journal article·2018-07

Temperature responses of asphalt mixture physical and finite element models constructed with phase change material

Wei Si, Biao Ma, Xue-yan Zhou, Jun-ping Ren, Yu-xiang Tian, Yi Li

Publisher page

Abstract

Abstract Temperature changes of pavement structure have significant influence on the internal stress, strain, and deformation characteristics of the pavement structure. For example, rutting occurs in high temperature range and pavement cracks when its temperature is low. This yields failure and reduces the service life of the pavement structure. Phase change material, PCM, which is a new type of additive for pavement engineering, has been studied for regulating the working temperature of pavement structure. By storing or releasing thermal energy via phase change process, the PCM is able to maintain the temperature of pavement structure in a relatively narrow range. In the present study, outdoor asphalt mixture model constructed with and without PCM were established. The outdoor model was directly exposed to the environment and the temperature distribution inside the outdoor model was measured by using temperature sensors. The specific heat capacities of asphalt mixture mixed with and without PCM were determined by calorimetric method, which is simple and reliable. Based on the outdoor asphalt mixture model, the corresponding finite element model was established by using ANSYS, and the temperature distribution inside the finite element model was determined according to the measured specific heat capacity, density, thermal conductivity of the asphalt mixture, and the meteorological data which were used for determining the boundary conditions. Comparison between the calculated and actual measured temperature values was made. The results show that the calculated temperature values had good agreement with the measure ones, based on which the accuracy of material parameters and boundary conditions were validated. The results of the present study can lay the foundation for calculating the temperature field of pavement structure constructed with PCM and investigating the application of PCM in road engineering.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Asphalt Pavement Performance Evaluation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Wang · 2010
2. Huang · 2004
3. Thermal reflective cracking of asphalt concrete overlays10.1080/10298430903578911 ↗
4. Exploration of road temperature-adjustment material in asphalt mixture10.1080/14680629.2014.885462 ↗
5. The Mechanism of different thermoregulation types of composite shape-stabilized phase change materials used in asphalt pavement10.1016/j.conbuildmat.2015.08.038 ↗
6. Preparation and analysis of composite phase change material used in asphalt mixture by sol-gel method10.1016/j.conbuildmat.2014.07.100 ↗
7. Determination of specific heat capacity on composite shape-stabilized phase change materials and asphalt mixtures by heat exchange system
8. Preparation and analysis of composite phase change material used in asphalt mixture by sol-gel method10.1016/j.conbuildmat.2014.07.100 ↗
9. Study on application of PCM in asphalt mixture
10. Selection of phase change materials used in heat storage cooling asphalt pavement
11. Effect of composite shape-stabilized phase change material on asphalt mixture temperature10.4028/www.scientific.net/AMR.311-313.2151 ↗
12. Preparation of composite shape-stabilized phase change materials for highway pavements10.1016/j.conbuildmat.2012.12.027 ↗
13. Research on the model of 3D nonlinear transient thermal field of asphalt pavement
14. Thermal analysis for AC+ CRCP composite pavement using finite element methods
15. Assessment of temperature fluctuations in asphalt pavements due to thermal environmental conditions using a two-dimensional, transient finite-difference approach10.1061/(ASCE)0899-1561(2005)17:4(465) ↗
16. Evaluation of the influence of water and temperature on the rheological behavior and resistance to fatigue of asphalt mixtures10.1016/j.conbuildmat.2017.10.030 ↗
17. Effect of types of aggregate and sand-to-aggregate volume ratio on UPV in concrete10.1016/j.conbuildmat.2016.08.102 ↗
18. Thermal property estimation utilizing the Laplace transform with application to asphaltic pavement10.1016/0017-9310(77)90212-5 ↗
19. Lu · 2005
20. Bian · 2013
21. Simulation and modification of daily variation of air temperature
22. Ren · 2013