journal article·2018-03

Experimental investigation of moment redistribution in ultra-high performance fibre reinforced concrete beams

P. Visintin, M.S. Mohamad Ali, T. Xie, A.B. Sturm

Publisher page

Abstract

Abstract In the design of statically indeterminate structures the concept of moment redistribution is used to reduce the absolute magnitudes of moments in critical regions, to fully utilise the capacity of non-critical cross sections, and to simplify detailing by enabling a reduction in reinforcement ratios. Due to the complex mechanisms which control the formation and rotation of plastic hinges, moment redistribution capacities are commonly empirically based, and hence not necessarily applicable outside of the bounds of the testing regime from which they were derived. This paper presents the results of an experimental study of the moment redistribution capacity of four two-span continuous beams constructed from ultra-high performance fibre reinforced concrete (UHPFRC) and with various reinforcement ratios, such that the suitability of extending of exiting empirical design approaches to UHPFRC can be investigated. The results of the experimental investigation show that for beams where the hinge formed at the support, the observed moment redistribution was greater than the code predictions. However for the beam where the hinge formed under the load points, observed moment redistribution was significantly less than codes predictions. Hence, the results of this study show current design guidelines do not always provide a conservative prediction of moment redistribution in UHPFRC beams.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Structural Health Monitoring Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. AFGC (Association Francaise de Genie Civil), Betons fibres a ultra-hautes performances – Recommandations [Ultra High Performance Fibre Reinforced-Concretes – Recommendations], Paris, France, 2013.
2. ACI Committee, American Concrete Institute, and International Organization for Standardization · 2008
3. CARDIFRC – development and mechanical properties: Part 1. Development and workability10.1680/macr.2005.57.6.347 ↗
4. G. Chanvillard, S. Rigaud, Complete characterization of tensile properties of Ductal® UHPFRC according to the French recommendations, in: Proceedings of the 4th International RILEM Workshop High Performance Fiber Reinforced Cementitious Composites, 2003, pp. 21–34.
5. Concrete shear-friction material properties: derivation from actively confined compression cylinder tests10.1260/1369-4332.18.8.1173 ↗
6. Ductility and linear analysis with moment redistribution in reinforced high-strength concrete beams10.1139/l04-080 ↗
7. Available plastic rotation in continuous high-strength concrete beams10.1139/L08-064 ↗
8. Flexural behavior of an ultrahigh-performance concrete I-girder10.1061/(ASCE)1084-0702(2008)13:6(602) ↗
9. International Federation for Structural Concrete (fib) · 2010
10. Japanese Society of Civil Engineers · 2008
11. J. Jungwirth, A. Muttoni, Structural behavior of tension members in Ultra High Performance Concrete, in: Proc., International Symposium on Ultra High Performance Concrete, University of Kassel, Kassel, Germany, 2004, pp. 533–546.
12. M.R. Moallem, Flexural Redistribution in Ultra-High Performance Concrete Lab Specimens, (Doctoral dissertation), Ohio University, 2010.
13. A.W. Mohr, Moment Redistribution Behaviour of SFRC Members with Varying Fibre Content (Doctoral dissertation), Stellenbosch University, Stellenbosch, 2012.
14. Moment redistribution in reinforced concrete beams10.1680/stbu.2010.163.3.165 ↗
15. Deformations of reinforced concrete members at yielding and ultimate
16. Moment redistribution in continuous beam of earthquake resistant multistory reinforced concrete frames
17. Moment redistribution effects in beams10.1680/macr.2005.57.1.9 ↗
18. P. Schumacher, Rotation Capacity of Self-Compacting Steel Fiber Reinforced Concrete (Ph.D. Thesis), TU Delft, Delft, Netherlands, 2006.
19. Experimental and numerical study of the flexural behaviour of ultra-high performance fibre reinforced concrete beams10.1016/j.conbuildmat.2017.02.002 ↗
20. Standards Australia · 2009
21. Standards Australia · 2006
22. Standards Australia · 2006
23. Manufacturing ultra-high performance concrete utilising conventional materials and production methods10.1016/j.conbuildmat.2016.02.102 ↗
24. A mechanics solution for hinges in RC beams with multiple cracks10.1016/j.engstruct.2011.11.028 ↗
25. Mechanics-based closed-form solutions for moment redistribution in RC beams10.1002/suco.201500085 ↗
26. Fundamental mechanics that govern the flexural behaviour of reinforced concrete beams with fibre-reinforced concrete
27. Structural behavior of ultra high performance concrete beams subjected to bending10.1016/j.engstruct.2010.07.017 ↗
28. Flexural strength of large-scale ultra high performance concrete prestressed T-beams10.1139/l11-078 ↗