journal article·2019-05

Flexural performance of cross-laminated timber constructed from fibre-managed plantation eucalyptus

Halimeh Pangh, Hamid Zarea Hosseinabadi, Nathan Kotlarewski, Payam Moradpour, Michael Lee, Gregory Nolan

Publisher page

Abstract

This study was performed to evaluate the flexural performance of three-ply cross-laminated timber (CLT) floor panels made of unthinned and unpruned plantation Eucalyptus. The impact of the stress-grade of the timber boards on the modulus of elasticity (MOE) and modulus of rupture (MOR) of the panels was determined. The results indicated that the actual MOE of the timber boards from both species could not be appropriately estimated by visual stress-grading. The results revealed that the average MOE and MOR of the panels were significantly affected by the stress-grade of the boards in the top and bottom layers of the panels. The CLT panels made with high-grade boards showed respectively 24% and 21% higher MOE values than comparable panels made with low-grade boards for E. nitens and E. globulus. The failure modes were bending failure on the tensile side and rolling shear for the panels made of low-grade and high-grade boards, respectively. On average, the CLT panels made of E. globulus showed 17.7% higher MOE and 32.5% higher MOR values than comparable panels made of E. nitens.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Wood Treatment and Properties · Bamboo properties and applications · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. AS 1720.1 (2010) Timber Structures – Design Methods. Standards Australia, Australia.
2. AS 2082 (2007). Timber – Hardwood – Visually stress graded for structural purposes. Standards Australia, Australia.
3. AS 4063.1 (2010). Characterisation of structural timber, Part 1: Test Methods. Standards Australia, Australia.
4. Tall timber buildings: what’s next in fire safety?10.1007/s10694-015-0497-7 ↗
5. A comparative life cycle assessment approach of two innovative long span timber floors with its reinforced concrete equivalent in an Australian context
6. Production and Technology of Cross Laminated Timber (CLT): A state-of-the-art Report
7. Innovative structural CLT system in projecting and building of student houses
8. Visual stress grading of fibre-managed plantation Eucalypt timber for structural building applications10.1016/j.conbuildmat.2018.02.090 ↗
9. What to do with structurally low-grade wood from Australia’s plantation eucalyptus; building application?
10. Influence of orientation and number of layers on the elastic response and failure modes on CLT floors: modeling and parameter studies10.1007/s00107-016-1038-x ↗
11. Planar shear properties of hardwood cross layer in hybrid cross laminated timber
12. Block shear strength and delamination of cross-laminated timber fabricated with Japanese larch10.15376/biores.11.4.10240-10250 ↗
13. R. Haba, A. Kitamori, T. Mori, H. Isoda, (2015). < Recent research activities> Development of CLT panels bond-in method for seismic retrofitting of RC frame structure.
14. M. Jelec, V. Rajcic, H. Danielsson, E. Serrano, (2016). Structural analysis of in-plane loaded CLT beams with holes: FE-analyses and parameter studies, in: Proceedings of 3rd INTER Meeting, Graz.
15. Feasibility of manufacturing cross-laminated timber using fast-grown small diameter eucalyptus lumbers10.1016/j.conbuildmat.2016.12.027 ↗
16. Cross-laminated timber made of Hungarian raw materials
17. Effect of manufacturing parameters on mechanical properties of southern yellow pine cross laminated timbers10.1016/j.conbuildmat.2017.08.122 ↗
18. Potential of CLT produced from non-structural grade Australian Pinus Radiata
19. Thilén · 2017
20. Comparison of Cross-and Stress-Laminated Timber Bridge Decks
21. Very tall wooden buildings with cross laminated timber10.1016/j.proeng.2011.07.204 ↗
22. Improving strength grading of timber by grain angle measurement and mechanical modeling10.1080/17480272.2014.951071 ↗
23. Mechanical properties of laminated strand lumber and hybrid cross-laminated timber10.1016/j.conbuildmat.2015.10.035 ↗
24. Managing the health of plantation eucalypts in Tasmania
25. P. Wilson, and S. Taylor, 2013. The use of cross-laminated timber in high density affordable housing and the potential to manufacture this engineered timber product in the Dumfries and Galloway region.