Experimental investigation of physical properties and accelerated sunlight-healing performance of flake graphite and exfoliated graphite nanoplatelet modified asphalt materials
Source abstract
Abstract
Abstract This presented research investigated the physical properties and accelerated sunlight-healing performance of graphite modified asphalt materials. Two types of graphite materials, flake graphite and exfoliated graphite nanoplatelets (xGNP), were added to asphalt with different contents by weight. Asphalt binder tests were conducted to evaluate the performance of modified asphalt, including rotational viscosity, light absorbance, and thermal conductivity. The tests results of graphite modified asphalt showed increased viscosities, decreased activation energies, and increased light absorbance and thermal conductivity in comparison to the control asphalt. Afterwards, the graphite modified asphalt mixture beams (5% flake graphite and 2% xGNP) were prepared and used for cyclic fracture-light healing tests. The digital image correlation (DIC) was utilized to characterize the displacement changes in the fracture zone during the light healing process. The DIC results indicated that the improved healing performance of graphite modified asphalt mixtures and decreased healing displacement with light healing cycles. Finally, the measured recovered strength after each cycle was used to evaluate the healing performance of both the graphite modified and control samples. The results of cyclic fracture-light healing tests indicated that the graphite modified asphalt materials have significantly improved healing performance and therefore these materials have promises in promoting new light healing applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Innovative concrete reinforcement materials · Infrastructure Maintenance and Monitoring
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. FHWA, Highway Statistics 2000, F.H.A.W. Office of Highway Policy Information, D.C., Editor, 2001.
2. Performance of asphalt binder blended with non-modified and polymer-modified nanoclay10.1016/j.conbuildmat.2012.02.056 ↗
3. Investigation of induction healing effects on electrically conductive asphalt mastic and asphalt concrete beams through fracture-healing tests10.1016/j.conbuildmat.2013.08.089 ↗
4. Induction heating of mastic containing conductive fibers and fillers10.1617/s11527-010-9644-2 ↗
5. Kneepkens · 2004
6. A simple model to define induction heating in asphalt mastic10.1016/j.conbuildmat.2011.12.046 ↗
7. Optimization of composition and mixing process of a self-healing porous asphalt10.1016/j.conbuildmat.2011.11.034 ↗
8. Fatigue and healing characterization of asphalt mixtures10.1061/(ASCE)0899-1561(2003)15:1(75) ↗
9. Self-healing of open cracks in asphalt mastic10.1016/j.fuel.2011.09.009 ↗
10. Y. Zhao, H.G. Machel, Determination of the Viscosities of Grosmont Reservoir Bitumen, Alberta, Canada, in: CSP CSEG CWLS Convention, Calgary, Canada, 2009.
11. Dissipated energy approach to study hot-mix asphalt healing in fatigue10.1177/0361198106197000119 ↗
12. The effects of temperature and shear rate on the apparent viscosity of Nigerian oil sand bitumen10.1016/S0378-3820(99)00014-4 ↗
13. Non-Newtonian viscosity of polymer-modified bitumens10.1007/BF02472233 ↗
14. Characterization of fatigue and healing in asphalt binders10.1061/(ASCE)MT.1943-5533.0000080 ↗
15. Evaluating self healing capability of bituminous mastics10.1007/s11340-011-9573-1 ↗
16. Use of molecular dynamics to investigate self-healing mechanisms in asphalt binders10.1061/(ASCE)MT.1943-5533.0000200 ↗
17. Determination of thermal properties of asphalt mixtures10.1520/JTE12592 ↗
18. Performance and thermal evaluation of incorporating waste ceramic aggregates in wearing layer of asphalt pavement10.1061/(ASCE)MT.1943-5533.0000788 ↗
19. High latent heat storage and high thermal conductive phase change materials using exfoliated graphite nanoplatelets10.1016/j.solmat.2008.09.010 ↗
20. Graphite blocks with high thermal conductivity derived from natural graphite flake10.1016/j.carbon.2007.11.050 ↗
21. Enhancement of thermal energy transport across graphene/graphite and polymer interfaces: a molecular dynamics study10.1002/adfm.201103048 ↗
22. Laboratory study on solar collector of thermal conductive asphalt concrete
23. Study of ice and snow melting process on conductive asphalt solar collector10.1016/j.solmat.2011.07.013 ↗
24. Numerical simulation on the thermal response of heat-conducting asphalt pavements10.1088/0031-8949/2010/T139/014041 ↗
25. Influence of graphite on the thermal characteristics and anti-ageing properties of asphalt binder10.1016/j.conbuildmat.2014.06.069 ↗
26. Dally · 2005
27. Direct extraction of cohesive fracture properties from digital image correlation: a hybrid inverse technique10.1007/s11340-010-9342-6 ↗
28. Digital image correlation analysis of crack behavior in a reinforced concrete beam during a load test10.1139/l06-106 ↗
29. Viscoelastoplastic damage characterization of asphalt–aggregate mixtures using digital image correlation10.1061/(ASCE)1532-3641(2007)7:2(111) ↗
30. Real-time water permeability evolution of a localized crack in concrete under loading10.1016/j.cemconres.2013.09.010 ↗
31. Viscosity, plasticity, and diffusion as examples of absolute reaction rates10.1063/1.1749836 ↗
32. D. Salomon, H. Zhai, Asphalt binder flow activation energy and its significance for compaction effort, in: Proc., 3rd Eurasphalt & Eurobitume Congress, 2004.
33. Arrhenius · 1889
34. D5334-14 · 2014
35. The measurement of thermal conductivity of solids with a transient linear heat source on the plane surface of a poorly conducting body10.1016/0012-821X(85)90027-5 ↗
36. Jones · 2013
37. Mathworks · 2012