Central crack tearing test and fracture parameter determination of PTFE coated fabric
Source abstract
Abstract
Abstract Catastrophic failure caused by crack propagation is the most common failure mode of tensile fabric structure, the tearing resistance of the coated fabric is the key issue of structural design. This study concerns the residual strength and fracture resistance of PTFE coated fabric. Central crack tearing (CCT) tests are conducted, experimental results shown that the existence of initial crack significantly reduces the residual strength. Furthermore, fracture parameters which can be treated as material constants are obtained to estimate the tearing resistance. The available theoretical solutions, based on the classical linear elastic fracture mechanics (LEFM) theory, are adopted to calculate the fracture parameters. Results indicated that these theoretical solutions cannot estimate the fracture parameters properly due to the nonlinear stiffness of the coated fabric. Therefore, the numerical method virtual crack closure technique (VCCT) is introduced to the fracture parameters determination of PTFE coated fabric. Combined with the nonlinear material constitutive model, critical energy release rate GIC obtained from VCCT effectively reducing its dependence on crack length and thus can be treated as material tearing resistance. Finally, the influence of boundary condition and shear modulus are discussed. Results shown that uniform displacement boundary condition should be used in VCCT. When the shear modulus decreases, the GIC increases gradually and the dependence on the crack length is reduced due to the decrease of stress concentration zone.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Textile materials and evaluations · Structural Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Forster · 2004
2. Experimental investigation and theoretical analysis of tear propagation of GQ-6 airship envelope10.1177/1528083716685906 ↗
3. The measurement of tearing strength of textile fabrics10.1177/004051755602600301 ↗
4. Analysis of tear strength10.1177/004051754701700704 ↗
5. Analytical modeling on mechanical responses and damage morphology of flexible woven composites under trapezoid tearing10.1177/0040517512468824 ↗
6. Comparisons of trapezoid tearing behaviors of uncoated and coated woven fabrics from experimental and finite element analysis10.1177/1056789512450524 ↗
7. Tear propagation of a high-performance airship envelope material10.2514/1.32264 ↗
8. The onset of tearing at slits in stressed coated plain weave fabrics10.1115/1.1794165 ↗
9. The onset of tear propagation at slits in stressed uncoated plain weave fabrics10.1115/1.2791799 ↗
10. Tearing analysis for textile reinforced soft composites under mono-axial and bi-axial tensile stresses10.1016/S0263-8223(03)00099-0 ↗
11. Mechanical responses and damage morphology of laminated fabrics with a central slit under uniaxial tension: a comparison between analytical and experimental results10.1016/j.conbuildmat.2015.10.134 ↗
12. Central crack tearing testing of laminated fabric Uretek3216LV under uniaxial and biaxial static tensile loads10.1061/(ASCE)MT.1943-5533.0001537 ↗
13. Fracture behavior of a nonlinear woven fabric material10.1177/002199837500900405 ↗
14. Tear resistance of woven textiles-Criterion and mechanisms10.1016/j.compositesb.2011.06.015 ↗
15. Tear strength characteristics of laminated envelope composites based on single edge notched film experiment10.1016/j.engfracmech.2014.04.026 ↗
16. Tear resistance of orthogonal Kevlar-PWF-reinforced TPU film10.1016/S1000-9361(11)60014-9 ↗
17. Tearing behaviors of flexible fiber-reinforced composites for the stratospheric airship envelope10.1007/s10443-016-9539-7 ↗
18. Finite element modeling of woven fabric tearing damage10.1177/0040517510397578 ↗
19. Stochastic modelling of tear behavior of coated fabrics10.1088/0965-0393/12/2/010 ↗
20. Mechanistic role of yarn and fabric structure in determining tear resistance of woven cloth: part II: modeling tongue tear10.1177/004051759406400603 ↗
21. Mechanics and mechanisms of tear resistance of woven fabrics10.1016/j.tafmec.2012.08.004 ↗
22. CECS 158: 2015 · 2015
23. MSAJ/M-02:1995 · 1995
24. JIS L1096-2010 2010, Testing methods for woven and knitted fabrics.
25. ASTM D4851-07 · 2015
26. FAA-P-8110-2-1995 · 1995
27. Tada · 1973 · 1
28. The role of material orthotropy in fracture specimens for composites10.1016/0020-7683(92)90138-J ↗
29. Orthotropy rescaling and implications for fracture in composites10.1016/0020-7683(91)90208-W ↗
30. Fracture toughness of fabrics as composite reinforcements10.1007/BF02326487 ↗
31. Strength of coated fabrics with crack10.1177/152808377800700403 ↗
32. Membrane material behavior: concepts, practice & developments
33. Mathematical fitting of modulus-strain curves of poly (ethylene Terephthalate) industrial yarns10.1177/004051758305301209 ↗
34. Analysis and discussion of the modulus-strain curves of poly (ethylene terephthalate) and polyamide industrial yarns10.1002/app.21286 ↗
35. Chen · 2015
36. Central tearing characteristics of laminated fabrics: effect of slit parameter, off-axis angle, and loading speed10.1177/0731684417695460 ↗
37. Determination of the Mode I critical J-integral of copy paper10.1016/j.engfracmech.2016.10.017 ↗
38. A simplified determination of the J-integral for paper10.1007/BF01159839 ↗
39. Fracture toughness of liner board evaluated by the J-integral10.1007/BF00545548 ↗
40. On cracks in rectilinearly anisotropic bodies10.1007/BF00186854 ↗
41. A finite element calculation of stress intensity factors by a modified crack closure integral10.1016/0013-7944(77)90013-3 ↗
42. Irwin · 1958
43. A new elasto-plastic material model for coated fabric10.1016/j.engstruct.2014.04.027 ↗
44. On nonlinear effects in fracture mechanics10.1016/0013-7944(71)90037-3 ↗
45. Fracture toughness of woven textile composites10.1016/j.engfracmech.2016.11.027 ↗
46. Influence of loading conditions on the measurement of mode I critical stress intensity factor for wood and medium-density fiberboard by the single-edge-notched tension test10.1515/hf.2010.119 ↗
47. Experimental analysis of tensile behaviors of polytetrafluoroethylene-coated fabrics subjected to monotonous and cyclic loading10.1177/0040517513494259 ↗
48. Experimental and numerical study on nonlinear mechanical properties of laminated woven fabrics10.1016/j.conbuildmat.2018.01.004 ↗