journal article·2021-09Open access

Flexible Inserts for Injection Molding of Complex Micro‐Structured Polymer Components

Alex Hamilton, Jack Perris, Neil Convery, Daniel M. Mulvihill, Nikolaj Gadegaard

Abstract

Abstract Mass production of microfluidic devices commonly relies on injection molding. Injection molding requires a master surface made using micro or nanofabrication. Conventionally, electroplating from a silicon master is used for mold insert production, but this is expensive and cannot be used with masters produced via the Bosch process as interlocking of the scalloping between polymer and metal insert hinders part ejection. Here, an alternative to the electroplating process is developed by adapting a nanoimprint route to produce flexible micro‐structured polymer inserts capable of molding using a Bosch process‐produced master. An optimized fabrication approach using silicon masters with smooth sidewalls (produced using the mixed process) is used to characterize the limits of the process. Aspect ratios of 1 and below are successfully replicated. Feature spacings down to 20 µm are successfully produced with minimal variation between repeated parts. Masters produced using two different Bosch etches exhibiting both coarse and fine nanometer scalloping are also studied. Parts are successfully ejected with retained nanometer scalloping in all samples although inlay damage occurred after >10 replicas. A proof‐of‐concept microfluidic device is successfully produced vindicating the use of this approach as an efficient and cost‐effective approach for the rapid prototyping of complex micro‐structured designs.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Injection Molding Process and Properties · Nanofabrication and Lithography Techniques · Microfluidic and Capillary Electrophoresis Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

James Watt School of Engineering University of Glasgow Glasgow G12 8QQ UK

Funding

European Research Council · Engineering and Physical Sciences Research Council · Leverhulme Trust

References (40)

Show source-provided references
1. 10.1016/j.mne.2019.01.00310.1016/j.mne.2019.01.003 ↗
2. 10.1002/(SICI)1522-2683(20000101)21:1<27::AID-ELPS27>3.0.CO;2-C10.1002/(SICI)1522-2683(20000101)21:1<27::AID-ELPS27>3.0.CO;2-C ↗
3. Kim P. · BioChip J. · 2008 · 2 · 1
4. 10.1016/j.jbiomech.2015.11.03110.1016/j.jbiomech.2015.11.031 ↗
5. 10.1117/1.360743010.1117/1.3607430 ↗
6. 10.1039/C7LC00644F10.1039/C7LC00644F ↗
7. 10.1002/mame.20029003710.1002/mame.200290037 ↗
8. 10.1016/S0167-9317(98)00048-310.1016/S0167-9317(98)00048-3 ↗
9. Yoon S.‐H. · 2005 · 107
10. J.Zhao R.Ong G.Chen inProc. of the 6th Int. Conf. on Nanochannels Microchannels and Minichannels Parts A and B.2008 pp.1187–1194.
11. Yoon S. ‐ H. · Micro Nanosyst. · 2009 · 545
12. 10.1088/0960-1317/20/1/01502010.1088/0960-1317/20/1/015020 ↗
13. 10.3144/expresspolymlett.2011.9310.3144/expresspolymlett.2011.93 ↗
14. 10.1016/S1369-7021(12)70092-510.1016/S1369-7021(12)70092-5 ↗
15. 10.1002/mame.20110039710.1002/mame.201100397 ↗
16. L.Weber W.Ehrfeld H.Freimuth M.Lacher H.Lehr B.Pech inProc. of SPIE–The Int. Soc. for Optical Engineering Austin October1996.
17. The Micro Injection Molding Process for Polymeric Components Manufacturing, New Technologies—Trends
18. Greener J. · 2006
19. 10.1088/0960-1317/17/8/01410.1088/0960-1317/17/8/014 ↗
20. 10.1002/pen.1105510.1002/pen.11055 ↗
21. 10.1016/S0167-9317(00)00289-610.1016/S0167-9317(00)00289-6 ↗
22. 10.1002/pen.76034150710.1002/pen.760341507 ↗
23. 10.1016/j.matdes.2016.01.11510.1016/j.matdes.2016.01.115 ↗
24. 10.1007/s00170-004-2455-210.1007/s00170-004-2455-2 ↗
25. 10.1007/s00170-014-6010-510.1007/s00170-014-6010-5 ↗
26. 10.1016/j.jmapro.2017.02.01410.1016/j.jmapro.2017.02.014 ↗
27. 10.1115/1.402698310.1115/1.4026983 ↗
28. 10.1007/s00170-012-4577-210.1007/s00170-012-4577-2 ↗
29. 10.1007/s00170-015-6991-810.1007/s00170-015-6991-8 ↗
30. 10.1007/s00170-009-2038-310.1007/s00170-009-2038-3 ↗
31. 10.1088/0960-1317/13/1/31410.1088/0960-1317/13/1/314 ↗
32. 10.1088/0960-1317/14/3/01510.1088/0960-1317/14/3/015 ↗
33. 10.1088/0960-1317/24/7/07501910.1088/0960-1317/24/7/075019 ↗
34. 10.1016/j.cirp.2011.05.00810.1016/j.cirp.2011.05.008 ↗
35. Zhang N. · J. Micromech. Microeng. · 2015 · 25 · 9
36. 10.1088/0960-1317/17/6/R0210.1088/0960-1317/17/6/R02 ↗
37. 10.1016/j.jmatprotec.2015.12.01110.1016/j.jmatprotec.2015.12.011 ↗
38. 10.1007/s00542-006-0184-110.1007/s00542-006-0184-1 ↗
39. Laermer F. · 2015 · 444
40. 10.1039/b410743h10.1039/b410743h ↗