journal article·2018-02

New failure criterion models for concrete under multiaxial stress in compression

Chong Rong, Qingxuan Shi, Ting Zhang, Hongchao Zhao

Publisher page

Abstract

Abstract Biaxial and triaxial compression tests were performed on 100 × 100 ×100 mm cubic specimens of concrete under different stress loading rates. All the tests were performed using a true triaxial testing machine. The analysis of the data revealed that the intermediate principal stress, hydrostatic stress and shear stress are the main factors influencing the failure criterion for concrete under multiaxial stress. Based on the twin shear strength theory, three failure criterion models were developed. The five-parameter model A considers the shear strength as the main factor, the five-parameter model B considers hydrostatic strength as the main factor, and the six-parameter model considers both the shear strength and hydrostatic strength. The parameters for these failure criterion models have clear physical significance and form the failure criterion in a theoretical analysis. Models A and B apply to different stress states and show similar results. The six-parameter model can apply to most stress states, but the computed results depend on the boundary conditions. This convenient model can also be extended for nonlinear analyses of concrete under multiaxial stress in compression.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Geotechnical Engineering and Underground Structures · Rock Mechanics and Modeling · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Repair of corroded and buckled short steel columns using concrete-filled GFRP jackets10.1016/j.conbuildmat.2015.06.040 ↗
2. A density-dependent failure criterion for concrete10.1016/j.conbuildmat.2016.07.119 ↗
3. Behaviour of asphalt concrete mixtures under tri-axial compression10.1016/j.conbuildmat.2015.12.036 ↗
4. Influence of high strain rates on stress–strain relationship, strength and elastic modulus of concrete10.1016/j.cemconcomp.2007.10.001 ↗
5. Influence of initial static stress on the dynamic properties of concrete10.1016/j.cemconcomp.2007.11.004 ↗
6. Behavior of concrete in water subjected to dynamic triaxial compression
7. Compressive behavior of concrete-filled FRP tube columns: assessment of critical column parameters10.1016/j.engstruct.2013.01.017 ↗
8. Experimental study of ultra-high-strength concrete under triaxial compression
9. Influence of free water content on the compressive mechanical behaviour of cement mortar under high strain rate10.1007/s12046-011-0024-6 ↗
10. Creep strain versus residual strain of a concrete loaded under various levels of compressive stress10.1016/j.cemconres.2013.04.005 ↗
11. Rate effect of concrete strength under initial static loading10.1016/j.engfracmech.2006.11.012 ↗
12. Experimental study of large-sized concrete filled steel tube columns under blast load10.1016/j.conbuildmat.2016.12.096 ↗
13. Study on concrete in macro-and meso-scale mechanical properties based on homogenization theory
14. Numerical study on the influence of mesomechanical properties on macroscopic fracture of concrete10.12989/sem.2005.19.5.519 ↗
15. Meso-level numerical simulation on mechanical properties of modeled recycled concrete under uniaxial compression
16. Relationship between pore structure and mechanical properties of ordinary concrete under bending fatigue10.1016/S0008-8846(98)00037-4 ↗
17. Anisotropic masonry failure criterion using artificial neural networks10.1007/s00521-016-2181-3 ↗
18. Masonry failure criterion under biaxial stress state
19. Dynamic biaxial tensile-compressive strength and failure criterion of plain concrete10.1016/j.conbuildmat.2012.11.012 ↗
20. A Lateral strain plasticity model for FRP confined concrete10.1016/j.compstruct.2016.09.028 ↗
21. Modeling of masonry failure surface under biaxial compressive stress using Neural Networks10.1016/j.conbuildmat.2014.01.041 ↗
22. Yu · 2011
23. Triaxial failure criterion for concrete and its generalization