journal article·2017-11Open access

Width factor for externally bonded FRP-to-concrete joints

Jian-Ping Lin, Yu-Fei Wu, Scott T. Smith

Abstract

Abstract The width factor is an important parameter that describes the properties of an externally bonded reinforcing plate-to-concrete bonded interface. The factor, which reflects the variation of bond strength due to change of the width of concrete substrate for a certain width of plate, is commonly derived from plate-concrete joint tests (also known as pull tests) indirectly. There, however, exists inherent and significant scatter in the test results that can adversely influence the empirically derived width factor. In order to investigate the reliability of width factor models, this paper reports the details of a three-dimensional (3D) finite element model (FEM) that considers debonding as concrete material failure by incorporation of a concrete damage-plasticity theory. A detailed analysis of the width factor is conducted using the FEM, from which a new model for the width factor of externally bonded (EB) fibre reinforced polymer (FRP)-to-concrete joint is proposed. The width factor is found to be a function of not only the FRP plate and concrete widths but also concrete strength and plate rigidity. It is found that most of the existing width factor models may overestimate the width effect.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Teng · 2002
2. Defining anchor lengths of steel and CFRP plates bonded to concrete10.1016/S0143-7496(97)00018-3 ↗
3. Fatigue behaviour of CFRP strengthened steel plates with different degrees of damage10.1016/j.tws.2013.03.012 ↗
4. Flexural behavior of basalt FRP reinforced ECC and concrete beams10.1016/j.conbuildmat.2017.03.087 ↗
5. U. Neubauer, F.S. Rostasy, Design aspects of concrete structures strengthened with externally bonded CFRP-plates, in: Proceedings of the Seventh International Conference on Structural Faults and Repair, Volume 2: Concrete and Composites, 1997, pp. 109–118.
6. Anchorage strength models for FRP and steel plates bonded to concrete10.1061/(ASCE)0733-9445(2001)127:7(784) ↗
7. Development of the nonlinear bond stress–slip model of fiber reinforced plastics sheet–concrete interfaces with a simple method10.1061/(ASCE)1090-0268(2005)9:1(52) ↗
8. Bond–slip models for FRP sheets/plates bonded to concrete10.1016/j.engstruct.2005.01.014 ↗
9. Niedermeier · 2000
10. Investigation of bond between fiber reinforced polymer and concrete undergoing global mixed mode I/II loading
11. Quantification of bond-slip relationship for externally bonded FRP-to-concrete joints10.1061/(ASCE)CC.1943-5614.0000375 ↗
12. Unified analytical approaches for determining shear bond characteristics of FRP-concrete interfaces through pullout tests10.3151/jact.4.133 ↗
13. Analytical identification of bond–slip relationship of EB-FRP joints10.1016/j.compositesb.2012.01.048 ↗
14. Analytical modeling of the bond–slip relationship at FRP-concrete interfaces for adhesively-bonded joints10.1016/j.compositesb.2010.06.004 ↗
15. Interface bond between FRP sheets and concrete substrates: properties, numerical modeling and roles in member behaviour10.1002/pse.187 ↗
16. Effect of multiple secondary cracks on FRP debonding from the substrate of reinforced concrete beams10.1016/j.conbuildmat.2010.06.006 ↗
17. Bond-slip behaviour between self-compacting concrete and carbon-fibre-reinforced polymer sheets10.1680/macr.14.00150 ↗
18. Flexural and interfacial behavior of FRP-strengthened reinforced concrete beams10.1061/(ASCE)1090-0268(2007)11:6(629) ↗
19. Anchorage design for externally bonded carbon fiber reinforced polymer laminates
20. Finite element simulation of debonding in FRP-to-concrete bonded joints10.1016/j.conbuildmat.2005.01.033 ↗
21. Meso-scale finite element model for FRP sheets/plates bonded to concrete10.1016/j.engstruct.2004.11.015 ↗
22. G. Monti, M. Renzelli, P. Luciani, FRP adhesion in uncracked and cracked concrete zones, in: Proc. of 6th International Symposium on FRP Reinforcement for Concrete Structures, Singapore, 2003, pp. 163–172.10.1142/9789812704863_0015 ↗
23. Bond failure of concrete fiber reinforced polymer plates at inclined cracks experiments and fracture mechanics model
24. Concrete damage plasticity model for modeling FRP-to-concrete bond behavior10.1061/(ASCE)CC.1943-5614.0000482 ↗
25. Prediction of interfacial bond failure of FRP-concrete surface10.1061/(ASCE)1090-0268(2007)11:4(427) ↗
26. Experimental study on FRP-to-concrete bonded joints10.1016/j.compositesb.2004.06.001 ↗
27. Fracture analysis of FRP-plated notched concrete beams subjected to three-point bending
28. Finite element analysis of initially damaged beams repaired with FRP plates10.1016/j.compstruct.2015.07.124 ↗
29. Fédération Internationale du Béton (FIB), Externally Bonded FRPreinforcement for RC Structures, Bulletin 14, Lausanne, Switzerland, 2001.
30. Holzenkämpfer · 1994
31. An understanding of the width effect in FRP-concrete debonding10.1111/j.1475-1305.2008.00481.x ↗
32. Width effect in the interface fracture during shear debonding of FRP sheets from concrete10.1016/j.engfracmech.2006.09.002 ↗
33. Three dimensional stress distribution in FRP-to-concrete bond test specimens10.1016/j.conbuildmat.2005.06.037 ↗
34. Three-dimensional modelling of bond behaviour between concrete and FRP reinforcement10.1108/02644401111096993 ↗
35. Finite element analysis of width effect in interface debonding of FRP plate bonded to concrete10.1016/j.finel.2014.08.009 ↗
36. Finite-element modeling of intermediate crack debonding in FRP-plated RC beams10.1061/(ASCE)CC.1943-5614.0000157 ↗
37. Explicit finite element modeling of static crack propagation in reinforced concrete10.1007/s10704-006-9002-0 ↗
38. On the finite element modelling of RC beams shear-strengthened with FRP10.1016/j.conbuildmat.2010.11.101 ↗
39. Finite element modeling of debonding failures in FRP-strengthened RC beams: a dynamic approach10.1016/j.compstruc.2015.05.023 ↗
40. A framework of elastic–plastic damaging model for concrete under multiaxial stress states10.1016/j.ijplas.2006.03.011 ↗
41. Finite element modeling of confined concrete-II: plastic-damage model10.1016/j.engstruct.2009.11.013 ↗
42. ABAQUS, User's Manual 6.10, Providence, RI, Dassault Systèmes Simulia, USA, 2010.
43. A plastic-damage model for concrete10.1016/0020-7683(89)90050-4 ↗
44. Plastic-damage model for cyclic loading of concrete structures
45. Discussion of equation for the stress-strain curve of concrete by Desayi and Krishnan
46. Chen · 1982
47. American Concrete Institute · 2008
48. Hordijk · 1991
49. CEB-FIP · 1993
50. Analysis of concrete beams reinforced with externally bonded woven composite fabrics10.1016/1359-8368(95)00017-8 ↗
51. Effect of predamage on the stress-strain relationship of confined concrete under monotonic loading10.1061/(ASCE)ST.1943-541X.0001015 ↗
52. Experimental investigation and fracture analysis of debonding between concrete and FRP sheets
53. Experimental study on bond behavior between concrete and FRP reinforcement10.1061/(ASCE)1090-0268(2008)12:2(180) ↗