journal article·2018-08

Novel applications of waste ceramics on the fabrication of foamed materials for exterior building walls insulation

Lin Zhu, Shujing Li, Yuanbing Li, Nana Xu

Publisher page

Abstract

Abstract In this paper, a novel fabrication method has been proposed by using waste ceramic and other polishing materials as main raw materials to prepare foam ceramic for the potential applications in thermal insulation of exterior building walls. In particular, the content of Al2O3 and SiO2 was almost 90% in this kind of materials. The polishing materials result from grinding polished tiles into powder and the ceramic foam was foamed slurry produced by self-configure foaming solution after mechanical stirring. Effects of content of foam and clay on the specimens’ properties such as compressive strength, apparent porosity, bulk density, water absorption and thermal conductivity were investigated. Based on results, when the content of clay was 10 wt%, the amount of foam was 10 wt%, apparent porosity of specimens sintered at 1000 °C was 50.6%, linear change was 7.2%, bulk density was 0.70 g/cm3, compressive strength was 8.0 MPa, and thermal conductivity was 0.137 W/(m·K) at 200 °C. Microstructures of specimens were also detected and compared, and the exceptional mean pore size was 39.7 μm which was measured by using “Micro-image Analysis and Process System” (MIAPS) software. Due to the difference in bulk density, the internal pore structure and performance of the sample are different. Comprehensive properties of specimens can be optimized by adjusting the amount of foam and clay. The proposed method for obtaining insulation foamed materials using ceramics' waste and other polishing materials was feasible, whilst saving resources and energy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. The development history and prospects of biomass-based insulation materials for buildings10.1016/j.rser.2016.11.140 ↗
2. Insulation materials for the building sector: a review and comparative analysis10.1016/j.rser.2016.05.045 ↗
3. Use of papermaking pulps in foam-formed thermal insulation materials10.3183/npprj-2017-32-03-p367-374 ↗
4. Preparation of novel ceramic tiles with high Al2O3, content derived from coal fly ash10.1016/j.conbuildmat.2016.04.014 ↗
5. Development of sustainable construction material using industrial and agricultural solid waste: a review of waste-create bricks10.1016/j.conbuildmat.2011.04.038 ↗
6. Investigation of the effect of some fire retardant chemicals and mineral materials used in surface coating on combustion performance of particleboard10.15376/biores.12.4.8862-8869 ↗
7. Influence of pore characteristics on the properties of porous mullite ceramics
8. Tailored surface properties of ceramic foams for liquid multiphase reactions10.1002/adem.201700418 ↗
9. Preparation and properties of porous ceramic aggregates using electrical insulators waste10.1016/j.ceramint.2015.01.009 ↗
10. Cement: its chemistry and properties10.1021/ed080p623 ↗
11. A cross mixture design to optimise the formulation of a ground waste glass blended cement10.1016/j.conbuildmat.2011.10.032 ↗
12. Preparation and characterization of foam ceramics from red mud and fly ash using sodium silicate as foaming agent10.1016/j.ceramint.2012.08.042 ↗
13. Red clay application in the utilization of paper production sludge and scrap glass to fabricate ceramic materials10.1016/j.clay.2015.01.031 ↗
14. Durability against wetting–drying cycles of sustainable Lightweight Cellular Cemented construction material comprising clay and fly ash wastes10.1016/j.conbuildmat.2014.12.025 ↗
15. Combined conduction–convection–radiation heat transfer of slip flow inside a micro-channel filled with a porous material10.1007/s11242-015-0483-z ↗
16. Synthesis of fly ash-calcined clay geopolymers: reactivity, mechanical strength, structural and microstructural characteristics10.1016/j.conbuildmat.2016.08.076 ↗
17. Cement-lateritic gravels mixtures: microstructure and strength characteristics10.1016/j.conbuildmat.2007.07.019 ↗
18. A reformulation of the fundamental thermodynamics of surface tension for spherical bubbles and drops10.1016/j.jct.2004.07.022 ↗
19. Bubble size distribution in foaming of liquid aluminum and the role of coarsening and coalescence10.1002/adem.201600745 ↗