journal article·2019-07

Laboratory evaluation of the effect of synthetic Polyolefin-glass fibers on performance properties of hot mix asphalt

Hasan Ziari, Ali Moniri

Publisher page

Abstract

Abstract The synthetic compound fibers have been introduced as a modifier to improve rutting, fatigue and low-temperature behavior of asphalt mixtures. In this research, the combination of Polyolefin powders and glass fibers was used by different percentages as an additive in hot mix asphalt, and the performance properties of modified and unmodified asphalt mixtures were evaluated using resilient modulus, modified Lottman, water boiling, dynamic creep, indirect tensile fatigue and SCB fracture tests. The results indicated that using up to 0.12% of the synthetic fiber by weight of total mixture enhanced the performance of the mixture in all studied aspects as the Polyolefin component helped the elastic behavior and rutting resistance, and the high strength glass fibers improved the tensile strength, fatigue and crack resistance. However, increasing the amount of polyolefin-glass fiber to 0.18% had some adverse effect on resilient modulus, fatigue, fracture, and tensile resistance of the mixtures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Effectiveness of Linear Amplitude Sweep (LAS) asphalt binder test in predicting asphalt mixtures fatigue performance10.1016/j.conbuildmat.2018.03.146 ↗
2. Laboratory investigation of rutting performance of warm mix asphalt containing high content of reclaimed asphalt pavement10.1080/10916466.2017.1316738 ↗
3. Effect of copper slag on performance of warm mix asphalt
4. Fracture toughness prediction using Weibull statistical method for asphalt mixtures containing different air void contents10.1111/ffe.12474 ↗
5. Investigation of rheological and fatigue properties of asphalt mixtures containing polyester fibers10.1016/j.conbuildmat.2007.07.018 ↗
6. Fiber-reinforced asphalt-concrete–a review10.1016/j.conbuildmat.2009.11.009 ↗
7. Polymer modified bitumen10.1179/1433075X11Y.0000000021 ↗
8. Evaluation of asphalt mixture modified with graphite and carbon fibers for winter adaptation: thermal conductivity improvement10.1061/(ASCE)MT.1943-5533.0001675 ↗
9. Evaluation of fracture resistance of warm mix asphalt containing jute fibers10.1016/j.conbuildmat.2016.04.128 ↗
10. R.S. McDaniel, Fiber additives in asphalt mixtures (no. Project 20-05 (Topic 45-15)). 2015.10.17226/22191 ↗
11. Evaluating the fatigue properties of hot mix asphalt reinforced by recycled PET fibers using 4-point bending test10.1016/j.conbuildmat.2017.02.082 ↗
12. Cracking resistance of fiber reinforced asphalt concrete at −20 °C10.1016/j.conbuildmat.2015.02.005 ↗
13. Characterization of asphalt mastics reinforced with basalt fibers10.1016/j.conbuildmat.2017.11.012 ↗
14. Study on the graphite and carbon fiber modified asphalt concrete10.1016/j.conbuildmat.2010.11.082 ↗
15. Investigation of microwave healing performance of electrically conductive carbon fiber modified asphalt mixture beams10.1016/j.conbuildmat.2016.09.039 ↗
16. Performance characteristics of fiber modified hot mix asphalt10.1016/j.conbuildmat.2018.04.221 ↗
17. Effects of phosphorus slag powder and polyester fiber on performance characteristics of asphalt binders and resultant mixtures10.1016/j.conbuildmat.2017.02.141 ↗
18. J.R. Wu, Q.Y. Ma, X. H. Dong, Test and analysis on asphalt content for fatigue performance of polyester fiber asphalt concrete, in: Materials Science Forum, vol. 852, 2016, pp. 1488–1492: Trans Tech Publ.10.4028/www.scientific.net/MSF.852.1488 ↗
19. Determination of the optimum conditions for gilsonite and glass fiber in HMA under mixed mode I/III loading in fracture tests10.1061/(ASCE)MT.1943-5533.0002278 ↗
20. Experiments of fracture behavior of glass fiber reinforced asphalt concrete
21. Improvement of asphalt mixture performance with glass macro-fibers10.1016/j.conbuildmat.2017.12.198 ↗
22. The effect of polypropylene fibers on asphalt performance10.1016/j.buildenv.2007.02.011 ↗
23. Engineering behavior of aged polypropylene-modified asphalt pavements10.1016/j.conbuildmat.2018.10.007 ↗
24. Erratum to: rheological properties of polypropylene reinforced asphalt binder10.1007/s40515-016-0034-2 ↗
25. Laboratory and field evaluation of the warm fiber reinforced high performance asphalt mixtures (case study Karaj-Chaloos Road)10.1016/j.conbuildmat.2016.05.139 ↗
26. Evaluation of fiber-reinforced asphalt mixtures using advanced material characterization tests10.1520/JTE102442 ↗
27. Advanced characterization of asphalt concrete mixtures reinforced with synthetic fibers10.1061/(ASCE)MT.1943-5533.0002521 ↗
