Evaluation of the double coated recycled concrete aggregates for hot mix asphalt
Source abstract
Abstract
Abstract The use of recycled concrete aggregates (RCAs) in pavement industry can mitigate natural aggregates shortage, promote sustainable practices and reduce construction cost. However, the engineering properties of RCAs are usually inferior to those of natural aggregates. In this investigation, a new state of the art coating technique, namely, double coating technique (DCT), is developed to improve strength and durability of the RCAs. The RCAs were firstly coated with a layer of cement slag paste (CSP) to reinforce its weak particles. Then, a second layer of Sika Tite-BE (here called ABE) was applied to reduce its water/bitumen absorption and enhance the durability. Marshall tests, indirect tensile test, indirect tensile ratio test and indirect tensile resilient modulus test were performed to evaluate intermediate AC14 mixtures made with 0%, 20%, 40% and 60% of double coated recycled concrete aggregates (DCRCAs). The results indicated that the DCT decreases the water absorption of the DCRCAs by 12.3% and 26.1% compared to uncoated RCAs and RCAs coated with CSP respectively. Also, the DCT effectively enhances moisture resistance and produces stiffness higher than 4000 MPa proposed for AC14 intermediate mix according to Australian practices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. ASTM · 2017 · 1
2. Australian/New Zealand Standard · 2013 · 1
3. Australian/New Zealand Standards · 2015 · 1
4. Austroads · 2007 · 1
5. Austroads. Testing Asphalt in Accordance with the Austroads Mix Design Procedures (No. AP-T100/08). Retrieved from Sydney, 2008.
6. Evaluation of effects of recycled concrete aggregate on volumetrics of hot-mix asphalt10.3141/2205-05 ↗
7. Evaluating recycled concrete aggregate as hot mix asphalt aggregate10.1520/ACEM20120053 ↗
8. Porous asphalt mixture with 100% recycled concrete aggregate10.1080/14680629.2013.837839 ↗
9. Effects of the use of construction and demolition waste aggregates in cold asphalt mixtures10.1016/j.conbuildmat.2013.10.096 ↗
10. Stiffness of cold asphalt mixtures with recycled aggregates from construction and demolition waste10.1016/j.conbuildmat.2014.12.045 ↗
11. Recycled construction and demolition waste in cold asphalt mixtures: evolutionary properties10.1016/j.jclepro.2015.08.038 ↗
12. Modification of recycled concrete aggregate by calcium carbonate biodeposition10.1016/j.conbuildmat.2012.02.027 ↗
13. Rutting susceptibility of asphalt concrete with recycled concrete aggregate using revised Marshall procedure10.1016/j.conbuildmat.2014.01.043 ↗
14. Laboratory investigations of activated recycled concrete aggregate for asphalt treated base10.1016/j.conbuildmat.2014.04.115 ↗
15. Treatments for the improvement of recycled aggregate10.1061/(ASCE)0899-1561(2004)16:6(597) ↗
16. Evaluation of pre-coated recycled concrete aggregate for hot mix asphalt10.1016/j.conbuildmat.2011.08.025 ↗
17. Influence of coating recycled aggregate surface with pozzolanic powder on properties of recycled aggregate concrete10.1016/j.conbuildmat.2008.07.019 ↗
18. MRWA · 2017
19. Mechanical, durability and microstructure properties of Cold Asphalt Emulsion Mixtures with different types of filler10.1016/j.conbuildmat.2016.03.112 ↗
20. Effects of recycled concrete aggregates on properties of asphalt concrete10.1016/j.resconrec.2005.12.009 ↗
21. Laboratory evaluation of hot-mix asphalt containing construction and demolition waste10.1016/j.conbuildmat.2013.02.052 ↗
22. Mechanical properties of hot-mix asphalt made with recycled concrete aggregates coated with bitumen emulsion10.1016/j.conbuildmat.2014.01.053 ↗
23. M.S. Pourtahmasb, M.R. Karim, Performance Evaluation of Stone Mastic Asphalt and Hot Mix. 2014.10.1155/2014/863148 ↗
24. Performance of hot mix asphalt mixtures made of recycled aggregates10.1520/JTE20130004 ↗
25. Properties of treated recycled aggregates and its influence on concrete strength characteristics10.1016/j.conbuildmat.2016.02.064 ↗
26. Standards Australia · 2005 · 1
27. Comparing the implementation of concrete recycling in the Australian and Japanese construction industries10.1016/j.jclepro.2008.11.015 ↗
28. Microbial carbonate precipitation for the improvement of quality of recycled aggregates10.1016/j.jclepro.2017.04.051 ↗
29. Value-added utilisation of recycled concrete in hot-mix asphalt10.1016/j.wasman.2006.02.001 ↗
30. Investigation of asphalt mixture containing demolition waste obtained from earthquake-damaged buildings10.1016/j.conbuildmat.2011.09.023 ↗
31. Mechanistic performance of asphalt-concrete mixture incorporating coarse recycled concrete aggregate10.1061/(ASCE)MT.1943-5533.0000668 ↗