Determination of optimal mix from the standpoint of short term aging based on asphalt mixture fracture properties using response surface method
Source abstract
Abstract
Abstract Over the years, asphalt pavement materials age, causing binder embrittlement which adversely affects pavement service life. This paper employed Response Surface Method (RSM) to determine the optimal mix from the standpoint of short term aging based on mixtures’ fracture properties obtained from the Semi-Circular Bending (SCB) test. In order to short term age the mixtures, an experimental matrix was designed based on the central composite design. Aging temperature, aging duration and duration in humidity and ultraviolet chamber were considered as short term aging factors or independent variables (IV). The maximum force, deformation at maximum force, strain at maximum force, stiffness, fracture energy, maximum stress at failure, fracture toughness, velocity of fracture initiation, fragility index, and velocity of crack growth as the SCB test outcomes or dependent variables (DV) were analyzed using RSM. The results showed that the effects of IVs on the DVs change with changes in either binder type or binder content. For instance, the maximum fracture energy of mixtures produced with binder A60 were 3197.8 and 2599.1 J/m2 at 10 and 30 °C, respectively, while the corresponding values of mixtures produced with binder B80 were 5112 and 1725.9 J/m2 at 10 and 30 °C, respectively. Aging up to some level exhibited beneficial impacts on mixtures’ fracture properties, which was considered as the optimal mix. The short-term aging level of optimal mix for the mixtures with stiffer binder was lower, compared to those produced with softer binders. For example, aging temperature to achieve optimal mix for mixtures prepared using binder A60 was 124 °C at 20 °C, while the corresponding value for mixtures produced with binder A80 was 142 °C at the same temperature. Crossing the optimal mix, made the mixtures become brittle, which was not desirable especially at lower temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Evaluation of the impact of extended aging duration on visco-elastic properties of asphalt binders10.1016/j.acme.2015.02.006 ↗
2. Glover · 2007
3. Glover · 2005
4. Short-term aging characterization of asphalt binders using gel permeation chromatography and selected Superpave binder tests10.1016/j.conbuildmat.2007.08.005 ↗
5. Studies on the aging behavior of the Arabian asphalts10.1016/S0016-2361(99)00018-6 ↗
6. Rheological properties and chemical analysis of nanoclay and carbon microfiber modified asphalt with Fourier transform infrared spectroscopy10.1016/j.conbuildmat.2012.08.004 ↗
7. Use of X-ray diffraction in assessing the aging pattern of asphalt fractions10.1016/S0016-2361(01)00116-8 ↗
8. Gandhi · 2008
9. Evaluation of low-temperature properties of long-term-aged asphalt mixtures
10. Field aging effects on fatigue of asphalt concrete and asphalt-rubber concrete10.3141/1767-16 ↗
11. Fatigue characteristics of superpave and hveem mixtures10.1061/(ASCE)0733-947X(2005)131:4(302) ↗
12. Field aging of unmodified asphalt binder in three Texas long-term performance pavements10.3141/2051-03 ↗
13. Pavement deficiencies related to asphalt durability
14. A review of asphalt and asphalt mixture aging: una revisión
15. Fracture properties of asphalt mixtures using semi-circular bending test: a state of-the-art review and future research10.1016/j.conbuildmat.2015.12.046 ↗
16. Evaluating the semi-circular bending test for HMA mixtures
17. Characterization of asphalt mixture’s fracture resistance using the semi-circular bending (SCB) test
18. Bradley · 2007
19. Mason · 2003
20. Performance optimization method of composite modified asphalt sealant10.1061/JHTRCQ.0000306 ↗
21. Moisture susceptibility of warm mix asphalt: a statistical analysis of the laboratory testing results10.1016/j.conbuildmat.2013.10.073 ↗
22. A mathematical model for predicting stripping potential of Hot Mix Asphalt10.1016/j.conbuildmat.2014.11.041 ↗
23. Effects of extended short-term aging duration on asphalt binder behaviour at high temperatures10.3846/bjrbe.2016.35 ↗
24. Use of imaging technique and direct tensile test to evaluate moisture damage properties of warm mix asphalt using response surface method10.1016/j.conbuildmat.2016.11.092 ↗
25. Malaysian Public Works Department (PWD). Standard specification for road works, section 4, flexible pavement, Jabatan, Kerja Raya Malaysia, Kuala Lumpur, 2008.
26. BS EN 12697-44:2010, Bituminous mixtures. Test methods for hot mix asphalt. Crack propagation by semi-circular bending test, 2010.
27. AASHTO TP105-13, Standard Method of Test for Determining the Fracture Energy of Asphalt Mixtures Using the Semicircular Bend Geometry (SCB), American Association of State and Highway Transportation Officials, 2013.
28. Omranian · 2017
29. Omranian · 2017
30. A review on the effects of aging on properties of asphalt binders and mixtures
31. Sebaaly · 2006
32. Effect of Portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsion10.1016/j.conbuildmat.2008.07.020 ↗