journal article·2019-05

Asphalt mixture workability and effects of long-term conditioning methods on moisture damage susceptibility and performance of warm mix asphalt

Sek Yee Teh, Meor Othman Hamzah

Publisher page

Abstract

Abstract The destructive effects of moisture remain to be the main distress adversely influencing pavement performance. Warm mix asphalt (WMA) compacted at lower temperatures than Hot Mix Asphalt (HMA) is more vulnerable to moisture infiltration and subsequent stripping at the asphalt-aggregate interface. To evaluate the potential mechanisms, the failure severity was computed in indirect tension. Two binder types and various compaction temperatures were used for sample fabrications. The gyratory compaction data were used to quantify the mixtures Workability Index (WI) and Compaction Energy Index (CEI). Six long-term conditioning methods were used namely, Long-Term Aged (LTA), Long-Term Aged + 1 Freeze-Thaw (F-T), LTA + 3 F-T, LTA + 1 F-T (Accelerated Laboratory Vacuum Saturation (ALVS)), simultaneous LTA + Moisture-Induced Damage and simultaneous LTA + Water Damage. The ALVS was used to subject asphalt mixtures to the combined effects of pore pressure and high temperature. As aging and moisture damage occur concurrently during the pavement service life, a new moisture conditioning chamber was fabricated to simulate the simultaneous effects of LTA and moisture/water damage. The effects of conditioning on the indirect tensile strength (ITS), fracture energy, resilient modulus and percentage adhesive failure were investigated. The percentage adhesive failure and broken aggregates were quantified using the advanced 3-D imaging technique. WMA compacted at lower temperatures exhibited improved workability in terms of lower CEI and higher WI than HMA. The mixtures percentage adhesive failure increased, while ITS reduced with F-T cycles. Asphalt mixtures subjected to simultaneous LTA and water damage exhibited the highest percentage adhesive failure and lowest ITS compared to other conditioning methods. ALVS conditioned specimens showed slightly higher percentage adhesive failure than LTA + 1 F-T specimens. The test results also demonstrated that polymer modified binder mixtures exhibited superior moisture resistance than unmodified binder mixtures, regardless of compaction temperature and conditioning level.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Environmental Protection Agency (2000). Hot Mix Asphalt Plants – Emissions Assessment Report, Emissions Monitoring and Analysis Division, Office of Air Quality Planning and Standards, United States Environmental Protection Agency, Research Triangle Park, NC, December 2000.
2. Warm Mix Asphalt – A State of the Art Review, Advisory Note #17, Australian Asphalt Pavement Association, 2001 Available at website http://aapa.asn.au/content/aapa/download/advisorynote17.pdf, Accessed on January, 2014.
3. Quantification of moisture sensitivity of warm mix asphalt using image analysis technique10.1016/j.jclepro.2013.12.072 ↗
4. Determining intrinsic healing properties of asphalt binders: role of dynamic shear rheometer10.3141/2126-06 ↗
5. Evaluation of warm mix asphalt mixtures containing reclaimed asphalt pavement through mechanical performance tests and an acoustic emission approach10.1061/(ASCE)MT.1943-5533.0000757 ↗
6. A. F. Buss, M. H. Rashwan, and R. C. Williams, (2011). Investigation of Warm-Mix Asphalt Using Iowa Aggregates. In Trans Project 10-345. Iowa Department of Transportation.
7. MeadWestVaco (2012) Evotherm® Warm Mix Asphalt. Accessed on January, 2014, from MeadWestVaco: http://www.meadwestvaco.com/SpecialtyChemicals/AsphaltAdditives/ MWV002106
8. ASTM · 2006
9. PWD · 2008
10. Evaluation of compactability and mechanical properties of bituminous mixes with warm additives10.1016/j.conbuildmat.2010.11.024 ↗
11. Assessment of the workability of bituminous mixtures
12. Laboratory evaluation of the workability and compactability of asphaltic materials prior to road construction10.1061/(ASCE)MT.1943-5533.0000551 ↗
13. ASTM · 2006
14. Hicks · 2003
15. AASHTO (2008). AASHTO R30: Standard Practice for Mixture Conditioning of Hot Mix Asphalt.
16. Improved resistance of long-term aged warm-mix asphalt to moisture damage containing moist aggregates10.1061/(ASCE)MT.1943-5533.0000567 ↗
17. ASTM · 2011