Different methods of selecting probe liquids to measure the surface free energy of asphalt binders
Source abstract
Abstract
Abstract The present study evaluates two different methods for selection of probe liquids to determine the surface free energy (SFE) of asphalt binders: (i) Condition Number (CN) of probe liquids, and (ii) plot between cosine of total SFE ( ϒ L Cosθ) and total SFE of probe liquids ( ϒ L ) . Five different probe liquids, i.e. Water (W), Formamide (F), Ethylene Glycol (E), Diiodomethane (D), and Glycerol (G) were selected. Overall, ten different combinations of probe liquid triplets (W-G-F, W-G-E, W-G-D, W-F-E, W-F-D, W-D-E, G-F-E, G-F-D, F-E-D, and D-E-G) were formed to examine CN and plot of ϒ L Cosθ versus ϒ L . Three asphalt binders, namely unmodified (VG30), SBS polymer modified binder (PMB40) and crumb rubber modified (CRMB60) binders were selected for the present study. The contact angle of asphalt binders was measured using sessile drop method, and SFE of each of the selected asphalt binders was determined for all ten combinations of probe liquids. Thereafter, CN of probe liquid triplets was determined using Singular Value Decomposition (SVD) method. In addition, ϒ L Cosθ versus ϒ L plot was made for triplets using the measured contact angles of probe liquids. The CN approach and ϒ L Cosθ versus ϒ L plot were compared based on binder’s total SFE to identify a better approach for selecting appropriate probe liquid triplets. CN approach was observed to be superior compared to the plot of ϒ L Cosθ versus ϒ L . In fact, it was observed that the plot approach may not be valid for asphalt binders.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Surface free energy to identify moisture sensitivity of materials for asphalt mixes10.3141/2001-05 ↗
2. M. Arabani, H. Roshani, G.H. Hamedi, M. Sc, Estimating moisture sensitivity of warm mix asphalt modified with zycosoil as an antistrip agent using surface free energy method, 24 (2012) 889–897. doi: 10.1061/(ASCE)MT.1943-5533.0000455.10.1061/(ASCE)MT.1943-5533.0000455 ↗
3. Using the surface free energy method to evaluate the effects of liquid antistrip additives on moisture sensitivity in hot mix asphalt10.1080/10298436.2013.778410 ↗
4. Interfacial lifshitz-van der waals and polar interactions in macroscopic systems10.1021/cr00088a006 ↗
5. Surface energy measurement of asphalt and its application to predicting fatigue and healing in asphalt mixtures
6. Using surface energy measurements to select materials for asphalt pavements
7. Bitumen surface energy characterization using a contact angle approach10.1061/(ASCE)0899-1561(2006)18:6(759) ↗
8. Recent theoretical and experimental advancements in the application of Van Oss–Chaudury–Good acid–base theory to the analysis of polymer surfaces I. General aspects10.1163/156856103769207365 ↗
9. Surface free energy and moisture susceptibility evaluation of asphalt binders modified with surfactant-based chemical additive10.1016/j.jclepro.2015.10.101 ↗
10. D.Y. Kwok, A. Li, A.W. Neumann, Low-rate dynamic contact angles on poly (methyl methacrylate/ethyl methacrylate, 30/70) and the determination of solid surface tensions, 51 (1999) pp. 44–51. https://doi.org/10.1006/jcis.1998.5610.10.1006/jcis.1998.5610 ↗
11. Asphalt-aggregate adhesion work of natural asphalt modified asphalt
12. Kittu, R. Bulut, S. Harimkar, Comparison of contact angle measurements on granite with respect to surface roughness, Int. J. Pavements Conf., Paper 159-1, São Paulo, Brazil, 9-10 December (2013), pp. 1–9.
13. A.R. Azarhoosh, F.M. Nejad, A. Khodaii, Using the surface free energy method to evaluate the effects of nanomaterial on the fatigue life of hot mix asphalt, (2015) pp. 1–9. doi: 10.1061/(ASCE)MT.1943-5533.0001614.10.1061/(ASCE)MT.1943-5533.0001614 ↗
14. Assessment of a sessile drop device and a new testing approach measuring contact angles on aggregates and asphalt binders10.1061/(ASCE)MT.1943-5533.0000852 ↗
15. Comparison of wilhelmy plate and sessile drop methods to rank moisture damage susceptibility of asphalt – aggregates combinations10.1016/j.conbuildmat.2016.03.060 ↗
16. Using surface free energy method to study the cohesion and adhesion of asphalt mastic10.1016/j.conbuildmat.2013.05.067 ↗
17. Investigation of moisture damage resistance of GTR-modified asphalt binder by static contact angle measurements10.1016/j.conbuildmat.2015.07.032 ↗
18. J. Lambert, A. Shalaby, M. Enieb, Wettability, surface tension and surface free energy behavior of short-term aging and liquid antistrips modified HMA binders, Int. J. Pavements Conf., Paper 199-1, São Paulo, Brazil, 9-10 December (2013), pp. 1–12.
19. Evaluating the effect of zycosoil on moisture damage of hot-mix asphalt using the surface energy method10.1061/(ASCE)MT.1943-5533.0000819 ↗
20. Effect of sasobit and aspha-min on wettability and adhesion between asphalt binders and aggregates10.3141/2051-10 ↗
21. Evaluation of rutting, fatigue and moisture damage performance of nanoclay modified asphalt binder10.1016/j.conbuildmat.2016.03.057 ↗
22. Moisture damage resistance of GTR-modified asphalt binders containing WMA additives using the surface free energy approach10.1061/(ASCE)CF.1943-5509.0000995 ↗
23. evaluation of predictive models for estimating dynamic modulus of hot-mix asphalt in Oklahoma10.3141/2210-07 ↗
24. Transportation Research Board, Moisture Sensitivity of Asphalt Pavements, 2003. doi: 10.17226/21957.10.17226/21957 ↗
25. Characterization of aggregate surface energy using the Universal Sorption Device10.1061/(ASCE)0899-1561(2007)19:8(634) ↗
26. Laboratory investigation of moisture susceptibility of warm-mix asphalt mixtures containing steel slag aggregates10.1080/10298436.2014.953502 ↗
27. Use of the combined Lifshitz–van der waals and lewis acid–base approaches in determining the apolar and polar contributions to surface and interfacial tensions and free energies10.1163/156856102760099870 ↗