journal article·2017-09

An investigation into the influence of superabsorbent polymers on the properties of glass powder modified cement pastes

Mahsa Kamali, Ali Ghahremaninezhad

Publisher page

Abstract

Abstract This study examines superabsorbent polymer (SAP) absorption, mechanical strength, hydration, and electrical resistivity of glass powder modified cement pastes. The absorption of SAP was monitored using optical microscopy and shown to be higher when glass powders were used. Addition of SAP was found to improve hydration due to internal curing. The cement pastes with SAP exhibited a decreased compressive strength due to macrovoid formation. The glass powder modified cement pastes experienced a large reduction in electrical resistivity as a result of SAP addition; increased pore connectivity in these cement pastes is suggested as a possible cause of the reduction in electrical resistivity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (81)

Show source-provided references
1. Effects of fine LWA and SAP as internal water curing agents10.1007/s40069-014-0076-1 ↗
2. Water-entrained cement-based materials II. Experimental observations10.1016/S0008-8846(02)00737-8 ↗
3. K. Kovler, O.M. Jensen, Internal curing of concrete, state-of-the-art report of RILEM technical committee 196-ICC, 2007.
4. Relation between the molecular structure and the efficiency of superabsorbent polymers (SAP) as concrete admixture to mitigate autogenous shrinkage10.1016/j.cemconres.2012.03.011 ↗
5. P. Lura, O.M. Jensen, W.J. Weiss, Cracking in cement paste induced by autogenous shrinkage, (2009) 1089–1099.10.1617/s11527-008-9445-z ↗
6. A.B. Hossain, J. Weiss, Assessing residual stress development and stress relaxation in restrained concrete ring specimens, 26 (2004) 531–540.10.1016/S0958-9465(03)00069-6 ↗
7. V. Mechtcherine, M. Gorges, C. Schroefl, A. Assmann, Effect of internal curing by using superabsorbent polymers (SAP) on autogenous shrinkage and other properties of a high-performance fine-grained concrete: results of a RILEM round-robin test, (2014) 541–562.10.1617/s11527-013-0078-5 ↗
8. Shrinkage cracking of restrained concrete slabs
9. Protected paste volume in concrete Extension to internal curing using saturated lightweight fine aggregate10.1016/S0008-8846(99)00178-7 ↗
10. Water-entrained cement-based materials I. Principles and theoretical background10.1016/S0008-8846(01)00463-X ↗
11. Autogenous shrinkage in high-performance cement paste: an evaluation of basic mechanisms10.1016/S0008-8846(02)00890-6 ↗
12. Characterization of superabsorbent poly (sodium-acrylate acrylamide) hydrogels and influence of chemical structure on internally cured mortar10.1617/s11527-016-0823-7 ↗
13. A.M.S.M.L. Nehdi, Effect of drying conditions on autogenous shrinkage in ultra-high performance concrete at early-age, (2011) 879–899.10.1617/s11527-010-9670-0 ↗
14. Internal curing of high-performance concrete with pre-soaked fine lightweight aggregate for prevention of autogenous shrinkage cracking10.1016/j.cemconres.2008.02.001 ↗
15. Internal curing of engineered cementitious composites for prevention of early age autogenous shrinkage cracking10.1016/j.cemconres.2009.07.006 ↗
16. Prevention of autogenous shrinkage in high-strength concrete by internal curing using wet lightweight aggregates10.1016/S0008-8846(01)00608-1 ↗
17. Mechtcherine · 2012
18. The influence of superabsorbent polymers on strength and durability properties of blended cement mortars10.1016/j.cemconcomp.2014.03.008 ↗
19. Chloride migration in concrete with superabsorbent polymers10.1016/j.cemconcomp.2014.09.023 ↗
20. Effect of superabsorbent polymers (SAPs) on rheological properties of fresh cement-based mortars – development of yield stress and plastic viscosity over time10.1016/j.cemconres.2014.07.003 ↗
21. Effect of high amounts of superabsorbent polymers and additional water on the workability, microstructure and strength of mortars with a water-to-cement ratio of 0.5010.1016/j.conbuildmat.2014.09.012 ↗
