A comparative study of modified fall cone method and semi-adiabatic calorimetry for measurement of setting time of cement based materials
Source abstract
Abstract
Abstract Setting time is a critical parameter that limits the workability of cement-based materials and is generally determined using a Vicat needle test for cement paste, or by measuring the penetration resistance for mortar and concrete. The Vicat needle and penetration tests, however, are either adequate for cement paste or mortars, instead of all types of cementitious materials. Therefore, a modified fall cone method (FCM) was developed to serve as a unified test protocol for measuring the setting time of both cement paste and mortars while the semi-adiabatic calorimetry (SAC) was employed for a comparative study. Mortar samples with various mix proportions and aggregate sizes were tested by both methods. Two models were established to fit the FCM and SAC data, and the initial and final setting times were obtained by taking extremums from the derivatives. Test results indicated that the setting time measured by the FCM were consistently shorter than those measured by the SAC and such discrepancy gradually decreased with the increase of cement/sand ratio (wc/ws) and finally disappeared when pure cement paste was achieved. The discrepancy of the setting time measured from different methods is attributed to the mixing of aggregates, which significantly enhances the penetration resistance of mortar but only has a moderate effect on heat evolution at early-age hydration.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Setting time study of roller compacted concrete by spectral analysis of transmitted ultrasonic signals10.1016/0963-8695(94)00006-6 ↗
2. Application of ultrasonic measurements for determination of setting and hardening in cement paste
3. Determination of mortar setting times using shear wave velocity evolution curves measured by the bender element technique10.1016/j.cemconres.2018.01.013 ↗
4. T. Voigt, The application of an ultrasonic shear wave reflection method for nondestructive testing of cement-based materials at early ages (PhD. Thesis), Leipzig, 2004.
5. ISO 9597: Cement-test Methods – Determination of Setting Time and Soundness, 2008.
6. ASTM C191 · 2013
7. AASHTO T131-06 · 2007
8. ASTM C403/C403M-99 · 1999
9. ASTM C266 · 2008
10. AASHTO T154 · 1991
11. Rheology of penetrations tests II: penetrometers, Vicat and Hilti needles
12. The inspection and testing of cements10.1016/S0016-0032(02)90193-6 ↗
13. ASTM C807 · 2018
14. A new method to determine initial setting time of cement and concrete using plate test10.1617/s11527-015-0709-0 ↗
15. Hydration of cementitious materials by pulse echo USWR10.1016/S0008-8846(00)00352-5 ↗
16. Continuous monitoring of setting and hardening of mortar and concrete10.1016/j.conbuildmat.2003.10.002 ↗
17. Enhanced series-parallel model for estimating the time-dependent thermal conductivity of fly ash soil mixtures10.1007/s10035-015-0577-x ↗
18. A novel feature selection method based on global sensitivity analysis with application in machine learning-based prediction model10.1016/j.asoc.2019.105859 ↗
19. Laboratory investigation and modelling of the thermal-mechanical properties of soil in shallow mineralized groundwater area10.1155/2019/5121740 ↗
20. Chemically stabilized soft clays for road-base construction10.1061/(ASCE)MT.1943-5533.0001156 ↗
21. A novel hybrid surrogate intelligent model for creep index prediction based on particle swarm optimization and random forest10.1016/j.enggeo.2019.105328 ↗
22. Laboratory characterization and modelling of the thermal-mechanical properties of binary soil mixtures10.1016/j.sandf.2019.11.013 ↗
23. Application of ultrasonic testing to describe the hydration of calcium aluminate cement at the early age10.1016/S0008-8846(00)00446-4 ↗
24. Time of setting
25. Time of setting
26. Chung · 2010
27. Monitoring and evaluation of cement hydration by semi-adiabatic field calorimetry
28. A review of early-age properties of cement-based materials10.1016/j.cemconres.2007.09.005 ↗
29. Semiadiabatic (Isoperibol) solution calorimetry
30. Comparison of calorimetric methods for the assessment of slag cement hydration10.1080/17436753.2017.1288371 ↗
31. Experimental investigation of PCC incorporating RAP10.1186/s40069-018-0227-x ↗
32. Wang · 2007
33. Theory and practice of the fall cone test10.1680/geot.2001.51.8.701 ↗
34. Fall cone test to characterize shear strength of organic sediments10.1061/(ASCE)1090-0241(2009)135:1(153) ↗
35. Use of fall cone test as measurement of shear strength for soft clay materials10.1016/j.sandf.2012.07.002 ↗
36. Modified time of setting test for fly ash paste and fly ash-soil mixtures10.1061/(ASCE)MT.1943-5533.0000604 ↗
37. Simulations of fall cone test in soil mechanics using the material point method10.4028/www.scientific.net/AMM.846.336 ↗
38. ASTM C150 · 2011
39. ASTM C305 · 2012
40. DIN ISO/TS 17892-6: Geotechnical Investigation and Testing-Laboratory Testing of Soil-Part 6: Fall Cone Test, Int. Organ. Stand., 2017.
41. Cost · 2009
42. Characterization and performance prediction of cement-based materials using a simple isothermal calorimeter10.3151/jact.7.355 ↗
43. Advances in understanding hydration of Portland cement10.1016/j.cemconres.2015.05.025 ↗
44. Microstructure of concrete
45. Calcian dolomites and dedolomitization10.1038/217439a0 ↗
46. Feng · 2005
47. Wetting behavior of magnesite and dolomite surfaces10.1016/j.apsusc.2005.05.053 ↗
48. Influence of the roughness of aggregate surface on the interface bond strength10.1016/S0008-8846(01)00668-8 ↗
49. E. Berodier, Impact of the supplementary cementitious materials on the kinetics and microstructural development of cement hydration (Thèse EPFL), n° 6417, 2015 (http://infoscience.epfl.ch/record/204690/files/EPFL_TH6417.pdf).
50. Understanding the filler effect on the nucleation and growth of C-S-H10.1111/jace.13177 ↗