journal article·2019-02

Investigation of crack dynamic parameters and crack arresting technique in concrete under impacts

Lin Lang, Zheming Zhu, Xianshang Zhang, Hao Qiu, Changlin zhou

Publisher page

Abstract

Abstract Concrete structures usually contain cracks or microcracks. Under dynamic loading, such as impacts, blasts and earthquakes, these cracks may initiate and propagate, weakening concrete strength and structure’s stability. It is thus necessary to carry out the research on the crack dynamic fracture behavior and to develop crack arresting technique for cracked concrete structures under dynamic loads. In this study, impact tests were performed using a drop-weight impact device. A single crack emanating from a semicircle and a V-shaped bottom (SCESVB) specimen was proposed. The V-shaped bottom has the function of arrest on the propagation of the pre-crack. Crack propagation gauges (CPGs) were used to measure crack propagation parameters. Three angles 120°, 150° and 180° were designed for the V-shaped bottom of the SCESVB specimens. The crack propagation behavior was simulated by the finite difference code AUTODYN, and the dynamic stress intensity factor (DSIF) was calculated by the finite element code ABAQUS. The critical DSIF was determined by the crack initiation time and the propagation time measured by the CPG. The experimental and numerical simulation results show that the SCESVB specimen is suited to studying crack propagation behavior and crack arresting behavior for concrete under dynamic loads. During the crack propagation process, the crack may arrest in a short time, and the critical DSIF at initiation is higher than that at propagation for the concrete.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Response to Dynamic Loads · High-Velocity Impact and Material Behavior · Transportation Safety and Impact Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. The phenomena of rupture and flow in solids10.1098/rsta.1921.0006 ↗
2. Crack propagation and the fracture of concrete
3. C.E. Kesler, D.J. Naus, L.L. Lott, Fracture mechanics - its applicability to concrete, in: Proceedings of the international conference on the mechanical behavior of materials, Kyoto, 1971, vol. 4. The Society of Material Science; 1972 113–124.
4. Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements10.1016/0008-8846(76)90007-7 ↗
5. Crack band theory for fracture concrete
6. Determination of fracture energy, process zone length, and brittleness number from size effect with application to rock and concrete10.1007/BF00047063 ↗
7. Determination of the specimen size independent fracture toughness of plain concrete10.1680/macr.1986.38.135.67 ↗
8. Two-parameter fracture model for concrete10.1061/(ASCE)0733-9399(1985)111:10(1227) ↗
9. Determination of double-K criterion for crack propagation in quasi-brittle materials, part I: experimental investigation of crack propagation10.1023/A:1018668929989 ↗
10. Experimental determination of fracture parameters for crack propagation in hardening cement paste and mortar10.1007/s10704-009-9315-x ↗
11. Determining double-K fracture parameters of concrete for compact tension and wedge splitting tests using weight function10.1016/j.engfracmech.2008.12.018 ↗
12. Estimation of real fracture parameters of a dam concrete with large size aggregates through wedge splitting tests of drilled cylindrical specimens10.1016/j.engfracmech.2016.06.012 ↗
13. Determination of double-K fracture parameters using semi-circular bend test specimens10.1016/j.engfracmech.2015.12.006 ↗
14. Numerical simulation of fracture of concrete at different loading rates by using the cohesive crack model10.1016/j.tafmec.2018.05.003 ↗
15. Dynamic Brazilian test of concrete using split Hopkinson pressure bar10.1617/s11527-016-0885-6 ↗
16. Fracture studies of ultra-high performance concrete using dynamic Brazilian tests10.1016/j.tafmec.2017.10.001 ↗
17. A new material model for concrete subjected to intense dynamic loadings10.1016/j.ijimpeng.2018.05.006 ↗
18. Experimental and numerical investigation on the dynamic increase factor of tensile strength in concrete10.1016/j.ijimpeng.2017.12.006 ↗
