journal article·2018-05

Influence of added water and fly ash content on the characteristics, properties and early-age cracking sensitivity of alkali-activated slag/fly ash concrete cured at ambient temperature

Alexandre Rodrigue, Josée Duchesne, Benoit Fournier, Benoit Bissonnette

Publisher page

Abstract

Abstract For an appropriate air void system, good mechanical properties and low porosity/microcracking in alkali-activated binder systems, appropriate slag/fly ash proportioning, water and admixture contents are needed. Air entraining admixture dosages of up to 10 times the recommended dosage were necessary to obtain minimal air void properties similar to what is needed for normal portland cement concretes subjected to freezing conditions. Increasing added water resulted in increasing absorption and decreasing crack counts in concrete. Increasing fly ash contents resulted in increasing absorption and decreasing early-age crack counts. Increasing both added water and fly ash content resulted in less autogenous shrinkage.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. P. Tans, NOAA/ESRL (http://www.esrl.noaa.gov/gmd/ccgg/trends/) and Keeling, R., Scripps Institution of Oceanography (scrippsco2.ucsd.edu/).
2. Reducing greenhouse gasses emissions by fostering the deployment of alternative raw materials and energy sources in the cleaner cement manufacturing process10.1016/j.jclepro.2016.04.145 ↗
3. Ollivier · 2008
4. P.E. Petersson, Scaling resistance tests of concretes: Experience from practical use in Sweden., Atelier international sur la résistance des bétons aux cycles de gel-dégel en présence de sels fondants, Comité RILEM TC 117, Québec, 1993, p. 249–259. (1993).
5. The air requirement of frost-resistant concrete
6. A. Rodrigue, J. Duchesne, B. Fournier, B. Bissonnette, Mitigation of microcracking in alkali- activated combined slag and fly ash concretes for good performance in winter conditions, SP-320-8, 10th ACI/RILEM International Conference on Cementitious Materials and Alternative Binders for Sustainable Concrete, 10, (2017) 2017.
7. Vivian · 1981
8. Skalny · 1981
9. Cement & Concrete Composites Shrinkage characteristics of alkali-activated fly ash / slag paste and mortar at early ages10.1016/j.cemconcomp.2014.07.007 ↗
10. Y. Ma, G. Ye, Cement and Concrete Research The shrinkage of alkali activated fl y ash, 68 (2015) 75–82. doi: 10.1016/j.cemconres.2014.10.024.10.1016/j.cemconres.2014.10.024 ↗
11. Assessing the porosity and shrinkage of alkali activated slag-fly ash composites designed applying a packing model10.1016/j.conbuildmat.2016.05.026 ↗
12. Drying and autogenous shrinkage of pastes and mortars with activated slag cement10.1016/j.cemconres.2007.11.002 ↗
13. Influence of activator on the strength and drying shrinkage of alkali-activated slag mortar10.1016/j.conbuildmat.2007.10.011 ↗
14. Geopolymer technology: The current state of the art10.1007/s10853-006-0637-z ↗
15. Alkali-activated fly ashes: a cement for the future10.1016/S0008-8846(98)00243-9 ↗
16. The characterization of hardened alkali-activated blast-furnace slag pastes and the nature of the calcium silicate hydrate (C-S-H) phase10.1016/0008-8846(94)90002-7 ↗
17. Generalized structural description of calcium-sodium aluminosilicate hydrate gels: the cross-linked substituted tobermorite model10.1021/la4000473 ↗
18. A model for the C-A-S-H gel formed in alkali-activated slag cements10.1016/j.jeurceramsoc.2011.04.036 ↗
19. Gel nanostructure in alkali-activated binders based on slag and fly ash, and effects of accelerated carbonation10.1016/j.cemconres.2013.06.007 ↗
20. X-ray microtomography shows pore structure and tortuosity in alkali-activated binders10.1016/j.cemconres.2012.03.004 ↗
21. Compressive strength development and shrinkage of alkali-activated fly ash–slag blends associated with efflorescence10.1617/s11527-015-0694-3 ↗
22. Drying shrinkage of slag blended fly ash geopolymer concrete cured at room temperature10.1016/j.proeng.2015.11.066 ↗
23. Influence of activator type on hydration kinetics, hydrate assemblage and microstructural development of alkali activated blast-furnace slags10.1016/j.cemconres.2010.11.016 ↗
24. Durability of alkali-activated materials: progress and perspectives10.1111/jace.12831 ↗
25. ASTM C 642-06, Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, United States Am. Soc. Test. Mater. (2008) 11–13. doi:10.1520/C0642-13.5.
26. Influence of fly ash on the water and chloride permeability of alkali-activated slag mortars and concretes10.1016/j.conbuildmat.2013.07.106 ↗
27. CSA Standard. Béton : Constituants et exécution des travaux / Méthodes d’essai et pratiques normalisées pour le béton. Csa a23.1-09 / a23.2-09 (2011).
28. ASTM C305, Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency (2014) 1–3. doi: 10.1520/C0305-14.2.
29. ASTM C191, Standard Test Method for Time of Setting of Hydraulic Cement by Vicat Needle, ASTM Int. i (2013) 1–8. doi: 10.1520/C0191-13.2.
30. ASTM C457, Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete 1, (1998).
31. Evaluation of the stiffness damage test (SDT) as a tool for assessing damage in concrete due to ASR: test loading and output responses for concretes incorporating fine or coarse reactive aggregates10.1016/j.cemconres.2013.11.003 ↗
32. ASTM C1698, Standard Test Method for Autogenous Strain of Cement Paste and Mortar, i (2014) 1–8. doi: 10.1520/C1698-09.2.
33. D.C. Montgomery, Applied Statistics and Probability for Engineers Third Edition, 2003. doi: 10.2307/1269738.10.2307/1269738 ↗
34. CSN EN 480-1, Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing, (2014).
35. CSN EN 934-2+A1, Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling, (2012).
36. The effect of heat-curing on transport properties of low-calcium fly ash-based geopolymer concrete10.1016/j.conbuildmat.2016.02.210 ↗
37. Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly ash10.1016/j.cemconcomp.2013.09.006 ↗
38. Cement Association of Canada. Concrete Design Handbook. Third edition, Ottawa. (2006).