22. P. Lura, F. Durand, A. Loukili, K. Kovler, Compressive strength of cement pastes and mortars with superabsorbent polymers, in: Int. RILEM Conf. Vol. Chang. Hardening Concr. Test. Mitig. 20–23 August, 2006, pp. 117–125.10.1617/2351580052.013 ↗
23. S. Igarashi, a Watanabe, O.M. Jensen, P. Lura, K. Kovler, Experimental study on prevention of autogenous deformation by internal curing using super-absorbent polymer particles, in: Int. RILEM Conf. Vol. Chang. Hardening Concr. Test. Mitig., (2006) 77–86.10.1617/2351580052.009 ↗
24. Use of superabsorbent polymers in construction materials
25. Effect of superabsorbent polymers on workability and hydration process in fly ash cementitious composites10.1061/(ASCE)MT.1943-5533.0001122 ↗
26. The effects of superabsorbent polymers on the microstructure of cementitious materials studied by means of sorption experiments10.1016/j.cemconres.2015.06.013 ↗
27. The effect of capillary on the desorption of hydrogels in a porous cementitious material
28. Interactions between superabsorbent polymers and cement-based composites incorporating colloidal silica nanoparticles10.1016/j.cemconcomp.2012.10.005 ↗
29. The mechanical strength, degree of hydration, and electrical resistivity of cement pastes modified with superabsorbent polymers10.1016/j.conbuildmat.2015.12.082 ↗
30. Combined effect of shrinkage reducing admixtures (SRA) and superabsorbent polymers (SAP) on the autogenous shrinkage and properties of cementitious materials10.1016/j.conbuildmat.2016.12.206 ↗
31. Supplementary cementitious materials10.1016/j.cemconres.2010.12.001 ↗
32. Influence of a fine glass powder on cement hydration: comparison to fly ash and modeling the degree of hydration10.1016/j.cemconres.2007.12.001 ↗
33. Investigating the hydration and microstructure of cement pastes modified with glass powders10.1016/j.conbuildmat.2016.02.085 ↗
34. Chloride transport in fly ash and glass powder modified concretes – influence of test methods on microstructure10.1016/j.cemconcomp.2009.11.010 ↗
35. Performance of glass powder as a pozzolanic material in concrete: a field trial on concrete slabs10.1016/j.cemconres.2005.12.012 ↗
36. P. Kara, Performance of waste glass powder (WGP) supplementary cementitious material (SCM) – drying shrinkage and early age shrinkage cracking, 66 (2014).10.14382/epitoanyag-jsbcm.2014.4 ↗
37. Value-added utilisation of waste glass in concrete10.1016/S0008-8846(03)00251-5 ↗
38. Influence of a fine glass powder on the durability characteristics of concrete and its comparison to fly ash10.1016/j.cemconcomp.2008.02.001 ↗
39. Fracture mechanics of ASR in concretes with waste glass particles of different sizes
40. Green and durable mortar produced with milled waste glass10.1680/macr.11.00082 ↗
41. Influence of different particle sizes on reactivity of finely ground glass as supplementary cementitious material (SCM)10.1016/j.cemconcomp.2014.10.004 ↗
42. Mirzahosseini · Effect of combined glass particles on hydration in cementitious systems · 2015 · 1
43. The role of residual cracks on alkali silica reactivity of recycled glass aggregates10.1016/j.cemconcomp.2011.07.004 ↗
44. Impact of alternative cementitious material on the mechanical and transfer properties of concrete
45. Studies on concrete containing ground waste glass10.1016/S0008-8846(99)00213-6 ↗
46. Strength and durability of recycled aggregate concrete containing milled glass as partial replacement for cement10.1016/j.conbuildmat.2011.10.061 ↗
47. Effect of glass powder on chloride ion transport and alkali-aggregate reaction expansion of lightweight aggregate concrete10.1007/s11595-009-2312-0 ↗
48. Effect of glass powders on the mechanical and durability properties of cementitious materials10.1016/j.conbuildmat.2015.06.010 ↗
49. J. Flores, M. Kamali, A. Ghahremaninezhad, Electrical resistivity measurement to study alkali-silica-reaction cracking in mortar, in: Proc. ASCE Forensic Eng., Miami, 2015, pp. 230–241.10.1061/9780784479711.023 ↗
50. Hydration in high-performance cementitious systems containing vitreous calcium aluminosilicate or silica fume10.1016/j.cemconres.2009.03.006 ↗
51. The effect of glass powder on the microstructure of ultra high performance concrete10.1016/j.conbuildmat.2014.05.101 ↗
