journal article·2018-02

Acoustic emission characteristics of fracture modes in masonry materials

G. Livitsanos, N. Shetty, D. Hündgen, E. Verstrynge, M. Wevers, D. Van Hemelrijck, D.G. Aggelis

Publisher page

Abstract

Abstract Acoustic emission (AE) is a powerful technique for detection and analysis of the elastic waves produced by the failure mechanisms in construction materials such as masonry. In this study, the different fracture mechanisms are studied in relation to the properties of bricks and mortars. The fracture process is being evaluated using the combination of AE and Digital Image Correlations (DIC) techniques. The isolation of the AE signatures of different types of failure mechanisms is done by testing bricks in flexure and brickwork couplets in compression. AE data are analyzed with a simplified AE parameter-based approach aiming to characterize the fracture mode. This is one of the first times where the relation between the shear and the longitudinal strain field is correlated in masonry with AE. This offers new insight in the material's behavior especially in relation to complicated structural geometries where the dominant stress mode is not known a priori.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Rock Mechanics and Modeling · Geophysical Methods and Applications · Ultrasonics and Acoustic Wave Propagation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Monitoring and predicting masonry’s creep failure with the acoustic emission technique10.1016/j.ndteint.2009.03.001 ↗
2. S. Tringali, R. De Benedictis, C. Gavarini, R. La Rosa, “The cathedral of Noto: from the analysis of the collapse to the restoration and reconstruction project,” in: Proceedings of the UNESCO/ICOMOS international millennium congress archi, Paris (France), 2000.
3. Acoustic emission monitoring of Italian historical buildings and the case study of the Athena temple in Syracuse10.1080/00038628.2012.720246 ↗
4. E. Verstrynge, M. Wevers, “Initial Results on Acoustic Emission Detection in Masonry with Optical Fibre Sensors,” in: 30th European Conference on Acoustic Emission Testing & 7th International Conference on Acoustic Emission, no. September, 2012, pp. 12–15.
5. E. Verstrynge, K. De Wilder, B. Urrego, L. Elvira, E. Voet, K. Van Balen, “Advanced techniques for monitoring settlement-induced deformations and crack growth in historical masonry,” in: Proceedings of the 10th International Conference on Structural Analysis of Historical Constructions SAHC2016, 2016, pp. 645–652.10.1201/9781315616995-86 ↗
6. Method based on digital image correlation for damage assessment in masonry structures10.1016/j.engstruct.2014.12.021 ↗
7. Full-field deformation measurement and crack mapping on confined masonry walls using digital image correlation10.1007/s11340-014-9906-y ↗
8. Grosse · 2008
9. NDE techniques for concrete and masonry structures10.1002/pse.146 ↗
10. A joint fatigue–creep deterioration model for masonry with acoustic emission based damage assessment10.1016/j.conbuildmat.2013.02.045 ↗
11. Effects of micro-structure on fatigue crack propagation and acoustic emission behaviors in a micro-alloyed steel10.1016/j.msea.2012.08.138 ↗
12. Classification of cracking mode in concrete by acoustic emission parameters10.1016/j.mechrescom.2011.03.007 ↗
13. Damage evaluation of three masonry towers by acoustic emission10.1016/j.engstruct.2006.08.008 ↗
14. Laboratory and field studies on the use of acoustic emission for masonry bridges10.1016/j.ndteint.2013.01.006 ↗
15. Characterisation of damage in composite structures using acoustic emission10.1088/1742-6596/305/1/012086 ↗
16. The workability of masonry mortar assessed by masons10.1515/rbm-2009-6271 ↗
17. E.N. NBN, “12390-3,” Testing hardened concrete–Part, vol. 3.
18. Experimental set up for the mechanical characterization of plane ITM membrane at high temperature10.1016/j.jeurceramsoc.2015.06.026 ↗
19. Acoustic emission activity for characterizing fracture of marble under bending
20. Measurement of the fracture energy using three-point bend tests: part 1 influence of experimental procedures10.1007/BF02473065 ↗
21. Determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beames
22. Acoustic signature of different fracture modes in marble and cementitious materials under flexural load10.1016/j.mechrescom.2012.11.007 ↗
23. “Recommendation of RILEM TC 212-ACD: acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete*”, Mater. Struct., vol. 43, no. 9, pp. 1177–1181, Nov. 2010.10.1617/s11527-010-9638-0 ↗
24. Detection and evaluation of AE waves due to rock deformation10.1016/S0950-0618(00)00073-8 ↗
25. Y.T.M. Ohtsu, Phenomenological model of corrosion process in reinforced concrete identified by AE, ACI Mater. J., 105 (2) (2007) 194–200 2011.10.14359/19764 ↗
26. T.O. Masayasu Ohtsu, Shigenori Yuyama, “Moment tensor analysis of acoustic emission for cracking mechanisms in concrete,” Struct. J., 95 (2).
27. “Recommendation of RILEM TC 212-ACD: acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete*”, Mater. Struct., vol. 43, no. 9, pp. 1187–1189, Nov. 2010.10.1617/s11527-010-9640-6 ↗
28. Schreier · 2009
29. Observation of the failure mechanism of brick masonry doublets with cement and lime mortars by microfocus X-ray computed tomography
30. Investigation into the failure mechanism of brick masonry loaded in axial compression
31. Bending fracture of textile reinforced cement laminates monitored by acoustic emission: influence of aspect ratio10.1016/j.conbuildmat.2014.07.080 ↗
32. Early damage detection in composites during fabrication and mechanical testing10.3390/ma10070685 ↗