Timber moment connections using glued-in basalt FRP rods
Source abstract
Abstract
Abstract Glued-in rods offer an alternative method for creating structural timber connections however despite decades of research they have had limited implementation. The behaviour of glued-in rod connections in a framed structure was investigated. Nine partial frames were constructed of box sections connected with 12 mm diameter BFRP rods. A theoretical design approach was developed based on the optimum observed behaviour, where failure was located in the connection. For specimens with two embedded rods the theory predicted strength within 16% error of the experimental results. For specimens with two rods but gave an over-prediction of strength where three rods were used.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Engineering and Vibration Analysis · Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. D. Smedley, P. Alam, M. Ansell, George Street, St. Albans, UK–a case study in the repair of historic timber structures using bonded-in pultruded plates, … of 9th World Conference on Timber …, no. 2006, 2006.
2. Mechanical repair of timber beams fractured in flexure using bonded-in reinforcements10.1016/j.compositesb.2008.11.010 ↗
3. E. Gehri, High performing jointing technique using glued-in rods, in: 11th World Conference on Timber Engineering 2010, WCTE 2010, 2010.
4. Bonded-in rod connections for timber structures—development of design methods and test observations10.1016/S0143-7496(01)00036-7 ↗
5. J.G. Broughton, A.R. Hutchinson, LICONS Task 2-Sub tast 2.2, 2004.
6. Yeboah · 2012
7. Basalt fibre reinforced polymer rods for glued connections in low grade timber
8. EN 338 · 2009
9. EN 408 · 2012
10. Magmatech, RockBar Corrosion resistant basalt fibre reinforcing bars, 2013. Technical information leaflet. [Online]. Available: http://magmatech.co.uk/downloads/ROCKBAR_4P.pdf.
11. Rotafix Ltd, Rotafix Structural Adhesive (LM) – Epoxy Bonding Adhesive, 2015.
12. Deutsches Institut für Normung e.V, DIN 1052. Entwurf, Berechnung und Bemessung von Holzbauwerken – Allgemeine Bemessungsregeln und Bemessungsregeln für den Hochbau. Berlin, Germany, 2008.
13. J. Brady, A. Harte, Flexural reinforcement of glue-laminated timber beams using prestressed FRP plates, in: 4th International Conference of Advanced Composites in Construction (ACIC), 2008.
14. Bending strength of lumber10.1061/(ASCE)0733-9445(1990)116:5(1213) ↗
15. Patrick · 2004
16. EN 1995-1-1 · 2008
17. Coillte Panel Products, SmartPly OSB3 Data Sheet, 2013.
18. AS Latvijas Finieris, Plywood Handbook, 2010.
19. Provisions for ductile behavior of timber-to steel connections with multiple glued-in rods10.1061/(ASCE)ST.1943-541X.0000735 ↗
20. Timber joints with multiple glued-in steel rods10.1080/00218464.2015.1099098 ↗
21. Ductile behaviour and group effect of glued-in steel rods