Impact of the height imperfections of masonry blocks on the load bearing capacity of dry-stack masonry walls
Source abstract
Abstract
Dry-stacked masonry walls gives rise to geometric imperfections: the height variation of different masonry blocks ΔH and the roughness of the support area Δh. This paper studies the effect of ΔH on the structural response and the load bearing capacity of masonry walls by highlighting the load percolation. Furthermore, an algorithm was developed to define a stress multiplier coefficient respecting the imperfections ΔH. The algorithm allowed predicting 77% of the amplified stress compared to the FE analysis and showed that the geometric imperfections govern the load percolation in a wall as well as the cracking mode and the bearing capacity.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Masonry and Concrete Structural Analysis · Building materials and conservation · Hygrothermal properties of building materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. “CEN, Eurocode 6, Design of masonry structures, Part 1, Common rules for reinforced and unreinforced masonry structures”, EN-1996-1-1, 2005.
2. Discrete element modelling of the in-plane and out-of-plane behaviour of dry-joint masonry wall constructions10.1016/j.engstruct.2017.01.020 ↗
3. Mechanics of hollow concrete block masonry prisms under compression: review and prospects10.1016/j.cemconcomp.2006.11.003 ↗
4. Finite element analysis of interlocking mortarless hollow block masonry prism10.1016/j.compstruc.2007.05.022 ↗
5. Nonlinear finite element analysis of grouted and ungrouted hollow interlocking mortarless block masonry system10.1016/j.engstruct.2007.10.014 ↗
6. Strength, behaviour, and failure mode of hollow concrete masonry constructed with mortars of different strengths10.1016/j.conbuildmat.2016.12.112 ↗
7. Behaviour of concrete block masonry prisms under axial compression10.1139/l95-107 ↗
8. Prediction of solid block masonry prism compressive strength using FE model10.1617/s11527-009-9524-9 ↗
9. Numerical prediction of the behaviour, strength and elasticity of masonry in compression10.1016/j.engstruct.2015.02.011 ↗
10. A micro-mechanical model for the homogenisation of masonry10.1016/S0020-7683(02)00230-5 ↗
11. Derivation of the in-plane elastic characteristics of masonry through homogenization theory10.1016/0020-7683(94)00140-R ↗
12. Homogenisation of periodic masonry: plane stress, generalised plane strain or 3D modelling?10.1002/(SICI)1099-0887(199705)13:5<319::AID-CNM55>3.0.CO;2-S ↗
13. A micromechanical model for linear homogenization of unit masonry10.1007/BF02480408 ↗
14. Bakhvalov · 1989
15. Mechanics of masonry in compression: results from a homogenization approach10.1016/j.compstruc.2006.08.054 ↗
16. The prediction of compressive strength of ungrouted hollow concrete block masonry10.1016/j.conbuildmat.2014.01.025 ↗
17. Mechanics of masonry in compression10.1061/(ASCE)0733-9445(1985)111:4(857) ↗
18. An experimental evaluation of prediction models for the mechanical behaviour of unreinforced, lime-mortar masonry under compression10.1016/j.jobe.2015.10.001 ↗
19. Shariar Agaajani, Danièle Waldmann, “Stabilité de système de murs en blocs de béton emboitable sans joints en mortier”, in Regroupement francophone pour la recherche et la formation sur le béton, Lyon, France, 2012
20. Agaajani · 2015
21. K. William, E.D. Warnke, Constitutive model for the triaxial behaviour of concrete, in: Proceedings of international association of bridge and structural engineers (ISMES), Bergamo, Italy, 1975.
22. Behaviour of interlocking mortarless block masonry
23. Experimental research of hollow concrete block masonry stress deformations
24. R. Atkinson, G. Kingsley, A comparison of the behaviour of clay and concrete masonry in compression, USA-JAPAN coordinated program for Masonry Buildings Research, Report N° 1, 1985.