journal article·2017-03

Ductility enhancement of autoclaved cellulose fiber reinforced cement boards manufactured using a laboratory method simulating the Hatschek process

Alireza Akhavan, Jeffrey Catchmark, Farshad Rajabipour

Publisher page

Abstract

Abstract Autoclaved fiber cement (FC) boards manufactured using the Hatschek process are commonly used as building products such as siding and shingles. Despite their advantages, these products may exhibit low ductility and volume instability. A common, yet expensive, method for improving ductility is increasing the fiber content. In this study, a procedure to manufacture FC boards in the laboratory was introduced, and alternative economical methods for increasing the boards’ ductility were investigated. Ductility was measured using a 3-point or 4-point bending tests, while the microstructure of the boards was studied using scanning electron microscopy. The results show that ductility of FC boards was improved by reducing their matrix tensile strength. This was achieved by reducing the density (increasing porosity) of FC boards or by partially replacing Portland cement with fly ash. Fiber mineralization was not found to be the cause of brittleness in the investigated FC boards.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovations in Concrete and Construction Materials · Natural Fiber Reinforced Composites · Hygrothermal properties of building materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. J.S. Cottier, G. Brunton, R. Lyons, Method and apparatus for forming a laminated sheet material by spattering, US Patent US6824715 B2, 2001.
2. Mobasher · 2011
3. Mindess · 2003
4. Tobermorite formation in the system CaO-C3S-SiO2-Al2O3-NaOH-H2O under hydrothermal conditions10.1016/0008-8846(93)90097-S ↗
5. Calcium silicate structure and carbonation shrinkage of a tobermorite-based material10.1016/j.cemconres.2003.12.016 ↗
6. Bonding in wood fibre-cement composites10.1007/BF00549827 ↗
7. Microstructure of autoclaved refined wood-fibre cement mortars10.1007/BF00540809 ↗
8. Durability of kraft pulp fiber–cement composites to wet/dry cycling10.1016/j.cemconcomp.2004.07.006 ↗
9. F.A. Silva, J.A. Melo Filho, R.D. Toledo Filho, E.M.R. Fairbairn, Mechanical behavior and durability of compression moulded sisal fiber-cement mortar laminates (SFCML). In: Proc. 1st International RILEM Symposium on Textile Reinforced Concrete, 2006, pp. 171–180.10.1617/2351580087.017 ↗
10. The microstructure and ageing of cellulose fibre-reinforced cement composites cured in a normal environment10.1016/0262-5075(89)90120-6 ↗
11. Durability of alkali-sensitive sisal and coconut fibers in cement mortar composites10.1016/S0958-9465(99)00039-6 ↗
12. Ground blast-furnace slag as a matrix for cellulose cement materials10.1016/S0958-9465(00)00083-4 ↗
13. Methods for reducing the tendency towards embrittlement in sisal fibre concrete
14. Use of plasticized sulphur in sisal fibre concrete
15. New economical solutions for improvement of durability of Portland cement mortars reinforced with sisal fibers10.1007/BF02472258 ↗
16. Statistical evaluation of long-term durability characteristics of cellulose fiber reinforced cement composites
17. Vegetable fiber cement composites, vegetable plants and their fibres as building materials
18. Durability of blast-furnace-slag-based cement mortar reinforced with coir fibres, vegetable plants and their fibres as building materials
19. Durability of thermomechanical pulp fiber-cement composites to wet/dry cycling10.1016/j.cemconres.2005.04.005 ↗
20. Long-term durability and moisture sensitivity of cellulose fiber-reinforced cement composites
21. Micromechanics-based durability study of cellulose cement in flexure10.1016/S0008-8846(98)00092-1 ↗
22. Microstructural and chemical effects of wet/dry cycling on pulp fiber–cement composites10.1016/j.cemconres.2006.03.020 ↗
23. Aging mechanisms in cellulose fiber reinforced cement composites10.1016/S0958-9465(98)00050-X ↗
24. Accelerated durability testing of autoclaved wood fibre-reinforced cement-sheet composites
25. The effect of limestone powder, silica fume and fibre content on flexural behaviour of cement composite reinforced by waste kraft pulp10.1016/j.conbuildmat.2013.03.099 ↗
26. Balaguru · 1992
27. Characterization of high performance fiber reinforced cement composites-HPFRCC, High Performance Fiber Reinforced Cement Composites 2 (HPFRCC 2)
28. Conditions for pseudo strain-hardening in fiber reinforced brittle matrix composites10.1115/1.3119767 ↗
29. Steady-state and multiple cracking of short random fiber composites10.1061/(ASCE)0733-9399(1992)118:11(2246) ↗
30. The mechanics of matrix cracking in brittle-matrix fiber composites10.1016/0001-6160(85)90124-5 ↗
31. Tensile strain hardening and multiple cracking in high-performance cement-based composites containing discontinuous fibers
32. Effect of inclining angle, bundling, and surface treatment on synthetic fiber pull-out from a cement matrix10.1016/0010-4361(90)90005-H ↗
33. ISO 302:2004 Pulps-determination of kappa number, ICS: 85.040.
34. Effects of natural weathering on microstructure and mineral composition of cementitious roofing tiles reinforced with fique fibre10.1016/j.cemconcomp.2010.10.013 ↗
35. Improved durability of vegetable fiber reinforced cement composite subject to accelerated carbonation at early age10.1016/j.cemconcomp.2013.05.001 ↗
36. Durability characteristics of CO2-cured cellulose fiber reinforced cement composites10.1016/j.conbuildmat.2012.02.016 ↗
37. ASTM C642–13, Standard test method for density, absorption, and voids in hardened concrete, ASTM International.
38. ASTM C293/C293M-10, Standard test method for flexural strength of concrete (using simple beam with center-point loading), ASTM International.
39. Development of vegetable fibre–mortar composites of improved durability10.1016/S0958-9465(02)00018-5 ↗
40. Durability of alkali-sensitive fibres in concrete