journal article·2018-05

Effect of Phosphate-based inhibitor on prestressing tendons corrosion in simulated concrete pore solution contaminated by chloride ions

H. Ben Mansour, L. Dhouibi, H. Idrissi

Publisher page

Abstract

Abstract Corrosion of prestressed concrete tendons is a huge problem that must be addressed since it can cause serious damages. This corrosion involves the synergetic effect of applied stress and aggressive environment which accelerate the material damage. The purpose of this research is to evaluate the efficiency of phosphate-based inhibitor Na3PO4·12H2O against prestressed steel corrosion in chloride contaminated concrete pore solution under stress conditions. Emphasis is placed on the effect of this inhibitor on the critical [Cl−]/[OH−] ratio for prestressing tendons corrosion initiation. The study was carried out using electrochemical techniques and Acoustic Emission (AE). Then samples surfaces were observed by Optical Microscope (MO) and analyzed by Energy Dispersive X-ray Spectroscopy (EDX). The obtained results indicate on one hand that the mechanical stress decreases the value of the critical [Cl−]/[OH−] ratio. On the other hand the incorporation of trisodium phosphate inhibitor (TSP) enhances the critical [Cl−]/[OH−] ratio and increases both of Epit and Ecor values for a given ratio which suggests an anodic protection mechanism of the inhibitor. Acoustic emission evolution recorded along with the anodic polarization revealed a longer period of time for inducing the damage of the specimen when inhibitor is added. EDX analysis showed that phosphate ions are likely to form compounds that block anodic sites which help to delay prestressed steel corrosion initiation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. N Krishna Raju, Prestressed Concrete, 4th edition, McGraw-Hill, New Delhi, 2006.
2. Benaim · 2008
3. Hewson · 2003
4. D. Whiting, B. Stejskal, M. Nagi, Condition of Prestressed Concrete Bridge Components: Technology Review and Field Survey, Office of Engineering and Highway Operation Research and Development, Federal Highway Administration, Publication No. FHWA-RD-93-037, September 1993.
5. Chloride-induced corrosion on reinforcing steel: from the fundamentals to the monitoring techniques10.1016/S0958-9465(02)00089-6 ↗
6. Durability of steel reinforced concrete in chloride environments: an overview10.1016/j.conbuildmat.2011.12.038 ↗
7. Electrochemical behaviour of steel in mortar and in simulated pore solutions: analogies and differences10.1016/j.cemconres.2016.07.007 ↗
8. Carbon steel passivity examined in solutions with a low degree of carbonation: the effect of chloride and nitrite ions10.1016/j.matchemphys.2008.12.007 ↗
9. Corrosion of reinforcing steel in simulated concrete pore solutions effect of carbonation and chloride content10.1016/j.corsci.2004.03.013 ↗
10. Concrete carbonation tests in natural and accelerated conditions10.1680/adcr.2003.15.4.171 ↗
11. Critical chloride content in reinforced concrete–a review10.1016/j.cemconres.2009.08.006 ↗
12. Chloride threshold values to depassivate reinforcing bars embedded in a standardized OPC mortar10.1016/S0008-8846(00)00265-9 ↗
13. Chloride threshold level for corrosion of steel in concrete10.1016/j.corsci.2007.05.007 ↗
14. A study on chloride-induced depassivation of mild steel in simulated concrete pore solution10.1016/S0008-8846(02)00895-5 ↗
15. Influence of CaCl2 and NaCl from different sources on chloride threshold value for the corrosion of steel reinforcement in concrete10.1016/j.conbuildmat.2010.07.023 ↗
16. Initial corrosion presented by chloride threshold penetration of concrete up to 10 year-results under marine site10.1016/j.conbuildmat.2012.07.061 ↗
17. Detection and identification of concrete cracking during corrosion of reinforced concrete by acoustic emission coupled to the electrochemical techniques10.1016/j.ndteint.2005.04.007 ↗
18. AM. Peek, M.G. Ali, W.K. Green, A review of concrete corrosion inhibitors, Australasian Corrosion Association Conference, paper 39-013, Sidney, 1999.
19. Corrosion inhibitors and other protective systems in concrete repair: concepts or misconcepts10.1016/S0958-9465(03)00044-1 ↗
20. Gaidis Chemistry of corrosion inhibitors10.1016/S0958-9465(03)00037-4 ↗
21. Corrosion inhibitors for steel in concrete: state-of-the-art report10.1016/j.conbuildmat.2006.10.013 ↗
22. Environmental factors affecting the corrosion behavior of reinforcing steel. IV. Variation in the pitting corrosion current in relation to the concentration of the aggressive and the inhibitive anions10.1016/j.corsci.2010.01.021 ↗
