journal article·2018-02

Monitoring early-age setting of silica fume concrete using wave propagation techniques

Nikita Bhalla, Sandeep Sharma, Shruti Sharma, Rafat Siddique

Publisher page

Abstract

Abstract It is imperative to investigate and monitor young and plastic concrete as soon as it is poured into the moulds from both, technical as well as economic considerations. It would facilitate to detect any anomalies in concrete and to undertake any remedial action at an early stage and avoid the hardship of dismantling solidified concrete later. The focus of the study is to investigate the effectiveness of wave propagation based Non-Destructive Techniques (NDT) of Ultrasonic Pulse Velocity (UPV), Ultrasonic Guided Waves (UGW) and Acoustic Emission (AE) to determine their efficacy in analysing the setting behaviour of concrete made with 6–12% replacement of cement by Silica Fume (SF). Test results indicate that a judicious combination of the three NDT techniques utilizing wave propagation characteristics of UPV, discrete UGW and continuous AE monitoring give a good indication of the setting mechanism of normal concrete as well as SF modified concrete. The three techniques applied in-situ in the field gives an early indication of the quality and efficiency of normal as well as SF modified concretes by studying the changes in UPV, transmitted UGW signal strength and AE hits with the setting of concrete. The research effort proposes an in-situ set-up for early age monitoring of green concrete as soon as it is poured into moulds utilizing these wave propagation techniques.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Geophysical Methods and Applications · Rock Mechanics and Modeling · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (76)

