Evaluating the effects of the wet and simple processes for including carbon Nanotube modifier in hot mix asphalt
Source abstract
Abstract
Abstract Main goal of this study is comparing conventional hot mix asphalt (HMA) with carbon nanotube (CNT) modified-HMA and finding optimized carbon nanotubes content, experimentally. First, two different mixing methods were investigated to find the best one to mix CNTs in asphalt binder as homogeneous as possible. Second, morphology of raw CNTs and CNTs dispersed in asphalt binder was investigated by a scanning electron microscope (SEM). Third, some tests including indirect tensile strength (ITS) test, rotational viscosity (RV) test, resilient modulus test and indirect tensile fatigue (ITF) test were conducted to evaluate properties of modified and unmodified asphalt binders and asphalt mixtures. Regarding SEM test results, it was found that wet-mix method led to more homogeneous mixtures. According to RV test results, the viscosity of CNT-modified asphalt binder produced by wet-mix method is less than the maximum range. It was observed that modification with CNTs led to higher stiffness and consequently improved rutting resistance, particularly when 0.5% to 1% CNT is used. CNT-modification also improved resistance of HMA specimens against fatigue phenomenon, particularly, at low temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Polymer Nanocomposites and Properties · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Case study of rutting performance of HMA modified with waste rubber powder
2. Developments of nano materials and technologies on asphalt materials – a review10.1016/j.conbuildmat.2017.03.158 ↗
3. Dynamic modulus prediction of stabilized rubber modified asphalt mixtures
4. Investigation on seasonal variation of thermal-induced strain in flexible pavements based on field and laboratory measurements10.1016/j.ijprt.2016.08.008 ↗
5. A study on the effects of CNT’s on hot mix asphalt marshal-parameters
6. Nanoclay application to asphalt concrete: characterization of polymer and linear nanocompositemodified asphalt binder and mixture10.1016/j.conbuildmat.2015.05.019 ↗
7. The effect of styrene–butadiene– rubber/montmorillonite modification on the characteristics and properties of asphalt10.1016/j.conbuildmat.2009.06.011 ↗
8. Laboratory evaluation of the effect of nanoorganosilane anti-stripping additive on the moisture susceptibility of HMA mixtures under freeze–thaw cycles10.1016/j.conbuildmat.2013.07.030 ↗
9. Characterization of rutting performance of warm additive modified asphalt mixtures10.1016/j.conbuildmat.2011.12.101 ↗
10. Viscoelastic-based approach to evaluate low temperature performance of asphalt binders10.1016/j.conbuildmat.2016.10.073 ↗
11. Composition analysis of crumb rubber during interaction with asphalt and effect on properties of binder10.1080/10298436.2012.721548 ↗
12. Finite element modelling of field compaction of hot mix asphalt. Part II: applications
13. A review of advances of nanotechnology in asphalt mixtures10.1016/j.sbspro.2013.08.144 ↗
14. Long-term ageing influence on rheological characteristics of asphalt binders containing carbon nanoparticles10.1080/10298436.2011.560267 ↗
15. The impact of carbon nanofiber modification on asphalt binder rheology10.1016/j.conbuildmat.2011.12.022 ↗
16. Development of functional carbon nanotubes -asphalt composites
17. Rheological characterization of bituminous binders modified with carbon nanotubes10.1016/j.sbspro.2012.09.905 ↗
18. Study on the graphite and carbon fiber modified asphalt concrete10.1016/j.conbuildmat.2010.11.082 ↗
19. Haracterization of unaged asphalt binder modified with carbon nanoparticles
20. Evaluation of high temperature rheological characteristics of asphalt binders with carbon nano particles10.1520/JTE103133 ↗
21. Carbon nanotubes-modified asphalt binder: preparation and characterization
22. Characterization of CNTs-modified HMA’s mechanical properties10.1016/j.conbuildmat.2015.03.035 ↗
23. AASHTO guide for design of pavement structures, 1993
24. ASTM 4402, Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer.
25. AASHTO T283, Standard method of test for resistance of compacted asphalt mixtures to moisture induced damage, 2003.
26. Use of surface free energy method to evaluate the moisture susceptibility of sulfur extended asphalts modified with antistripping agents10.1016/j.conbuildmat.2015.08.123 ↗
27. ASTM D4123 · 2003
28. Numerical evaluation of pavement design parameters for the fatigue cracking and rutting performance of asphalt pavements10.1617/s11527-015-0744-x ↗
29. Fatigue behavior of SMA and HMA mixtures
30. ASTM D4123, Annual book of ASTM Standards. Road and paving materials, 04.03 2000.
31. AASHTO T316, Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer, 2013.
32. Improving moisture sensitivity and mechanical properties of sulfur extended asphalt mixture by nano-antistripping agent10.1016/j.conbuildmat.2016.12.038 ↗