52. Utilization of waste glass micro-particles in producing self-consolidating concrete mixtures10.1007/s40069-016-0141-z ↗
53. The influence of superabsorbent polymers on the autogenous shrinkage properties of cement pastes with supplementary cementitious materials10.1016/j.cemconres.2015.03.020 ↗
54. Effect of ionic crosslinking on the swelling and mechanical response of model superabsorbent polymer hydrogels for internally cured concrete
55. Osmotic swelling of polyacrylate hydrogels in physiological salt solutions10.1021/bm9905031 ↗
56. Behavior of superabsorbent polymers in calcium- and sodium-rich solutions
57. Hydration and properties of nano-TiO2 blended cement composites10.1016/j.cemconcomp.2012.02.009 ↗
58. Modification effects of colloidal nanoSiO2 on cement hydration and its gel property10.1016/j.compositesb.2012.05.056 ↗
59. Electrical conductivity based characterization of plain and coarse glass powder modified cement pastes10.1016/j.cemconcomp.2007.05.005 ↗
60. Effects of colloidal nanoSiO2 on fly ash hydration10.1016/j.cemconcomp.2012.06.013 ↗
61. Modification of cement-based materials with nanoparticles10.1016/j.cemconcomp.2012.06.012 ↗
62. Effects of sample preparation and interpretation of thermogravimetric curves on calcium hydroxide in hydrated pastes and mortars10.3141/2290-02 ↗
63. Effect of fly ash fineness on microstructure of blended cement paste10.1016/j.conbuildmat.2005.12.024 ↗
64. Effects of colloidal nanosilica on rheological and mechanical properties of fly ash-cement mortar10.1016/j.cemconcomp.2012.08.027 ↗
65. Effect of colloidal nano-silica on the mechanical and physical behaviour of waste-glass cement mortar10.1016/j.matdes.2011.07.008 ↗
66. Using impedance spectroscopy to assess the viability of the rapid chloride test for determining concrete conductivity10.6028/jres.105.040 ↗
67. N. Neithalath, J. Weiss, J. Olek, Predicting Permeability of Pervious Concrete (Enhansed Porosity Concrete) from Non-Destructive Electrical Measurements, (n.d.).
68. Characterizing enhanced porosity concrete using electrical impedance to predict acoustic and hydraulic performance10.1016/j.cemconres.2006.09.001 ↗
69. Estimating transport properties of mortars using image analysis on backscattered electron images10.1016/j.cemconres.2006.05.002 ↗
70. The ITZ microstructure, thickness and porosity in blended cementitious composite: effects of curing age, water to binder ratio and aggregate content10.1016/j.compositesb.2013.12.021 ↗
71. PH-sensitive superabsorbent polymers: a potential candidate material for self-healing concrete10.1007/s10853-014-8657-6 ↗
72. PH-responsive superabsorbent polymers: a pathway to self-healing of mortar10.1016/j.reactfunctpolym.2015.06.003 ↗
73. Influence of cement fineness and water-to-cement ratio on mortar early-age heat of hydration and set times10.1016/j.conbuildmat.2013.10.011 ↗
74. Hydration of cement with superabsorbent polymers10.1007/s10973-014-4133-4 ↗
75. Joint Committee on Powder Diffraction Standards, JCPDS-International center for diffraction data (2000), n.d.
76. Electrical impedance analysis based quantification of microstructural changes in concretes due to non-steady state chloride migration10.1016/j.matchemphys.2011.04.057 ↗
77. The influence of alkali content on the electrical resistivity and transport properties of cementitious materials10.1016/j.cemconcomp.2014.02.008 ↗
78. F. Rajabipour, C. Author, J. Weiss, Development of Electrical Conductivity-Based Sensors for Health Monitoring of Concrete Materials Development of Electrical Conductivity-Based Sensors for Health Monitoring of Concrete Materials, (2007) 1–16.
79. How does fly ash mitigate alkali–silica reaction (ASR) in accelerated mortar bar test (ASTM C1567)?10.1016/j.cemconcomp.2012.11.004 ↗
80. S.K. Wah, C. Co, M. Science, Effect of Pozzolanic Reaction Products on Alkali-silica Reaction, 21 (2006) 3–6.10.1007/BF02840910 ↗
81. Investigation of relations between porosity, pore structures, and Cl- diffusion of fly ash and blended cement pastes10.1016/0008-8846(86)90049-9 ↗