Show source-provided references
1. Effect of silica fume fineness on the improvement of Portland cement strength performance10.1016/j.conbuildmat.2015.07.092 ↗
2. Comparative study of effect of raw and densified silica fume in the paste, mortar and concrete10.1016/j.conbuildmat.2015.12.045 ↗
3. Compressive strength and sulfate resistance of limestone and/or silica fume mortars10.1016/j.conbuildmat.2011.06.064 ↗
4. Influence of silica fume on the tensile strength of concrete10.1016/j.cemconres.2004.05.024 ↗
5. Compressive strength of concrete mixtures with binary and ternary cement blends
6. The effect of silica fume and metakaolin on glass-fibre reinforced concrete (GRC) ageing10.3989/mc.2010.52009 ↗
7. Estimation of the permeability of silica fume cement concrete10.1016/j.conbuildmat.2009.08.033 ↗
8. Sulfate resistance of concrete containing mineral admixture
9. The effect of Persian Gulf zone exposure on durability of mixes containing silica fume and blast-furnace slag10.1016/j.conbuildmat.2008.02.009 ↗
10. Strength and wear resistance of sand replaced silica fume concrete
11. Effect of elevated temperature on compressive strength of blended cement mortar
12. Utilization of fly ash with silica fume and properties of Portland cement–fly ash–silica fume concrete10.1016/j.fuel.2009.10.003 ↗
13. Effect of nano-silica on characterization of Portland cement composite10.1016/j.msea.2006.03.010 ↗
14. Microstructural investigation of a silica fume–cement–lime mortar10.1016/S0958-9465(02)00006-9 ↗
15. Utilization of silica fume in concrete: review of hardened properties10.1016/j.resconrec.2011.06.012 ↗
16. Compressive strength, microstructure and thermal analysis of autoclaved and air cured structural lightweight concrete made with coal bottom ash and silica fume10.1016/j.msea.2010.01.089 ↗
17. ASTM C451-13, Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method).
18. CSN EN 196-3, Methods of Testing Cement – Part 3: Determination of Setting Times and Soundness.
19. ASTM C 1437 – 15, Standard Test Method for Flow of Hydraulic Cement Mortar.
20. ASTM C230, Standard Specification for Flow Table for Use in Tests of Hydraulic Cement.
21. Van Brueugel · 1991
22. General hydration model for Portland cement and blast furnace slag cement10.1016/0008-8846(95)00048-H ↗
23. Hydration and temperature development of concrete made with blast-furnace slag cement10.1016/S0008-8846(98)00229-4 ↗
24. Schindler · 2002
25. ASTM C 403 · 1985
26. Sant · 2007
27. Detecting the fluid-to-solid transition in cement pastes
28. Recent advances in the field of cement hydration and microstructure analysis10.1016/j.cemconres.2011.03.028 ↗
29. Determination of concrete setting time using electrical resistivity measurement10.1061/(ASCE)0899-1561(2007)19:5(423) ↗
30. Study on hydration process of early-age concrete using embedded active acoustic and non-contact complex resistivity methods10.1016/j.conbuildmat.2013.04.032 ↗
31. Assessment of hydration process and mechanical properties of cemented paste backfill by electrical resistivity measurement
32. Electromagnetic wave-based measurement techniques to study the role of Portland cement hydration in cemented paste backfill materials10.1080/17480930.2012.639193 ↗
33. A solitary wave-based sensor to monitor the setting of fresh concrete10.3390/s140712568 ↗
34. Monitoring the setting and hardening of cement-based materials with ultrasound
35. Continuous monitoring of setting and hardening of mortar and concrete10.1016/j.conbuildmat.2003.10.002 ↗
36. Ultrasonic in-situ monitoring of setting process of high-performance concrete10.1016/j.cemconres.2003.10.012 ↗
37. Non-destructive evaluation of setting and hardening of cement paste based on ultrasonic propagation characteristics10.3151/jact.3.343 ↗
38. Determination of initial degree of hydration for improvement of early-age properties of concrete using ultrasonic wave propagation10.1016/j.cemconcomp.2006.02.007 ↗
39. Possibilities of using the ultrasonic wave transmission method to estimate initial setting time of cement paste10.1016/j.cemconres.2008.08.003 ↗
40. A new US procedure to determine setting period of cement pastes, mortars and concretes
41. Recent advances of ultrasonic testing of cement based materials at early ages10.1016/j.ultras.2013.07.010 ↗
42. Influence of superplasticizers on the evolution of ultrasonic P-wave velocity through cement pastes at early age10.1016/j.cemconres.2013.04.007 ↗
43. Ultrasound monitoring of the influence of different accelerating admixtures and cement types for shotcrete on setting and hardening behaviour10.1016/j.cemconres.2005.03.011 ↗
44. Muhammad · 2009
45. Monitoring the setting of concrete containing blast-furnace slag by measuring the ultrasonic p-wave velocity10.1016/j.cemconres.2008.04.006 ↗
46. Properties of early-age Portland cement mortar monitored with shear wave reflection method
47. Sun · 2005
48. Voigt · 2005
49. Green and early age compressive strength of extruded cement mortar monitored with compression tests and ultrasonic techniques10.1016/j.cemconres.2005.09.005 ↗
50. Ultrasonic wave reflection and resonant frequency measurements for monitoring early-age concrete10.1061/(ASCE)0899-1561(2009)21:9(476) ↗
51. Measuring the change in ultrasonic p-wave energy transmitted in fresh mortar with additives to monitor the setting10.1016/j.cemconres.2009.06.016 ↗
52. Monitoring setting and early hardening of concrete using an ultrasonic wave guide10.1784/insi.46.6.350.56383 ↗
53. Monitoring the setting and hardening of early age concrete using a pulse echo ultrasonic guided wave approach10.1784/insi.2007.49.4.207 ↗
54. J.L. Borgerson, H. Reis, Surface layer measurements of early age mortar investigated by ultrasonic guided waves and finite element analysis, in: Proceedings of SPIE 6932, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, 2008, 69321E. doi: 10.1117/12.768008.10.1117/12.768008 ↗
55. Longitudinal guided waves for monitoring chloride corrosion in reinforcing bars in concrete10.1177/1475921710365415 ↗
56. Monitoring corrosion in oxide and chloride environments using ultrasonic guided waves10.1061/(ASCE)MT.1943-5533.0000144 ↗
57. A non-destructive evaluation of corrosion in varying environments using guided waves10.1080/09349847.2012.699609 ↗
58. Ultrasonic guided waves for monitoring the setting process of concretes with varying workabilities10.1016/j.conbuildmat.2014.09.018 ↗
59. Monitoring freshly poured concrete using ultrasonic waves guided through reinforcing bars10.1016/j.cemconcomp.2014.09.011 ↗
60. Ghorbanpoor · 1987
61. Xu · 2008
62. Damage assessment of corrosion in prestressed concrete by acoustic emission10.1016/j.conbuildmat.2012.11.071 ↗
63. Crack classification in concrete based on acoustic emission10.1016/j.conbuildmat.2010.05.004 ↗
64. Global monitoring of large concrete structures using acoustic emission and ultrasonic techniques: case study10.1061/(ASCE)1084-0702(2009)14:3(188) ↗
65. Advanced acoustic techniques for health monitoring of concrete structures
66. New applications of acoustic emission technique for real-time monitoring of material processes10.1023/A:1016559220138 ↗
67. An overview on fatigue damage assessment of reinforced concrete structures with the aid of acoustic emission technique10.1016/j.conbuildmat.2016.02.206 ↗
68. Acoustic emission monitoring of calcium aluminate cement setting at the early age10.1023/A:1010942005907 ↗
69. Investigation of the solidification of concrete according to the signals of acoustic emission10.1007/s11003-005-0103-0 ↗
70. Active and passive monitoring of the early hydration process in concrete using linear and nonlinear acoustics10.1016/j.cemconres.2009.01.016 ↗
71. Application of ultrasonic measurements for determination of setting and hardening in cement paste
72. Early-age acoustic emission measurements in hydrating cement paste: evidence for cavitation during solidification due to self-desiccation10.1016/j.cemconres.2009.06.015 ↗
73. Hydration of a silica fume blended low-alkali shotcrete cement
74. Influence of temperature on the hydration products of low pH cements10.1016/j.cemconres.2012.03.009 ↗
75. Influence of silica fume on the microstructure of cement pastes: new insights from 1H NMR relaxometry10.1016/j.cemconres.2015.04.005 ↗
76. Composition of C–S–H in pastes with increasing levels of silica fume addition10.1016/j.cemconres.2015.04.016 ↗