Linear polyesters as effective corrosion inhibitors for steel rebars in chloride induced alkaline medium – An electrochemical approach
Source abstract
Abstract
Abstract As a motto of framing the strategies to minimise the deterioration in steel reinforced concrete structures as well as the fact that the work carried out with polymers are rare and scanty, polyesters namely Poly (Glycerol azealate) (PGAZ) and 4-(1-(4-methoxy phenyl) cyclo hexyl)phenyl 9-oxodecanoate (MPOD) were synthesised and evaluated for rebar corrosion in simulated concrete pore solution (SCP) for the first time at selected concentrations of 10, 100, 1000 ppm levels with an aid of electrochemical impedance and potentiodynamic polarisation techniques. Nyquist plots favoured increased Rct values suggesting the formation of barrier. Tafel plots represented cathodic inhibition. The experimental datas were best fitted with Langmuir adsorption isotherm facilitating monolayer adsorption. Both the methods employed were in good agreement with each other favouring maximum inhibition efficiency of 71.81% for MPOD and minimum of 57.64% for PGAZ primarily due the difference in aromatic sites as revealed in mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Reduction of corrosion process in steel bars using inhibitors10.1016/S1452-3981(23)19496-X ↗
2. Non-uniform corrosion states of rebar in concrete under chloride environment10.1016/j.corsci.2015.01.031 ↗
3. Corrosion behaviour of steel reinforcement in concrete with recycled aggregates, fly ash and spent cracking catalyst10.3390/ma7043176 ↗
4. Determining corrosion levels in the reinforcement rebars of buildings in coastal areas. a case study in the Mediterranean coastline10.1016/j.conbuildmat.2015.09.059 ↗
5. Inhibitor evaluation in different simulated concrete pore solution for the protection of steel rebars10.1016/j.conbuildmat.2016.07.115 ↗
6. Characterization of corrosion process of Q235 carbon steel in simulated concrete pore solution by EIS and EN techniques10.1016/S1452-3981(23)10910-2 ↗
7. Electrochemical behaviour of mild steel in concrete: influence of pH and carbonate content of concrete pore solution10.1016/j.electacta.2005.04.014 ↗
8. The electrochemical behaviour of steel rebars in concrete: an electrochemical impedance spectroscopy study of the effect of temperature10.1016/j.electacta.2013.12.012 ↗
9. Effect of chloride and conjoint chloride–sulfate ions on corrosion of reinforcing steel in electrolytic concrete powder solution (ECPS)10.1016/j.conbuildmat.2015.10.028 ↗
10. Finite element modeling of coupled heat transfer, moisture transport and carbonation process in concrete structures10.1016/S0958-9465(02)00125-7 ↗
11. Effect of using corrosion inhibitors on concrete properties and their activity
12. Corrosion monitoring of reinforced concrete structures – a review10.1016/S1452-3981(23)17049-0 ↗
13. Effects of AC-interference on chloride-induced corrosion of reinforced concrete10.1016/j.conbuildmat.2017.01.087 ↗
14. The micro-solution electrochemical method to evaluate rebar corrosion in reinforced concrete structures10.1016/j.conbuildmat.2017.06.003 ↗
15. Corrosion protection of galvanized rebars in ternary binder concrete exposed to chloride penetration10.1016/j.conbuildmat.2017.09.002 ↗
16. Deoxyribonucleic acid as an inhibitor for chloride-induced corrosion of reinforcing steel in simulated concrete pore solutions10.1016/j.conbuildmat.2017.05.157 ↗
17. Effect of LiNO2 inhibitor on corrosion characteristics of steel rebar in saturated Ca(OH)2 solution containing NaCl: an electrochemical study10.1016/j.conbuildmat.2016.12.086 ↗
18. Corrosion inhibition, adsorption and thermodynamic properties of poly(vinyl alcoholcysteine) in molar HCl10.1016/j.arabjc.2014.01.016 ↗
19. Synthesis, characterization and properties of a bio-based poly(glycerol azelate) polyester10.1016/j.matchemphys.2016.04.059 ↗
