Laboratory evaluation of electromagnetic density gauges for hot-mix asphalt mixture density measurement
Source abstract
Abstract
Abstract This paper presents a laboratory study aiming to evaluate the performance of electromagnetic (EM) density gauges as a non-destructive tool for hot mix asphalt (HMA) density measurement. In total, 36 HMA testing slabs with different compositions were prepared in laboratory. EM density gauge data were collected from these slabs using two common types of gauges, i.e., PQI 301 and PaveTracker 2701B, and compared with their bulk densities measured by the standard saturated surface dry (SSD) method. It was found that measurement direction, asphalt binder content, mixture air void content, and thickness of the testing slabs do not affect the accuracy of the EM density gauges. However, EM density gauge measurements are affected by the presence of moisture, gradation of asphalt mixture and gauge calibration method. It was also concluded that the accuracy of PaveTracker with mix calibration is comparable to that of the conventional standard method.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geophysical Methods and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Development and validation for in situ asphalt mixture density prediction models10.1016/j.ndteint.2011.03.002 ↗
2. Investigation on fatigue damage of asphalt mixture with different air-voids using microstructural analysis10.1016/j.conbuildmat.2016.08.138 ↗
3. A micromechanical model to evaluate the impact of air void content and connectivity in the oxidation of asphalt mixtures10.1016/j.conbuildmat.2014.03.013 ↗
4. Effect of asphalt film thickness on short-and long-term aging of asphalt paving mixtures10.1177/0361198196153500111 ↗
5. Moisture characteristics of mixtures with warm mix asphalt technologies–a review10.1016/j.conbuildmat.2017.03.069 ↗
6. Effect of compaction temperature on rutting and moisture resistance of foamed warm-mix-asphalt mixtures10.1061/(ASCE)MT.1943-5533.0000664 ↗
7. Influence of air void content on moisture damage susceptibility of asphalt mixtures: computational study10.3141/2446-02 ↗
8. Quality characteristics for use with performance related specifications for hot mix asphalt
9. Prediction of field aging gradient in asphalt pavements10.3141/2507-03 ↗
10. Field application of ground-penetrating radar for measurement of asphalt mixture density: case study of illinois route 72 overlay10.3141/2304-15 ↗
11. Williams · 2008
12. IAEA, Manual on Nuclear Gauges, 1996, Vienna.
13. P. Romero, Evaluation of non-nuclear gauges to measure density of hot-mix asphalt pavements. Pooled Fund Study Final Report, The University of Utah, Department of Civil and Environmental Engineering, 2002.
14. Troxler Electronic Laboratories Inc., Manual of Operation and Instruction 2012, NC, USA.
15. An innovative method for measuring pavement dielectric constant using the extended CMP method with two air-coupled GPR systems10.1016/j.ndteint.2014.05.002 ↗
16. Railroad ballast evaluation using ground-penetrating radar: laboratory investigation and field validation10.3141/2159-14 ↗
17. Evaluation of new nonnuclear pavement density gauges with data from field projects10.3141/1813-06 ↗
18. D.L. Allen, D. B. Schultz Jr, D.A. Willett, Evaluation of non-nuclear density gauges, 2003.
19. Z. Zhuang, Effectiveness Study of Non-nuclear Gauge for Hot mix Asphalt (hma) Pavement Construction, 2011.
20. S. Sebesta, M. Zeig, T. Scullion, Evaluation of non-nuclear density gauges for HMAC: Year 1 report. 2003, Texas Transportation Institute, Texas A & M University System.
21. A. Timm, et al. Evaluation of Non-nuclear density gauges for measuring in-place density of hot mix asphalt. in: Transportation Research Board 92nd Annual Meeting, 2013.
22. Evaluating nonnuclear measurement devices to determine in-place pavement density10.3141/1900-07 ↗
23. J.W. Henault, Field evaluation of a non-nuclear density pavement quality indicator, 2001.
24. M. Rose, H. Wen, S. Sharma, Evaluation of non-nuclear-density gauges for measuring in-place density of soils and base materials, in: Transportation Research Board 93rd Annual Meeting, 2014.
25. TransTech Systems Inc., Pavement Quality Indictor Model 301 Operator's Handbook, 2003.
26. Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures, 2014.