Behavior of ring-restrained high-performance concrete under extreme heating and development of screening test
Source abstract
Abstract
Abstract This study evaluated the behavior of restrained high-performance concrete in response to the extreme heating associated with fire. This was done by estimating the thermal stress based on the strain induced in the restraining steel ring and the vapor pressure in the restrained concrete under the conditions corresponding to the RABT 30 rapid heating curve. The thermal stress was calculated based on the thin-wall cylinder model theory. A spalling failure model based on a tensile strain failure model was proposed. The results indicated that the model was suitable for determining the spalling initiation point as well as the spalling depth.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fire effects on concrete materials · Concrete Properties and Behavior · Engineering and Material Science Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Analysis of pore pressure, thermal stress and fracture in rapidly heated concrete
2. Spalling phenomena in HPC and OC
3. Spalling and pore pressure in HPC at high temperatures10.1016/S0008-8846(00)00384-7 ↗
4. Pore pressure development in hybrid fibre-reinforced high strength concrete at elevated temperatures10.1016/j.cemconres.2011.07.001 ↗
5. Temperature, pore pressure and mass variation of concrete subjected to high temperature—experimental and numerical discussion on spalling risk10.1016/j.cemconres.2009.10.011 ↗
6. Effect of fibre type and geometry on maximum pore pressures in fibre-reinforced high strength concrete at elevated temperatures10.1016/j.cemconres.2011.11.014 ↗
7. Combining polypropylene and nylon fibres to optimize fibre addition for spalling protection of high-strength concrete10.1016/j.conbuildmat.2012.02.015 ↗
8. A study on the effects of high temperature on mechanical properties of fibre reinforced cementitious composites10.1016/j.compositesb.2011.10.005 ↗
9. Contribution of cocktail of polypropylene and steel fibres in improving the behaviour of high strength concrete subjected to high temperature10.1016/j.conbuildmat.2010.11.064 ↗
10. On residual strength of high-performance concrete with and without polypropylene fibres at elevated temperatures10.1016/j.firesaf.2005.11.004 ↗
11. Mix proportion and properties of fire-resistant wet-mixed high-strength polypropylene fibre-reinforced sprayed polymer cement composites10.1016/j.compstruct.2009.09.022 ↗
12. Relationship between inter-aggregate spacing and the optimum fibre length for spalling protection of concrete in fire10.1016/j.cemconres.2011.12.002 ↗
13. Combining polypropylene and nylon fibers to optimize fiber addition for spalling protection of high-strength concrete10.1016/j.conbuildmat.2012.02.015 ↗
14. High-temperature behavior of HPC with polypropylene fibres from spalling to microstructure10.1016/S0008-8846(01)00596-8 ↗
15. Modelling of heated concrete10.1680/macr.2002.54.2.77 ↗
16. Optimization of the type and amount of polypropylene fibres for preventing the spalling of lightweight concrete subjected to hydrocarbon fire10.1016/S0958-9465(03)00085-4 ↗
17. Effect of short fibres on residual permeability and mechanical properties of hybrid fibre reinforced high strength concrete after heat exposition10.1016/j.cemconres.2006.05.006 ↗
18. Polypropylene fibres in heated concrete Part 2: pressure relief mechanisms and modelling criteria10.1680/macr.2007.00042 ↗
19. Polypropylene fibres in heated concrete. Part 1: molecular structure and materials behavior10.1680/macr.2008.60.2.125 ↗
20. Pore pressure and explosive spalling in concrete10.1617/s11527-008-9353-2 ↗
21. The influence of pressure in the pore system on fire spalling of concrete10.1007/s10694-009-0093-9 ↗
22. Reduction of fire spalling in high-performance concrete by means of superabsorbent polymers and polypropylene fibers small scale fire tests of carbon fiber reinforced plastic-prestressed self-compacting concrete10.1016/j.cemconcomp.2014.02.001 ↗
23. Moisture transport in heated concrete, as studied by NMR, and its consequences for fire spalling10.1016/j.cemconres.2007.03.004 ↗
24. Study of mechanisms of explosive spalling in high-strength concrete at high temperatures using acoustic emission10.1016/j.conbuildmat.2012.06.070 ↗
25. A meso-level investigation into the explosive spalling mechanism of high-performance concrete under fire exposure10.1016/j.cemconres.2014.07.010 ↗
26. On the thermal spalling mechanism of reactive powder concrete exposed to high temperature: numerical and experimental studies10.1016/j.ijheatmasstransfer.2016.03.033 ↗
27. Model-based risk assessment of concrete spalling in tunnel linings under fire loading10.1016/j.engstruct.2014.02.033 ↗
28. A numerical investigation of the influence of pore pressures and thermally induced stresses for spalling of concrete exposed to elevated temperatures10.1016/j.firesaf.2013.03.019 ↗
29. An approach for modelling concrete spalling in finite strains10.1016/j.matcom.2009.05.011 ↗
30. Hygro-thermo-mechanical analysis of spalling in concrete walls at high temperatures as a moving boundary problem10.1016/j.ijheatmasstransfer.2015.01.050 ↗
31. Effect of coarse aggregate type and loading level on the high temperature properties of concrete10.1016/j.conbuildmat.2014.12.096 ↗
32. Evaluation of the mechanical properties of 200 MPa ultra-high-strength concrete at elevated temperatures and residual strength of column10.1016/j.conbuildmat.2015.03.074 ↗
33. Assessment of concrete susceptibility to fire spalling: a report on the state-of-the-art in testing procedures10.1016/j.proeng.2015.06.149 ↗
34. R. Connolly, The Spalling of Concrete in Fires, (PhD Thesis), The University of Aston in Birmingham, 1995.
35. Test method for spalling of fire exposed concrete10.1016/j.firesaf.2005.04.001 ↗
36. An experimental method for assessing the spalling sensitivity of concrete mixture submitted to high temperature10.1016/j.cemconcomp.2012.04.002 ↗
37. A new test method to study the influence of pore pressure on fracture behaviour of concrete during heating10.1016/j.cemconres.2017.01.002 ↗
38. Steel ring-based restraint of HPC explosive spalling in high temperature environments10.1260/2040-2317.5.3.239 ↗
39. Jansson · 2017 · 301
40. Ozawa · 2017 · 315
41. Timoshenko · 1959
42. Architectural Institute of Japan: Guidebook for fire-resistive performance of structural materials, 2017 (In Japanese).
43. Strain behaviour of compression concrete at high temperature
44. Compressive strength of confined concrete at high temperature