Evolution of pore structure of oil well cement slurry in suspension–solid transition stage
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Drilling and Well Engineering · Grouting, Rheology, and Soil Mechanics · Hydraulic Fracturing and Reservoir Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Rigby · 2008
2. Theory-based review of limitations with static gel strength in cement/matrix characterization10.2118/178923-PA ↗
3. Design of low-density cement optimized by cellulose-based fibre for oil and natural gas wells10.1016/j.powtec.2018.07.016 ↗
4. Research on the influence of K-PAM on the microstructure of cement slurry10.1680/adcr.14.00074 ↗
5. A study of completion practices to minimize gas communication10.2118/3164-PA ↗
6. Study of factors causing annular gas flow following primary cementing
7. Transition time of cement slurries between the fluid and set states
8. B.R. Crook, J. Heathman, Predicting potential gas-flow rates to determine best cementing practices short-term gas migration, 1998.
9. Magnitude of the 2010 Gulf of Mexico oil leak10.1126/science.1195840 ↗
10. Porosity of oil well cement slurries during setting10.1680/adcr.1995.7.25.9 ↗
11. A newly developed wellbore-simulation apparatus to study performance of oilwell cements10.2118/191129-PA ↗
12. Gas migration through cement slurries analysis: a comparative laboratory study
13. Modeling early time gas migration through cement slurries10.2118/27878-PA ↗
14. Microstructural evolution of cemented paste backfill: mercury intrusion porosimetry test results10.1016/j.cemconres.2007.08.016 ↗
15. Experimental study and analytical model for pore structure of hydrated cement paste10.1016/j.clay.2014.07.031 ↗
16. Influence of pozzolans and slag on the microstructure of partially carbonated cement paste by means of water vapour and nitrogen sorption experiments and BET calculations10.1016/j.cemconres.2010.08.014 ↗
17. Structure and physical properties of hardened portland cement paste10.1111/j.1151-2916.1958.tb13494.x ↗
18. Characterization of marcellus shale and huntersville chert before and after exposure to hydraulic fracturing fluid via feature relocation using field-emission scanning electron microscopy10.1016/j.fuel.2016.05.061 ↗
19. Comparisons of SEM, low-field NMR, and mercury intrusion capillary pressure in characterization of the pore size distribution of lacustrine shale: a case study on the Dongying depression, Bohai Bay Basin, China10.1021/acs.energyfuels.7b01625 ↗
20. Pore water distribution in mortar during drying as determined by NMR10.1007/BF02482126 ↗
21. Effect of drying on cement-based materials pore structure as identified by mercury intrusion porosimetry: a comparative study between oven-, vacuum-, and freeze-drying10.1016/S0008-8846(01)00594-4 ↗
22. Effect of drying procedures on pore structure and phase evolution of alkali-activated cements10.1016/j.cemconcomp.2018.12.003 ↗
23. Characterization of nanoporous systems in gas shales by low field NMR cryoporometry10.1021/acs.energyfuels.6b01780 ↗
24. An NMR study of porous rock and biochar containing organic material10.1016/j.micromeso.2013.04.004 ↗
25. Studies of nano-structured liquids in confined geometries and at surfaces10.1016/j.pnmrs.2009.09.001 ↗
26. Nuclear magnetic resonance T2 spectrum: multifractal characteristics and pore structure evaluation10.1007/s11770-017-0614-0 ↗
27. Characterization of pore structures of hydrated cements and natural shales by 129Xe NMR spectroscopy10.1016/j.micromeso.2017.06.038 ↗
28. Use of bench-top NMR to measure the density, composition and desorption isotherm of C-S-H in cement paste10.1016/j.micromeso.2013.01.032 ↗
29. Water balance and pore structure development in cementitious materials in internal curing with modified superabsorbent polymer studied by NMR10.1016/j.micromeso.2009.02.024 ↗
30. Surface relaxivity of cement hydrates10.1021/jp500055p ↗
31. The determination of surface development in cement pastes by nuclear magnetic resonance10.1111/j.1151-2916.1982.tb09917.x ↗
32. Characterisation of intra- and inter-C-S-H gel pore water in white cement based on an analysis of NMR signal amplitudes as a function of water content10.1016/j.cemconres.2010.08.003 ↗
33. NMR relaxation of molecules confined inside the cement paste pores under partially saturated conditions10.1016/j.cemconres.2016.07.012 ↗
34. American Petroleum Institute (API), API RP-10A, Specification for cements and materials for well cementing, 23rd Edition, (2002).
