Effect of mix proportions on rheology and permeability of cement grouts containing viscosity modifying admixture
Source abstract
Abstract
Abstract This paper reports the effect of mix composition of grout on the fluidity, rheological behaviour and hydro-mechanical behaviour (permeability and compressibility). Factorial design was used in this investigation to assess the combined effects of the four mix composition parameters on fluidity, rheological properties, permeability and compressibility: water/binder ratio (W/B), percentage of limestone filler as replacement of cement (LF), dosage of viscosity modifying admixture (VMA), and dosage of superplasticiser (SP). To evaluate both the rheology of the cement grout and its hydro-mechanical behaviour, mini-slump test, Lombardi plate test, and forced bleeding test, coaxial rotating cylinder viscometer were used. A two-level fractional factorial model was used to model the effect of key variables on the fluidity, the cohesion, permeability and compressibility. The predicted models are valid for mixtures made with W/B ranged from 0.35 to 0.42, LF from 12% to 45% as replacement of cement, VMA (percentage of binder) from 0.02 to 0.7%, and SP from 0.3 to 1.2%. The effects of W/B, LF, VMA and SP were analysed using polynomial regression which can identify the primary factors and their interactions on the measured properties. Prediction models were developed for mini-slump, plate cohesion meter, permeability and compressibility as function of W/B, LF, VMA, and SP. The factorial statistical approach used highlighted the effect of W/B, the dosages of SP and VMA on the various rheological properties, permeability and compressibility.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Grouting, Rheology, and Soil Mechanics · Innovations in Concrete and Construction Materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. G. Gustafson, H. Stille. Stop criteria for cement grouting. Felsbau: Zeitschrift für Geomechanik und Ingenieurgeologie im Bauwesen und Bergbau 2005;25:62–68.
2. Elastic wave validation of large concrete structures repaired by means of cement grouting10.1016/j.conbuildmat.2009.01.005 ↗
3. Warner · 2004
4. Three-leaf stone masonry strengthened by injecting cement grouts10.1061/(ASCE)0733-9445(1995)121:5(848) ↗
5. Experimental study of cement grout: rheological behavior and sedimentation10.1016/S0008-8846(02)01036-0 ↗
6. Friction coefficient of steel on concrete or grout10.1061/(ASCE)0733-9445(1985)111:3(505) ↗
7. Optimisation of rheological parameters and mechanical properties of superplasticised cement grouts containing metakaolin and viscosity modifying admixture10.1016/j.conbuildmat.2012.07.102 ↗
8. Effect of nanosilica addition on the fresh properties and of mortars with fly ash and superplasticiser. Construction and10.1016/j.conbuildmat.2015.02.064 ↗
9. Effect of welan gum-high-range water reducer combinations on rheology of cement grout
10. HPMC and HEMC influence on cement hydration10.1016/j.cemconres.2005.08.003 ↗
11. The effect of viscosity modifying agents on mortar and concrete10.1016/j.cemconcomp.2007.01.004 ↗
12. Bouzoubaa N., Performance of new viscosity modifying admixtures in enhancing the rheological properties of cement paste10.1016/S0008-8846(03)00233-3 ↗
13. Rheological properties of grouts with viscosity modifying agents as diutan gum and welan gum incorporating pulverised fly ash10.1016/j.cemconres.2006.05.016 ↗
14. Optimization of cement grouts containing silica fume and viscosity modifying admixture10.1061/(ASCE)MT.1943-5533.0000026 ↗
15. Particle-bed 3D printing in concrete construction – Possibilities and challenges10.1016/j.cemconres.2018.05.018 ↗
16. Penetration of cement pastes into sand packings during 3D printing: analytical and experimental study10.1617/s11527-018-1148-5 ↗
17. Effect of supplementary cementitious materials on rheological properties, bleeding, and strength of structural grout
18. Performance characteristics of cement grouts made with various combinations of high-range water reducer and cellulose-based viscosity modifier10.1016/S0008-8846(03)00214-X ↗
19. Permeability measurement of fresh cement paste10.1016/j.cemconres.2010.11.019 ↗
20. Hydro-mechanical properties of fresh cement pastes containing polycarboxylate superplasticizer10.1016/j.cemconres.2013.06.015 ↗
21. Determination of the consolidation coefficient of low compressibility materials: application to fresh cement-based materials10.1617/s11527-014-0247-1 ↗
22. Effects of mix design parameters on consolidation behaviour of fresh cement-based materials10.1617/s11527-016-0988-0 ↗
23. Montgomery · 2005
24. Applications of statistical models for proportioning underwater concrete
25. Medium strength self-compacting concrete containing fly ash: modelling using factorial experimental plans10.1016/j.cemconres.2003.12.022 ↗
26. European Committee for Standardization. EN 197-1: 2011 Cement - Part 1: Composition, specifications and conformity criteria for common cements. 2011.
27. Influence of water reducing admixtures on properties of cement paste - a miniature slump test10.1520/CCA10190J ↗
28. The Role of cohesion in the cement grouting of rock
29. Influence of thixotropy on stability characteristics of cement grout and concrete
30. Ferguson · 1991 · 199
31. Determining the water-cement ratio, cement content, water content and degree of hydration of hardened cement paste: Method development and validation on paste samples10.1016/j.cemconres.2009.06.013 ↗
32. Yield stress and bleeding of fresh cement pastes10.1016/j.cemconres.2012.03.015 ↗
33. Steady state flow of cement suspensions: a micromechanical state of the art10.1016/j.cemconres.2009.08.026 ↗
34. Extension of spread-slump formulae for yield stress evaluation
35. Fifty-cent rheometer for yield stress measurements: From slump to spreading flow10.1122/1.1879041 ↗
36. Modelling the yield stress of ternary cement–slag–fly ash pastes based on particle size distribution10.1016/j.powtec.2014.06.041 ↗
37. Yodel: a yield stress model for suspensions10.1111/j.1551-2916.2005.00888.x ↗
38. D. Lowke. Interparticle forces and rheology of cement based suspensions. Proceedings of the NICOM3 - Nanotechnology in Construction, Prague, 2009:295-301.10.1007/978-3-642-00980-8_39 ↗
39. Polyacrylamide induced flocculation of a cement suspension -10.1016/j.ces.2005.11.013 ↗
40. Cellulose ethers and yield stress of cement pastes10.1016/j.cemconres.2013.06.013 ↗
41. 20 - Working mechanism of viscosity-modifying admixtures
42. A mechanism for non-Newtonian flow in suspensions of rigid spheres10.1122/1.548848 ↗
43. The microstructure of dispersed and non-dispersed fresh cement pastes — New insight by cryo-microscopy10.1016/j.cemconres.2007.11.007 ↗
44. The influence of limestone additions on the rheological properties and water retention value of portland cement slurries
45. The Desirability function