20. Synthesis and characterization of new aromatic polyesters containing cardo decahydronaphthalene groups10.1016/j.eurpolymj.2009.12.028 ↗
21. Synthesis and characterization of wholly aromatic polyesters using interfacial polycondensation technique
22. The passive film growth mechanism of new corrosion-resistant steel rebar in simulated concrete pore solution: nanometer structure and electrochemical study10.3390/ma10040412 ↗
23. Synthesis, characterisation and corrosion behaviour of isomers of conducting poly-toluidine on mild steel in acid medium
24. N-[Morpholin–4-yl (phenyl) methyl] acetamide as corrosion inhibitor for mild steel in hydrochloric acid medium10.1016/j.arabjc.2011.07.024 ↗
25. Studies on the inhibition of mild steel corrosion in hydrochloric acid solution by atenolol drug10.1016/j.ejpe.2015.04.003 ↗
26. Synthesis, spectral and thermal characterization of polyester derived from 1,1-bis(4-hydroxy phenyl)cyclohexane10.1177/0954008313501181 ↗
27. Glass transition temperature-basics and application in pharmaceutical sector10.4103/0973-8398.55043 ↗
28. Steel corrosion assessment by electrochemical impedance on metakaolin blended mortars10.1590/S1516-14392013005000178 ↗
29. Corrosion inhibition of low carbon steel by Strychnos nux-vomica extract as green corrosion inhibitor in hydrochloric acid solution10.20964/2016.10.22 ↗
30. Evaluation of corrosion resistance properties of N, N’-Dimethyl ethanolamine corrosion inhibitor in saturated Ca(OH)2 solution with different concentrations of chloride ions by electrochemical experiments10.1016/j.conbuildmat.2016.03.174 ↗
31. Effect of temperature on adsorption and corrosion inhibition characteristics of gelatin on mild steel in hydrochloric acid medium10.1007/s11164-015-2295-8 ↗
32. Alcamines as corrosion inhibitors for reinforced steel and their effect on cement based materials and mortar performance10.1039/C5RA00717H ↗
33. Inhibition of carbon steel in acidic solution using some newly polyester derivatives10.1016/j.molliq.2015.08.033 ↗
34. A comparative study on corrosion behaviour of rebar in concrete with fatty acid additive as phase change material10.1016/j.conbuildmat.2017.03.165 ↗
35. Electrochemical and XPS study on effect of Cl− on corrosion behavior of reinforcing steel in simulated concrete pore solutions10.1016/S1452-3981(23)13306-2 ↗
36. Effect of organic inhibitors on chloride corrosion of steel rebars in alkaline pore solution10.1155/2015/521507 ↗
37. Electrochemical investigations on the performance of newly synthesized azomethine polyester on rebar corrosion10.1002/maco.201307472 ↗
38. Studies on the performance of migratory corrosion inhibitors in protection of rebar concrete in Gulf seawater environment10.1016/S0958-9465(03)00042-8 ↗
39. Aryl aminoalcohols as corrosion inhibitors for carbon steel in chloride-contaminated simulated concrete pore solution10.1016/S1452-3981(23)15911-6 ↗
40. Inhibition activity of new thiazole hydrazones towards mild steel corrosion in acid media by thermodynamic, electrochemical and quantum chemical methods10.1016/j.jtice.2016.08.013 ↗
41. A Dialkyldithiophosphate derivative as mild steel corrosion inhibitor in sulfuric acid solution10.20964/2016.06.45 ↗
42. Corrosion properties of different forms of carbon steel in simulated concrete pore water
43. Durability of steel fibres reinforcement concrete beams in chloride environment combined with inhibitor10.1155/2016/1743952 ↗
44. Critical chloride concentration of rebar corrosion in fly ash concrete10.1016/S1452-3981(23)17256-7 ↗
45. Monitoring corrosion of steel bars in reinforced concrete structures
46. Electrochemical evaluation of reinforcement concrete exposed to soil type sp contaminated with sulphates10.20964/2016.06.31 ↗
47. Corrosion of steel bars embedded in fibre reinforced concrete under chloride attack: state of the art10.1016/j.cemconres.2015.10.006 ↗
48. Corrosion assessment of steel bars used in reinforced concrete structures by means of eddy current testing