19. Dynamic response of expanded polystyrene concrete during low speed impact10.1016/j.conbuildmat.2016.06.059 ↗
20. Assessing the impact strength of steel fibre-reinforced concrete under quasi-static and high velocity dynamic impacts10.1016/j.conbuildmat.2015.12.161 ↗
21. Experimental study on dynamic split tensile properties of rubber concrete10.1016/j.conbuildmat.2018.01.073 ↗
22. Crack propagation in an elastic solid subjected to general loading – I. Constant rate of extension10.1016/0022-5096(72)90006-3 ↗
23. On the initial motion of a Griffith crack10.1007/BF00034622 ↗
24. Numerical investigation of blasting-induced crack initiation and propagation in rocks10.1016/j.ijrmms.2006.09.002 ↗
25. Numerical Investigation of Blasting-induced damage in Cylindrical Rocks10.1016/j.ijrmms.2007.04.012 ↗
26. Study on the mechanism of zonal disintegration around an excavation10.1016/j.ijrmms.2013.12.017 ↗
27. Determination of mechanical properties and full-field strain measurements of rock material under dynamic loads10.1016/j.ijrmms.2013.01.005 ↗
28. Dynamic fracture of graphite/epoxy composites stiffened by buffer strips: an experimental study10.1016/j.compstruct.2012.05.032 ↗
29. High-speed digital imaging and computational modeling of dynamic failure in composite structures subjected to underwater impulsive loads10.1016/j.ijimpeng.2014.11.008 ↗
30. Hopkinson bar loaded fracture experimental technique: a critical review of dynamic fracture toughness tests10.1115/1.3124647 ↗
31. Measurement of mode I and mode II rock dynamic fracture toughness with cracked straight through flattened Brazilian disc impacted by split Hopkinson pressure bar10.1016/j.engfracmech.2011.06.004 ↗
32. Study of mixed-mode I/II fractures using single cleavage semicircle specimens under impacting loads10.1016/j.engfracmech.2017.03.042 ↗
33. Splitting tension tests to determine concrete fracture parameters by peak-load method10.1016/S1065-7355(97)90011-0 ↗
34. Determination of fracture toughness KIC by using the flattened Brazilian disc specimen for rocks10.1016/S0013-7944(99)00065-X ↗
35. Rock fracture toughness study using cracked chevron notched Brazilian disc specimen under pure modes I and II loading – a statistical approach10.1016/j.tafmec.2013.11.008 ↗
36. Analysis of cracked and un-cracked semicircular rings under symmetric loading10.1016/j.engfracmech.2014.07.004 ↗
37. suggested methods for determining the fracture toughness of rock10.1016/0148-9062(88)91871-2 ↗
38. New specimen for fracture toughness determination of rock and other materials10.1007/BF01157555 ↗
39. An experimental investigation into dynamic fracture: I. Crack initiation and arrest10.1007/BF00963460 ↗
40. New experimental and numerical techniques to study the arrest and the restart of a crack under impact in transparent materials10.1016/j.ijsolstr.2009.06.003 ↗
41. A new method for determing dynamic fracture toughness of rock using SCDC specimens
42. Experimental and numerical studies of the mixed-mode I and II crack propagation under dynamic loading using SPHB
43. Study of rock dynamic fracture toughness by using VB-SCSC specimens under medium-low speed impacts10.1016/j.engfracmech.2017.06.024 ↗
44. Velocity effects in fracture
45. Analysis of early stage specimen stress equilibrium in SHPB experiment
46. Some questions need to discuss in the SHPB experiments
47. Chen · 2015
48. Freund · 1990
49. Ravi · 2004 · 49
50. Micromechanics based constitutive model for brittle failure at high strain rates10.1115/1.4005897 ↗
51. Study of mode I crack dynamic propagation behaviour and rock dynamic fracture toughness by using SCT specimens10.1111/ffe.12823 ↗
52. Suggested methods for determining the dynamic strength parameters and mode-I fracture toughness of rock materials10.1016/j.ijrmms.2011.10.004 ↗
53. Effect of loading rate on fracture toughness and failure micro mechanisms in marble10.1016/j.engfracmech.2013.02.009 ↗
54. Determination of dynamic fracture parameters using a semi-circular bend technique in split Hopkinson pressure bar testing10.1016/j.engfracmech.2009.02.001 ↗
55. Stress uniformity of split Hopkinson pressure bar under half-sine wave loads10.1016/j.ijrmms.2010.09.006 ↗