journal article·2019-03

Bending properties of bamboo scrimber with holes in different sizes and positions

Jian-bo Zhao, Zhao-xin Meng, Zheng Jin, Dong Chen, Yu-sheng Wu, Wei Zhang

Publisher page

Abstract

Abstract To the requirements of introducing holes for the structural applications of bamboo scrimber, the bending properties of bamboo scrimber, which used Moso bamboo as the raw material, with holes in different sizes at different positions were studied and compared. The results indicated that drilling holes cause the decrease of the bending properties and the larger size for drilling holes causes the lower bending properties. The positions for drilling holes cause the change of the stress distribution and then decrease the bending properties. According to the comparisons of different bamboo tested samples, two basic failure modes were proposed, one is the split along the direction of bamboo fibers around the holes caused by shear stress, and the other is the fracture at the bottom of the tested samples by bending stress.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bamboo properties and applications · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Lightweight bamboo double layer grid system10.1016/j.engstruct.2006.09.003 ↗
2. Intelligent functionally graded material – bamboo10.1016/0961-9526(95)00037-N ↗
3. Preparation, physical, mechanical, and interfacial morphological properties of engineered bamboo scrimber10.1016/j.conbuildmat.2017.09.185 ↗
4. Bamboo fibre reinforced biocomposites: a review10.1016/j.matdes.2012.06.015 ↗
5. Bamboo fiber and its reinforced composites: structure and properties10.1007/s10570-012-9741-1 ↗
6. Current status and future development of bamboo scrimber industry in China
7. Fabrication, material properties, and application of bamboo scrimber10.1007/s00226-014-0683-7 ↗
8. Strength models of bamboo scrimber for compressive properties10.1007/s10086-014-1444-9 ↗
9. Engineered bamboo scrimber: Influence of density on the mechanical and water absorption properties10.1016/j.conbuildmat.2016.10.069 ↗
10. Experimental study on compressive and tensile properties of a bamboo scrimber at elevated temperatures10.1016/j.conbuildmat.2017.06.128 ↗
11. Production and mechanical performance of scrimber composite manufactured from poplar wood for structural applications10.1007/s10086-016-1568-1 ↗
12. Engineered bamboo for structural applications10.1016/j.conbuildmat.2015.01.077 ↗
13. Mechanical properties of oriented bamboo scrimber boards made of phyllostachys pubescens (moso bamboo) from taiwan and china as a function of density10.1515/hf-2017-0084 ↗
14. Flexural performance of bamboo scrimber beams strengthened with fiber-reinforced polymer10.1016/j.conbuildmat.2017.03.054 ↗
15. Q.F. Xu, Y.B. Leng, X. Chen, K.A. Harries, L.Z. Chen, Z.L. Wang, Experimental study on flexural performance of glued-laminated-timber- bamboo beams, Mater. Struct. 51 (1).https://doi.org/10.1617/s11527-017-1135-2.URL ://WOS:000426389600010.
16. Bending properties evaluation of newly designed reinforced bamboo scrimber composite beams10.1016/j.conbuildmat.2017.03.052 ↗
17. Effects of heat treatment on the properties of bamboo scrimber10.1007/s10086-016-1574-3 ↗
18. Development of bamboo-based polymer composites and their mechanical properties10.1016/j.compositesa.2003.09.017 ↗
19. An analytical model for design of reinforcement around holes in laminated veneer lumber (lvl) beams10.1617/s11527-013-0019-3 ↗
20. Chinese National Standard GB/T 1928-2009, General requirements for physical and mechanical tests of wood, Standardization Administration of China, Beijing, 2009.
21. Chinese National Standard GB/T 28993-2012 · 2012
22. Chinese National Standard GB/T 50329-2012, Standard for test methods of timber structures, Standardization Administration of China, Beijing, 2012.
23. Chinese National Standard GB/T 1936.1-2009, Method of testing in bending strength of wood, Standardization Administration of China, Beijing, 2009.
24. Chinese National Standard GB/T 17657-2013, Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels, Standardization Administration of China, Beijing, 2013.
25. Research on the flexural performance of bamboo scrimber
26. Analytical cracking load estimation of laminated veneer lumber (lvl) beams with holes10.1007/s00107-012-0646-3 ↗