journal article·2019-07

Experimental analysis of the correlation between bending strength and SMFL of corroded RC beams

Junli Qiu, Hong Zhang, Jianting Zhou, Hu Ma, Leng Liao

Publisher page

Abstract

Abstract Measuring the bearing capacity is critical for assessing the safety and durability of civil engineering structures. However, the existing non-destructive testing (NDT) techniques cannot estimate the bending strengths of corroded reinforced concrete (RC) beams easily. Thus, the correlation between self-magnetic flux leakage (SMFL) and bending strength of corroded RC beams was investigated in this study to estimate the bending strength. First, a theoretical model was established based on the physical properties of ferromagnetic materials and engineering mechanics. Preliminary research found that the peak-to-valley differences of the SMFL curves of corroded RC beams were strongly correlated with the bending strength. The normalized peak-to-valley differences NBP(x) and normalized bending strength NBS were defined based on this correlation. NBS of corroded RC beams can be evaluated using NBP(x) of SMFL curves. The data from 18 corroded RC beams and the theoretical model were analyzed and employed to verify the correlation between NBP(x) and NBS. The experimental results were consistent with those predicted by theory and showed the semi-quantitative correlation that NBP(x) was related to NBS exponentially (without stirrups) or approximate linearly (with stirrups). Therefore, the bending strength can be estimated semi-quantitatively via the SMFL curves. In this work, a novel correlation between the SMFL and bending strengths of corroded RC beams was established. The SMFL technique can be regarded as a new effective NDT technique for estimating the bending strength of corroded RC beams.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Non-Destructive Testing Techniques · Geophysical Methods and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Deterioration of concrete due to reinforcement steel corrosion10.1016/0958-9465(95)00043-7 ↗
2. Prediction of corrosion-induced cover cracking in reinforced concrete structures10.1016/j.conbuildmat.2010.11.074 ↗
3. Cover cracking of reinforced concrete due to rebar corrosion induced by chloride penetration10.1016/j.cemconres.2011.04.008 ↗
4. Compressive strength loss and reinforcement degradations of reinforced concrete structure due to long-term exposure10.1016/j.conbuildmat.2009.12.003 ↗
5. Numerical simulation of monitoring corrosion in reinforced concrete based on ultrasonic guided waves
6. Estimation of the stress level on a cross section of a reinforced concrete beam via Acoustic emission Intensity Distribution (AID) analysis10.1016/j.conbuildmat.2018.01.002 ↗
7. Correlation between acoustic emission distribution and stress variation through the depth of RC beam cross sections10.1016/j.conbuildmat.2017.06.001 ↗
8. An innovative corrosion evaluation technique for reinforced concrete structures using magnetic sensors10.1016/j.conbuildmat.2016.12.157 ↗
9. Monitoring reinforcement corrosion and corrosion-induced cracking by X-ray microcomputed tomography method10.1016/j.cemconres.2017.07.009 ↗
10. Corrosion detection in reinforced concrete using induction heating and infrared thermography10.1007/s13349-010-0002-4 ↗
11. Special constructed and optimised eddy-current sensors for measuring force and strain in steel reinforced concrete10.1016/S0924-4247(03)00156-0 ↗
12. Study on the effect of elastic stress and microstructure of low carbon steels on barkhausen noise10.1007/s10921-013-0180-1 ↗
13. On the correlation between magnetoacoustic emission and magnetostriction dependence on the applied magnetic field10.1016/j.jmmm.2016.03.018 ↗
14. The quantitative interpretation by measurement using the magnetic memory method (MMM)-based on density functional theory10.1016/j.ndteint.2013.01.002 ↗
15. Magnetic field techniques for the inspection of steel under concrete cover10.1016/S0963-8695(00)00051-7 ↗
16. Modeling and experimental studies on 3D-magnetic flux leakage testing for enhanced flaw detection in carbon steel plates
17. The Non-destructive test of steel corrosion in reinforced concrete bridges using a micro-magnetic sensor10.3390/s16091439 ↗
18. Quantitative study on corrosion of steel strands based on self-magnetic flux leakage10.3390/s18051396 ↗
19. Calibration patterns for predicting residual strengths of steel fibre reinforced concrete (SFRC)10.1016/j.compositesb.2013.10.086 ↗
20. A new judging criterion for corrosion testing of reinforced concrete based on self-magnetic flux leakage
21. Damage imaging of reinforced concrete structures using electromagnetic migration algorithm10.1016/j.ijsolstr.2005.08.017 ↗
22. Subspace constrained regularization for corrosion detection with magnetic induction tomography10.1016/j.ndteint.2008.05.006 ↗
23. Quantitative analysis of magnetic anomaly of reinforcements in bored in-situ concrete piles10.1007/s11770-009-0027-9 ↗
24. Computer aided modeling of magnetic behavior of embedded prestressing strand for corrosion estimation10.1007/s10921-012-0165-5 ↗
25. Magnetic flux leakage detection of corrosion damage in prestressed concrete poles
26. Practical assessment of magnetic methods for corrosion detection in an adjacent precast, prestressed concrete box-beam bridge10.1080/10589759.2012.695785 ↗
27. Flexural behavior of strengthened concrete beams with corroding reinforcement10.1016/j.conbuildmat.2005.01.059 ↗
28. Corrosion of the reinforcement and its influence on the residual structural performance of a 26-year-old corroded RC beam10.1016/j.conbuildmat.2013.11.015 ↗
29. Corrosion process and structural performance of a 17 year old reinforced concrete beam stored in chloride environment10.1016/j.cemconres.2007.08.004 ↗
30. MOHURD of the People’s Republic of China. Code for design of concrete structures (GB 50010-2010), China Architecture & Building Press, Beijing, China.
31. Research on the stress-magnetism effect of ferromagnetic materials based on three-dimensional magnetic flux leakage testing10.1016/j.ndteint.2013.11.002 ↗
32. Quantitative study of metal magnetic memory signal versus local stress concentration10.1016/j.ndteint.2010.05.007 ↗
33. The magnetic leakage field of surface-breaking cracks10.1088/0022-3727/19/4/018 ↗
34. Experimental study on residual bending strength of corroded reinforced concrete beam based on micromagnetic sensor10.3390/s18082635 ↗