journal article·2017-08

Effect of freeze-thaw cycles on concrete reinforced with basalt-fiber reinforced polymers (BFRP) bars

Mohamed-Akram Khanfour, Ahmed El Refai

Publisher page

Abstract

Abstract This paper examines the performance of concrete beams internally reinforced with basalt fiber-reinforced polymers (BFRP) bars after being subjected to freeze-thaw (FT) cycles. Prior to beam testing, pullout specimens were tested after being exposed to 100 and 200 FT cycles and to a freezing temperature of −20 °C. The pullout test results showed that FT cycles had a slight effect on the bond strength of the BFRP bars. Both unconditioned and conditioned specimens showed similar bond stress-slip relationships and comparable bond strengths. Exposing the pullout specimens to low temperature resulted in a decrease of 10% in their bond strength. In the beam tests, half of the beams were subjected to 200 FT cycles prior to testing whereas the remaining beams were tested at room temperature. The test parameters included the reinforcement ratio, the shear span-to-depth ratios, a / d , and the environmental conditioning. It was observed that conditioning changed the mode of failure of some of the tested beams as compared to that of their unconditioned counterparts. The effect of conditioning on the failure mode was less pronounced in the over-reinforced beams with a / d > 2.5. Conditioning under- and over-reinforced beams with a / d = 2.5 resulted in reductions of 7.4 and 13.4%, respectively, in their load carrying capacities. FT conditioning had a slight effect on the ductility of the tested beams regardless of their a / d ratio or their internal reinforcement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Smart Materials for Construction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. ACI (American Concrete Institute), Guide test methods for fiber- reinforced polymers (FRPs) for reinforcing or strengthening concrete structures, ACI 440.3R-04, Farmington Hills, MI, 2004.
2. Bond degradation of basalt fiber-reinforced polymer (BFRP) bars exposed to accelerated aging conditions10.1016/j.conbuildmat.2015.02.036 ↗
3. Alvarez · 2004
4. The effect of material degradation on bond properties of fiber reinforced plastic reinforcing bars in concrete
5. Bond durability of FRP bars embedded in fiber-reinforced concrete10.1061/(ASCE)CC.1943-5614.0000270 ↗
6. Canadian Standards Association – CSA, Canadian highway bridge design code, CSA-S6-10, Mississauga, ON, Canada, 2010.
7. Canadian Standards Association – CSA, Design and construction of building components with fiber-reinforced polymers, CSA-S806-12, Mississauga, ON, Canada, 2012.
8. Accelerated aging tests for evaluations of durability performance of FRP reinforcing bars for concrete structures10.1016/j.compstruct.2005.08.015 ↗
9. Effect of FRP bar degradation on interface bond with high strength concrete10.1016/j.cemconcomp.2008.05.006 ↗
10. Bond durability of basalt fiber–reinforced polymer bars embedded in concrete under direct pullout conditions
11. Bond performance of basalt fiber-reinforced polymer bars to concrete
12. Flexural behaviour of concrete beams reinforced with ribbed basalt-FRP bars under static loads
13. Response of fiber reinforced polymer confined concrete exposed to freeze and freeze-thaw regimes10.1061/(ASCE)1090-0268(2002)6:1(35) ↗
14. Experimental response and code modelling of continuous concrete slabs reinforced with BFRP bars10.1016/j.compstruct.2013.08.029 ↗
15. Transverse thermal expansion of FRP bars embedded in concrete10.1061/(ASCE)1090-0268(2005)9:5(377) ↗
16. Serviceability and ultimate load behavior of concrete beams reinforced with basalt fiber-reinforced polymer bars10.14359/51688752 ↗
17. Behavior of CFRP-prestressed concrete beams under high-cycle fatigue at low temperature10.1061/(ASCE)CC.1943-5614.0000190 ↗
18. Mechanical characterization of basalt FRP rebars and long-term strength predictive model
19. Durability of AR glass fiber reinforced plastic bars10.1061/(ASCE)1090-0268(1999)3:1(12) ↗
20. Performance of concrete beams reinforced with basalt FRP for flexure and shear
21. Analysis of concrete internal deterioration due to frost action10.1177/1744259110370854 ↗