23. Electrochemical behaviour of amino alcohol-based inhibitors used to control corrosion of reinforcing steel10.1016/j.electacta.2004.01.041 ↗
24. Synergistic inhibition effect of sodium tungstate and hexamethylene tetramine on reinforcing steel corrosion10.1149/2.0641510jes ↗
25. Inhibitor evaluation in different simulated concrete pore solution for the protection of steel rebars10.1016/j.conbuildmat.2016.07.115 ↗
26. The inhibition effects of several inhibitors on rebar in acidified concrete pore solution10.1016/j.conbuildmat.2011.08.048 ↗
27. Influences of phosphate tailings on hydration and properties of Portland cement10.1016/j.conbuildmat.2015.08.115 ↗
28. Effect of phosphate based inhibitor on the threshold chloride to initiate steel corrosion in saturated hydroxide solution10.1016/j.conbuildmat.2013.08.054 ↗
29. Corrosion protection of steel reinforcement by a pretreatment in phosphate solutions: Assessment of passivity by electrochemical techniques10.1179/174327806X120775 ↗
30. Effects of phosphate species on localised corrosion of steel in NaHCO3 + NaCl electrolytes10.1016/j.electacta.2009.03.014 ↗
31. Effects of phosphate on the chloride-induced corrosion behavior of reinforcing steel in mortars10.1016/j.cemconcomp.2013.10.002 ↗
32. Effectiveness of pretreatment method to hinder rebar corrosion in concrete10.1179/147842208X386313 ↗
33. Electrochemical and analytical characterization of three corrosion inhibitors of steel in simulated concrete pore solutions10.1007/s12613-012-0512-7 ↗
34. Influence of phosphate on corrosion products of iron in chloride-polluted-concrete- simulating solutions: ferrihydrite vs green rust10.5006/1.3277637 ↗
35. Corrosion inhibition of carbon steel in alkaline chloride media by Na3PO410.1016/j.electacta.2007.03.003 ↗
36. Phosphate ions as corrosion inhibitors for reinforcement steel inchloride-rich environments10.1016/j.electacta.2013.03.180 ↗
37. Phosphate ions as effective inhibitors for carbon steel in carbonated solutions contaminated with chloride ions10.1016/j.electacta.2015.10.167 ↗
38. Effect of Na3PO4 addition in mortar on steel reinforcement corrosion behavior in 3% NaCl solution10.1016/j.conbuildmat.2014.12.099 ↗
39. Comparative study of three sodium phosphates as corrosion inhibitors for steel reinforcements10.1016/j.cemconcomp.2013.06.005 ↗
40. Corrosion inhibition mechanism of phosphates for early-age reinforced mortar in the presence of chlorides10.1016/j.cemconcomp.2015.04.009 ↗
41. Testing phosphate ions as corrosion inhibitors for construction steel in mortars10.1016/j.electacta.2015.12.124 ↗
42. Corrosion propagation of prestressing steel strands in concrete subject to chloride attack10.1016/j.conbuildmat.2011.04.011 ↗
43. Detection of stress corrosion cracking of high-strength steel used in prestressed concrete structures by acoustic emission technique10.1016/j.apsusc.2007.09.011 ↗
44. Hydrogen embrittlement of prestressing cables10.1016/j.corsci.2010.02.041 ↗
45. Assessment of the stress corrosion cracking in a chloride medium of cables used in prestressed concrete structures by the acoustic emission technique10.1088/0957-0233/19/11/115702 ↗
46. Effect of new corrosion inhibitor on electrochemical behavior of prestressed steel wire in simulated concrete pore solution
47. Acoustic emission vis-à-vis electrochemical techniques for corrosion monitoring of reinforced concrete element10.1016/j.conbuildmat.2014.06.068 ↗
48. Environmentalfactors affecting the corrosion behaviour of reinforcing steel III. Measurementof pittingcorrosion currents of steel in Ca(OH)2 solutions under naturalcorrosion conditions10.1016/j.corsci.2009.04.006 ↗
49. Ellipsometric study of the formation of films on iron in orthosphosphate solutions10.1149/1.2401696 ↗
50. The degradation of passive film on carbon steel in concrete pore solution under compressive and tensile stresses10.1016/j.electacta.2011.09.035 ↗
51. Study on the corrosion behavior of reinforcing steel in simulated concrete pore solutions using in situ Raman spectroscopy assisted by electrochemical techniques10.1016/j.electacta.2010.05.003 ↗
52. Localized corrosion behaviour of reinforcement steel in simulated concrete pore solution10.1016/j.corsci.2009.05.044 ↗
53. Corrosion behavior of steel submitted to chloride and sulphate ions in simulated concrete pore solution10.1016/j.conbuildmat.2016.03.213 ↗
54. Brug · J. Electroanal. Chem. · 1984 · 176 · 27510.1016/S0022-0728(84)80324-1 ↗
55. Electrochemical study of corrosion inhibition of steelreinforcement in alkaline solutions containing phosphates based components10.1007/s10853-006-0880-3 ↗