Behaviour of high-strength concrete columns confined by spiral reinforcement under uniaxial compression
Source abstract
Abstract
Abstract This paper presents the results of an experimental program investigating the behaviour of confined high-strength concrete. Eighteen high strength concrete circular columns confined by spiral reinforcement were tested under axial compression. The test variables included concrete compression strength, the spacing of the spiral reinforcement and specimen height. The influence of the size of the effect on the behaviour of the confined concrete was investigated. Four confined concrete models which are defined in the literature were used to predict peak stress and strain of the core concrete (Mander et al., 1988; Fafitis & Shah, 1985; Razvi & Saatcioglu, 1999; Legeron & Paultre, 2003). A comparative study of the stress-strain model with the test results indicated that the models used in this study all produced a conservative prediction for the ductility of confined high strength concrete. The model proposed by Fafitis & Shah 1985 can make a more accurate prediction with standard deviation 3.92% and 21.88% in peak stress and strain, respectively, compared to predictions made by other models.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. V. Mohan Malhotra, Concrete Microstructure, Properties, and Materials, Canada Center for Mineral and Energy Technology, Ottawa, Canada.
2. Behavior of confined high strength concrete columns under axial compression10.3151/jact.3.267 ↗
3. Richart · 1928
4. Strength and ductility of tied concrete columns10.1061/JSDEAG.0005416 ↗
5. Theoretical stress-strain model for confined concrete10.1061/(ASCE)0733-9445(1988)114:8(1804) ↗
6. T. Nagashima, S. Sugano, H. Kimura, A. Ichikawa, Monotonic axial compression test on ultra-high strength concrete tied columns, in: Proceedings of 10th World Conference on Earthquake Engineering, 1992.
7. Confinement model for high strength concrete10.1061/(ASCE)0733-9445(1999)125:3(281) ↗
8. Stress-strain model for confined high strength concrete10.1061/(ASCE)0733-9445(1995)121:3(468) ↗
9. Uniaxial confinement model for normal and high strength concrete columns10.1061/(ASCE)0733-9445(2003)129:2(241) ↗
10. Li · 1994
11. L. Bjerkli, A. Tomaszewicz, J.J. Jansen, Deformation properties and ductility of high strength concrete, in: Proceedings of Second International Symposium on Utilization of High Strength Concrete, Berkley, California, 1990, 215–238.
12. S. Martinez, A.H. Nilson, F.O. Slate, Spirally reinforced high-strength concrete columns, Res. Rep. No. 82-10, Dept. of Struct. Engrg., Cornell University, Ithaca, N.Y., 1982, p. 255.
13. A. Fafitis, S.P. Shah, Lateral reinforcement for high strength concrete columns, SP-87-12, ACI, Detroit, 1985, pp. 213–232.
14. H. Nakamura, T. Higai, Compressive fracture energy and fracture zone length of concrete, in: Seminar on Post-Peak Behavior of RC Structures Subjected to Seismic Loads, Japan Concrete Institute, Tokyo, Japan, 1999, pp. 259–272.
15. Effect of length on compressive strain softening of concrete10.1061/(ASCE)0733-9399(1997)123:1(25) ↗
16. Strain localization in confined high-strength concrete columns10.1061/(ASCE)0733-9445(1996)122:9(1055) ↗
17. Stress-averaged strain model for confined high-strength concrete
18. Foster · 1999
19. Strength and ductility of fiber reinforced high strength concrete columns10.1061/(ASCE)0733-9445(2001)127:1(28) ↗
20. Strength and ductility of confined concrete10.1061/(ASCE)0733-9445(1992)118:6(1590) ↗