmat.2012.04.073 ↗
30. Laboratory investigation of moisture damage in rubberised asphalt mixtures containing reclaimed asphalt pavement10.1080/10298430802169432 ↗
31. Laboratory investigation of moisture susceptibility of long-term saturated warm mix asphalt mixtures10.1080/10298436.2011.585649 ↗
32. Combined (alkaline+ ultrasonic) pretreatment effect on sewage sludge disintegration10.1016/j.watres.2010.02.032 ↗
33. Organics removal from dairy wastewater by electrochemical treatment and residue disposal10.1016/j.seppur.2010.10.008 ↗
34. Optimisation of steel fibre reinforced concretes by means of statistical response surface method10.1016/S0958-9465(03)00161-6 ↗
35. Consideration of fatigue life optimization of pulley in power-steering system10.1016/j.msea.2006.09.188 ↗
36. Development of response surface model for tensile shear strength of weld-bonds of aluminium alloy 6061 T65110.1016/j.matdes.2011.05.025 ↗
37. Optimizing the torrefaction of mixed softwood by response surface methodology for biomass upgrading to high energy density10.1016/j.biortech.2012.03.122 ↗
38. Optimization of foundry sand characteristics of soda-activated calcium bentonite10.1016/j.clay.2011.02.005 ↗
39. Determination of the optimum binder content of warm mix asphalt incorporating Rediset using response surface method10.1016/j.conbuildmat.2013.06.023 ↗
40. Estimation of optimum binder content of recycled asphalt incorporating a wax warm additive using response surface method
41. Effect of grading and lime content on HMA stripping using statistical methodology10.1016/j.conbuildmat.2012.02.025 ↗
42. Application of response surface methodology to evaluate stone matrix asphalt stripping potential10.1007/s12205-013-1698-6 ↗
43. Stiffness modulus of Polyethylene Terephthalate modified asphalt mixture: a statistical analysis of the laboratory testing results10.1016/j.matdes.2014.11.044 ↗
44. 2008
45. Evaluation of Evotherm for use in warm mix asphalt
46. Buss · 2011
47. MeadWestvaco.2012 “Evotherm® Warm Mix Asphalt”, Accessed on January, 2014, from MeadWestvaco: .
48. 2006
49. 2006
50. R.G. Hicks, L. Santucci, T. Aschenbrener, Introduction and seminar objectives, in: Moisture Sensitivity of Asphalt Pavements – a National Seminar, San Diego, California, 2003, pp. 3–20.
51. Development of a flattened indirect tension test for asphalt concrete
52. AUTODESK®123D®, Accessed on February, 2015, from .
53. CloudCompare, Accessed on February, 2015, from .
54. Mason · 2003 · vol. 474
55. Khuri · 1996 · vol. 152
56. Del Vecchio · 1997
57. Low temperature binder-aggregate adhesion and mechanistic characteristics of polymer modified asphalt mixtures10.1061/(ASCE)0899-1561(2007)19:5(411) ↗
58. The effect of polymer modification on hot mix asphalt fracture at tensile loading conditions10.1080/10298436.2010.488735 ↗
59. Relating adhesion and cohesion of asphalts to the effect of moisture on laboratory performance of asphalt mixtures10.1177/0361198105190100105 ↗