35. Early hydration and setting of oil well cement10.1016/j.cemconres.2010.03.014 ↗
36. Hydration kinetics and microstructure development of normal and CaCl2-accelerated tricalcium silicate pastes10.1021/jp907078u ↗
37. Zwitterionic copolymer for controlling fluid loss in oilwell cementing: preparation, characterization, and working mechanism10.1002/pen.24387 ↗
38. American Petroleum Institute (API), API 10B-2, Recommended practice for testing well cements, Second Edition, (2013).
39. The use of nitrogen adsorption to assess the microstructure of cement paste10.1016/S0008-8846(01)00493-8 ↗
40. Microstructure and flow behavior of fresh cement paste10.1111/j.1151-2916.1997.tb03086.x ↗
41. Pore-size resolved water vapor adsorption kinetics of white cement mortars as viewed from proton NMR relaxation10.1016/j.cemconres.2017.12.002 ↗
42. The BET-specific surface area of hydrated Portland cement and related materials10.1016/S0008-8846(03)00225-4 ↗
43. The determination of pore volume and area distributions in porous substances. I. Computations from nitrogen isotherms
44. The determination of pore volume and area distributions in porous substances. II. Comparison between nitrogen isotherm and mercury porosimeter methods
45. NMR observation of water transfer between a cement paste and a porous medium10.1016/j.cemconres.2017.02.027 ↗
46. Relationship between the microstructure/pore structure of oil-well cement and hydrostatic pressure10.1007/s11242-018-1078-2 ↗
47. The degree of hydration assessment of blended cement pastes by differential thermal and thermogravimetric analysis. Morphological evolution of the solid phases10.1016/j.tca.2014.08.008 ↗
48. Investigation of blended cement hydration by isothermal calorimetry and thermal analysis10.1016/j.cemconres.2004.10.027 ↗
49. Carbonation of cement-based materials: challenges and opportunities10.1016/j.conbuildmat.2016.05.080 ↗
50. An investigation of the carbonation of cement paste using trimethylsilylation10.1680/adcr.1989.2.7.99 ↗
51. An FTIR and XPS investigations of the effects of carbonation on the solidification/stabilization of cement based systems-Portland type V with zinc10.1016/0008-8846(93)90031-4 ↗
52. Pore structures of hydrated calcium silicates and portland cements by nitrogen adsorption10.1016/0021-9797(70)90219-5 ↗
53. Investigation of the microstructural evolution of calcium sulfoaluminate cements by thermoporometry10.1016/j.cemconres.2013.06.012 ↗
54. A reassessment of mercury intrusion porosimetry by comparison with 1H NMR relaxometry10.1016/j.cemconres.2017.05.024 ↗
55. A novel method to predict internal relative humidity in cementitious materials by 1H NMR10.1016/j.cemconres.2017.11.001 ↗
56. Microstructure and texture of hydrated cement-based materials: a proton field cycling relaxometry approach10.1016/j.cemconres.2006.08.002 ↗
57. Comparison of methods for arresting hydration of cement10.1016/j.cemconres.2011.06.003 ↗
58. Determination of cement hydration and pozzolanic reaction extents for fly-ash cement pastes10.1016/j.conbuildmat.2011.07.007 ↗
59. The use of DTA/TGA to study the effects of ground quartz with different surface areas in autoclaved cement: Quartz pastes. Part 1: a method for evaluating DTA/TGA results10.1016/S0040-6031(96)03033-X ↗
60. Refinements to colloid model of C-S-H in cement: CM-II10.1016/j.cemconres.2007.10.006 ↗
61. Nano-structural changes of C-S-H in hardened cement paste during drying at 50°C10.3151/jact.5.313 ↗