journal article·2017-09Open access

Improving the strength properties of recycled asphalt aggregate concrete

Rafal L. Al-Mufti, Anton N. Fried

Abstract

The querying of aggregate, for use in the manufacture of concrete, can have adverse environmental and ecological effects. The replacement of gravel aggregate with recycled (reclaimed) asphalt would help in the reduction of these effects. It can also help in reducing the quantity of recycled asphalt obtained from road re-surfacing that would otherwise be disposed of in landfill sites. The applications of concrete containing recycled asphalt have been very limited due to its low strength. This study investigates the feasibility of improving the strength of recycled asphalt concretes. This would increase the potential for using this type of concrete as an alternative to normal concrete, especially where medium strengths might be required. Concrete strength improvements would be achieved by changing the surface characteristics of recycled asphalt aggregate. This has been sought by using two methods; mechanical roughening and chemical solvent etching. It has been possible to improve the strength of concrete containing recycled asphalt to values similar to that of normal (gravel) concrete, by applying the mechanical roughening technique. Chemical etching has no effect on strength improvement of the concrete. The concretes have also been tested using non-destructive methods in the form of ultrasonic pulse velocity and rebound number. The effects of replacing gravel with different percentages of recycled asphalt on the strength, pulse velocity, and surface hardness of concrete are considered initially. The inclusion of recycled asphalt at 25% has resulted in the reduction of strength. The strength decreases further with an increase in the percentage (up to 100%) of recycled asphalt. All investigations were performed on early age concrete (1–28 days).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. ACI 228.2R-98 · 1998 · 228
2. Asphalt Pavement Alliance. Pavement type selection. APA. , 2010.
3. BRE: Building Research Establishment. Design of normal concrete mixes, second ed., London, 1997.
4. British Standards Institution, 2011. BS EN 197-1. Cement Part 1: Composition, specifications and conformity criteria for common cements British Standards Online, 2011.
5. British Standards Institution. BS EN 1008:2002. Mixing water for concrete — Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete. British Standards Online, , 2002.
6. British Standards Institution. BS EN 1097–6:2000. Tests for mechanical and physical properties of aggregates— Part 6: Determination of particle density and water absorption. British Standards Online, 2000.
7. British Standards Institution. BS EN 12390–3:2009. Testing hardened concrete Part 3: Compressive strength of test specimens. British Standards Online, 2009.
8. Bungey · 2006
9. Use of reclaimed asphalt pavement as aggregate in Portland cement concrete
10. EAPA and NAPA. The Asphalt Paving Industry: A Global Perspective, second ed., Global Series 101, 2011.
11. European Aggregates Association · 2012
12. The use of reclaimed asphalt pavement (RAP) aggregates in concrete. Waste Materials in Construction Wascon10.1016/S0713-2743(00)80024-0 ↗
13. Mechanical properties of concrete containing recycled asphalt pavements10.1680/macr.2006.58.5.313 ↗
14. Laboratory investigation of portland cement concrete containing recycled asphalt pavements10.1016/j.cemconres.2005.05.002 ↗
15. IAEA, International Atomic Energy Agency. Guidebook on non-destructive testing of concrete structures. IAEA–TCS–17, VIENNA: IAEA Austria, 2002.
16. Neville · 2003
17. OSHA: Occupational Safety & Health Administration. US Department of Labour. , 2012.
18. Concrete strength by combined non-destructive methods simply and reliably predicted10.1016/S0008-8846(00)00226-X ↗
19. J.M. Reid, J.W.E. Chandler, I. Schiavi, A.P. Hewitt, R. Griffiths, E. Bendall. Sustainable choice of materials for highway works: a guide for local authority highway engineers. Project PPR233 PPRO 04/37/04. TRL (HMSO), 2008.
20. Rebound surface hardness of concrete: Introduction of an empirical constitutive model10.1016/j.conbuildmat.2010.11.070 ↗