journal article·2017-11

Experimental and numerical assessment of in-plane monotonic response of ancient mortar brick masonry

Arash Rahgozar, Abdollah Hosseini

Publisher page

Abstract

Abstract The structural assessment of extant historical buildings constructed using ancient or traditional masonry is a critical research area for seismic retrofitting. In this study, the in-plane characteristics of the brick masonry of ancient mortars including mud, lime–mud, and lime–sand are investigated experimentally and numerically. For this purpose, several brick masonry prisms are constructed using these mortars. The brick and mortar properties are selected to match those of surviving heritage masonry buildings. Moreover, brick masonry prisms composed of cement and cement–lime (“bastard”) mortars are constructed for comparison. The in-plane responses of these masonry prisms are examined through compression, shear, and tension tests. Failure of brick masonry structure occurs frequently in mortar joints owing to its nonhomogeneous in-plane behavior. The experimental shear and tension responses of masonry joints are used to develop an appropriate contact behavior that can be used for modeling ancient masonry structure in Abaqus FEM software. The experimental tests on masonry prisms are modeled in the software, and the results of the analysis have exhibited reasonable accordance with those of the actual tests.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Masonry and Concrete Structural Analysis · Building materials and conservation · Seismic Performance and Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Church of San Giuliano di Puglia: seismic repair and upgrading10.1016/j.engfailanal.2013.05.023 ↗
2. Lourenco · 1996
3. Experimental characterization of stone masonry in shear and compression10.1016/j.conbuildmat.2009.06.045 ↗
4. Shear response of brick masonry small assemblages strengthened with bonded FRP laminates for in-plane reinforcement10.1016/j.conbuildmat.2010.01.005 ↗
5. Tests on the shear-bond behaviour in the bed-joints of masonry
6. Response of masonry bed joints in direct shear10.1061/(ASCE)0733-9445(1989)115:9(2276) ↗
7. CEN, TC125. · 2003
8. R. Van der Pluijm, Shear behaviour of bed joints, in: Proc. 6th North American masonry conf., Philadelphia, (1993) 125–36.
9. Characterization of cyclic behavior of dry masonry joints10.1061/(ASCE)0733-9445(2004)130:5(779) ↗
10. R.H. Atkinson, J.L. Noland, D.P. Abrams, S. McNary, A deformation failure theory for stack-bond masonry prisms in compression, in: Proceedings of 3rd North American Masonry Conference, Arlington, Texas (paper 18) 1985.
11. Stresses in a running bond brick masonry 3-D finite element model under axial compression
12. A.T. Vermeltfoort, Compression properties of masonry and its components, in: Proceedings of 10th international brick block masonry conference, Calgary, Canada, (1994) p. 1433–42.
13. A three-dimensional cyclic meso-scale numerical procedure for simulation of unreinforced masonry structures10.1016/j.compstruc.2013.01.012 ↗
14. The performance of unreinforced masonry walls subjected to low-velocity impacts: Finite element analysis10.1016/j.ijimpeng.2006.08.004 ↗
15. Oliveira · 2003
16. Implementation and validation of a constitutive model for the cyclic behaviour of interface elements10.1016/j.compstruc.2004.03.041 ↗
17. Finite element model for masonry10.1061/JSDEAG.0004969 ↗
18. Kebari · 2007
19. Khodabande · 1996
20. Pirnia · 2002
21. ASTM C67–02C · 2002
22. ASTM D2487–11 · 2011
23. ASTM C144–11 · 2011
24. ASTM C25–07 · 2007
25. ASTM 1314–03b · 2003
26. American Society of Civil Engineers, Prestandard and commentary for the seismic rehabilitation of buildings. FEMA-356. Washington D.C. (2000).
27. Uniaxial compressive stress-strain model for clay brick masonry
28. The biaxial compressive strength of brick masonry
29. Roca · 1998
30. ABAQUS, V. (2014). 6.14 documentation. Dassault Systemes Simulia Corporation.
31. Vd. Pluijm, Material properties of masonry and its components under tension and shear, in: S. Neis, V.V. Saskatchewan, (eds.), Proceedings of 6th Canadian masonry symposium, Canada (1992).
32. Shear behavior of bed joints
33. Stavridis · 2009