28. Effect of polymer fibres reinforcement on selected properties of asphalt mixtures10.1016/j.proeng.2017.02.026 ↗
29. Assessment of fiber-reinforced asphalt concrete mixes using advanced material characterization
30. Performance of fiber-reinforced asphalt concretes with various asphalt binders in Thailand10.1061/(ASCE)MT.1943-5533.0002433 ↗
31. The influence of natural and synthetic fibers on low temperature mixed mode I+ II fracture behavior of warm mix asphalt (WMA) materials10.1016/j.engfracmech.2017.06.003 ↗
32. Optimum parafibre length according to mechanical properties in hot mix asphalt
33. The impacts of type and proportion of five different asphalt modifiers on the low temperature fracture toughness and fracture energy of modified HMA10.3221/IGF-ESIS.47.14 ↗
34. Fiber-reinforced hot-mix asphalt: Idaho case study10.3141/2633-12 ↗
35. D. ASTM, 3515, Standard Specification for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures, Annual Book of Standards, vol. 4, 2004.
36. A.D. T245, Standard method of test for resistance to plastic flow of bituminous mixtures using Marshall Apparatus, ed: AASHTO Washington, DC, 2004.
37. A. ASTM, D7369 standard test method for determining the resilient modulus of bituminous mixtures by indirect tension test, American Society for Testing and Materials, Conshohocken, PA, United States, 2011.
38. A. Standard, D6931, Standard test method for indirect tensile (IDT) strength of bituminous mixtures. ASTM, West Conshohocken, PA, 2012.
39. T. AASHTO, 283, Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage, Standard Specification, American Association of State Highway and Transportation Officials, Washington, DC, 2007.
40. Evaluating the effect of amorphous carbon powder on moisture susceptibility and mechanical resistance of asphalt mixtures10.1016/j.conbuildmat.2017.06.036 ↗
41. Moisture susceptibility evaluation of asphalt mixtures containing Evonik, Zycotherm and hydrated lime10.1016/j.conbuildmat.2017.12.113 ↗
42. A. Standard, D3625-96: Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water, American Society for Testing and Materials, Book of Standards, vol. 4, 2005.
43. Laboratory evaluation of the effect of nano-organosilane anti-stripping additive on the moisture susceptibility of HMA mixtures under freeze–thaw cycles10.1016/j.conbuildmat.2013.07.030 ↗
44. Moisture susceptibility of warm mixed-reclaimed asphalt pavement containing Sasobit and Zycotherm additives10.1080/10916466.2017.1290655 ↗
45. Laboratory investigation of moisture susceptibility of warm-mix asphalt mixtures containing steel slag aggregates10.1080/10298436.2014.953502 ↗
46. M. Witczak, C. Schwartz, H. Von Quintus, NCHRP Project 9-19: Superpave support and performance models management, Interim Report, Federal Highway Administration, National Cooperative Highway Research Program, 2001.
47. Characterization of rutting resistance of EBS-modified asphalt mixtures10.1080/10916466.2016.1181655 ↗
48. A. Standard, D8044-16: Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures, Book of Standards, vol. 4, 2016.
49. Fracture resistance characterization of superpave mixtures using the semi-circular bending test10.1520/JAI12264 ↗
50. Application of generalized J-integral to crack propagation modeling of asphalt concrete under repeated loading10.3141/2127-09 ↗
51. Moisture damage characterization of warm-mix asphalt mixtures based on laboratory-field evaluation10.1016/j.conbuildmat.2011.12.085 ↗
52. Fracture properties of asphalt mixtures using semi-circular bending test: a state-of-the-art review and future research10.1016/j.conbuildmat.2015.12.046 ↗
53. Characterization of asphalt mixture’s fracture resistance using the semi-circular bending (SCB) test
54. Investigation of fatigue and fracture properties of asphalt mixtures modified with carbon nanotubes10.1111/ffe.12408 ↗
55. The effect of Lucobit polymer on bitumen performance10.1080/10916466.2013.769572 ↗
56. Linear rheology of bituminous mastics modified with various polyolefins: a comparative study with their source binders10.1617/s11527-016-0953-y ↗
57. Effect of zycotherm on moisture susceptibility of Warm Mix Asphalt mixtures prepared with different aggregate types and gradations10.1016/j.conbuildmat.2016.04.143 ↗
58. Fatigue and deformation properties of glass fiber reinforced bituminous mixes
59. Fatigue rheological characterization of polymer-modified bitumens and mastics
60. Asphalt mixtures
61. Crack propagation parametric assessment of modified asphalt mixtures using linear elastic fracture mechanics approach10.1520/JTE20140510 ↗