Attenuation of acoustic wave excited by piezoelectric aggregate in asphalt pavement and its application to monitor concealed cracks
Source abstract
Abstract
Abstract The use of sensors to monitor concealed cracks in asphalt pavement has become a research topic of interest. In this paper, piezoelectric aggregates (PAs) were embedded into an asphalt pavement. One was used as an actuator for transmitting a signal, and the other as a sensor for receiving the signal. The coefficient of acoustic wave attenuation a, referring to the amplitude ratio of the excitation signal to receiving signal, decreases as crack width in an asphalt pavement increases, indicating that the application of acoustic waves excited by PA to monitor concealed cracks of asphalt pavement is feasible. The driving frequency imposes obvious influence on the a, which is at its maximum when the driving frequency is 500 Hz. The value of a decreases as asphalt viscosity, nominal maximum particle size and air voids increase, and as asphalt content decreases. Temperature and moisture have obvious influences on wave attenuation, and the value of a increases as temperature and moisture increase. A more universal indicator–average absolute deviation (AAD) was proposed, which is independent of the asphalt mixture properties and grows linearly with the crack width in an asphalt pavement. In practical engineering, the pavement concealed cracks can be monitored by the acoustic saves excited by PA and be calculated by ADD. This study provides a reference for the development and application of intelligent monitoring of concealed damage in asphalt pavements.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Structural Health Monitoring Techniques · High voltage insulation and dielectric phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Application of numerical simulation method to improve shear strength and rutting resistance of asphalt mixture
2. Comparison on properties of cement-stabilised gravel prepared by different laboratory compaction methods10.1080/14680629.2017.1423105 ↗
3. Pavement health monitoring system based on an embedded sensing network10.1061/(ASCE)MT.1943-5533.0000976 ↗
4. Nondestructive testing of asphalt pavements for structural condition evaluation: a state of the art10.1080/10589750701848697 ↗
5. Evaluation of the hall effect sensor for pavement instrumentation10.1520/JTE10409J ↗
6. Using fiber-optic sensing techniques to monitor behavior of transportation materials
7. Continuous primary dynamic pavement response system using piezoelectric axle sensors10.1139/l04-087 ↗
8. Pavement shear strain response to dual and wide-base tires10.3141/2225-17 ↗
9. Optical fiber Bragg grating sensor assembly for 3D strain monitoring and its case study in highway pavement10.1016/j.ymssp.2011.10.003 ↗
10. An integrated approach for structural health monitoring using an in-house built fiber optic system and non-parametric data analysis10.12989/sss.2014.14.5.917 ↗
11. Quality control of asphalt pavement compaction using fibre Bragg grating sensing technology10.1016/j.conbuildmat.2013.12.032 ↗
12. Duration model estimation for pavement rehabilitation and service life
13. Predicting asphalt pavement crack initiation following rehabilitation treatments10.1016/j.trc.2015.03.031 ↗
14. A self-powered damage detection sensor10.1243/030932403321163640 ↗
15. Wireless sensors for structural health monitoring and damage detection techniques
16. ePave: A self-powered wireless sensor for smart and autonomous pavement10.3390/s17102207 ↗
17. A self-powered mechanical strain energy sensor10.1088/0964-1726/10/2/314 ↗
18. Optimization design and experimental investigation of piezoelectric energy harvesting devices for pavement10.1016/j.apenergy.2018.07.036 ↗
19. Fabrication and performance of a power generation device based on stacked piezoelectric energy-harvesting units for pavements10.1016/j.enconman.2018.02.045 ↗
20. Numerical simulation and experimental research on harvesting piezoelectric voltage from asphalt pavement
21. Continuous health monitoring of pavement systems using smart sensing technology10.1016/j.conbuildmat.2016.03.128 ↗
22. A new approach for damage detection in asphalt concrete pavements using battery-free wireless sensors with non-constant injection rates10.1016/j.measurement.2017.06.035 ↗
23. Ultrasonic NDE of concrete
24. Image-based simulation of wave propagation and its application to UT modelings
25. Mechanical impedance based embedded piezoelectric transducer for reinforced concrete structural impact damage detection: a comparative study10.1016/j.conbuildmat.2018.01.039 ↗
26. Yang · 2017
27. Experimental study on signal stability of piezoelectric intelligent aggregate with environmental temperature change
28. RIOH · 2011
29. RIOH · 2005
30. RIOH · 2004
31. Sun · 2009
32. Numerical simulation of the fractured model acoustic attenuation coefficient