journal article·2018-01

Recovery of asphalt mixture stiffness during fatigue loading rest periods

Hassan Baaj, Peter Mikhailenko, Haya Almutairi, Herve Di Benedetto

Publisher page

Abstract

Abstract Asphalt is a self-healing material that has the ability to restore part of its stiffness and strength during rest periods and elevated temperatures, leading to a significant extension in service life. The self-healing of asphalt mixtures has been investigated in this paper using a modified tension-compression fatigue test. Asphalt mixture specimens, prepared with different binders (neat and SBS polymer modified) and gradations, were sinusoidally loaded in strain control mode, with a rest period being introduced at the end of each loading period. Rest period temperatures varied at 0, 10 and 20 °C. This loading-rest sequence was repeated three or four times. For some tests, the samples were loaded to complete failure after the final rest period. The asphalt mixture with the polymer modified asphalt had much better resistance to fatigue loading compared to the samples with neat binder. The stiffness of the sample represented by the norm of complex modulus (|E∗|) showed an increase during the rest periods. The fatigue life in terms of number of loading cycles was higher with an increase in rest time temperatures. Moreover, the fatigue life values of the samples with rest periods were significantly higher than for continuously loaded samples loaded under the same conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Monitoring fatigue damage and crack healing by ultrasound wave velocity10.1080/10589750500206774 ↗
2. Low-temperature thermal cracking of asphalt binders as ranked by strength and fracture properties10.3141/1766-01 ↗
3. Baaj, H., 2002. Comportement à la fatigue des matériaux granulaires traités aux liants hydrocarbonés (PhD Thesis). INSA Lyon.
4. Effect of binder characteristics on fatigue of asphalt pavement using an intrinsic damage approach10.1080/14680629.2005.9690003 ↗
5. Softening and local self-heating of bituminous mixtures during cyclic loading
6. Use of molecular dynamics to investigate self-healing mechanisms in asphalt binders10.1061/(ASCE)MT.1943-5533.0000200 ↗
7. Better assessment of bituminous materials lifetime accounting for the influence of rest periods10.1080/14680629.2005.9690004 ↗
8. Retardation and repair of fatigue cracks in a microcapsule toughened epoxy composite—Part II: in situ self-healing10.1016/j.compscitech.2005.04.053 ↗
9. Dissipated energy approach to study hot-mix asphalt healing in fatigue10.1177/0361198106197000119 ↗
10. Fatigue and healing of asphalt mixtures: discriminate analysis of fatigue curves10.1061/(ASCE)0733-947X(2006)132:2(168) ↗
11. Development of a test method for evaluation and quantification of healing in asphalt mixture10.1080/14680629.2013.844196 ↗
12. Linear Viscoelastic Behaviour and Anisotropy of Bituminous Mixture Compacted with a French Wheel Compactor
13. Laboratory evaluation of fatigue damage and healing of asphalt mixtures10.1061/(ASCE)0899-1561(2001)13:6(434) ↗
14. Nonlinearity, heating, fatigue and thixotropy during cyclic loading of asphalt mixtures10.1080/14680629.2011.9690356 ↗
15. Fatigue of bituminous mixtures10.1007/BF02481620 ↗
16. Influence of transient effects for analysis of complex modulus tests on bituminous mixtures10.1080/14680629.2015.1067246 ↗
17. Grant, T.P., 2001. Determination of asphalt mixture healing rate using the Superpave indirect tensile test (Master’s Thesis). University of Florida.
18. Cost analysis for use of SBS modifier in asphalt pavement using a performance-based fracture criterion10.1080/14680629.2008.9690139 ↗
19. Fatigue and healing characterization of asphalt mixtures10.1061/(ASCE)0899-1561(2003)15:1(75) ↗
20. Induction healing of asphalt mastic and porous asphalt concrete10.1016/j.conbuildmat.2011.04.016 ↗
21. Quantification of biasing effects during fatigue tests on asphalt mixes: non-linearity, self-heating and thixotropy10.1080/14680629.2015.1077000 ↗
22. Validation of the time–temperature superposition principle for crack propagation in bituminous mixtures10.1617/s11527-012-9954-7 ↗
23. Effect of fatigue cyclic loading on the linear viscoelastic properties of bituminous mixtures10.1061/(ASCE)MT.1943-5533.0000996 ↗
24. Time temperature superposition principle validation for bituminous mixes in the linear and nonlinear domains10.1061/(ASCE)MT.1943-5533.0000658 ↗
25. Comparison of some pavement design methods from a fatigue point of view: effect of fatigue properties of asphalt materials
26. Investigation of self healing behaviour of asphalt mixes using beam on elastic foundation setup10.1617/s11527-011-9797-7 ↗
27. Application of thixotropy to analyze fatigue and healing characteristics of asphalt binder10.3141/2179-10 ↗
28. Characterization of fatigue and healing in asphalt binders10.1061/(ASCE)MT.1943-5533.0000080 ↗
29. Characterization of microdamage and healing of asphalt concrete mixtures10.1061/(ASCE)0899-1561(2002)14:6(461) ↗
30. Fatigue behaviour of bituminous materials: from binders to mixes10.1080/14680629.2003.9689938 ↗
31. Analysis of fatigue test for bituminous mixtures10.1061/(ASCE)MT.1943-5533.0000636 ↗
32. Three-dimensional analysis of fatigue tests on bituminous mixtures: three-dimensional analysis of fatigue tests on bituminous mixtures10.1111/ffe.12278 ↗
33. Unified failure criterion for asphalt binder under cyclic fatigue loading10.1080/14680629.2015.1077010 ↗