journal article·2018-10Open access

CSA-based Portland-free binders to manufacture sustainable concretes for jointless slabs on ground

L. Coppola, D. Coffetti, E. Crotti, T. Pastore

Abstract

Abstract The paper is aimed to the evaluation of the influence of water/binder ratio, tartaric acid dosage and curing condition on rheological, elastic and physical properties of sustainable shrinkage-compensating concretes manufactured with calcium sulphoaluminate cement (CSA), anhydrite ( C S ¯ ) and supplementary cementitious materials (SCMs)/lime (CH) compound in place of ordinary Portland cement (OPC). Results indicated that tartaric acid-based set-retarding admixture governs the behavior of concrete both in fresh and hardened state. In addition, according to Abram’s model, results evidenced the water/binder ratio as a key factor in strength gain. Moreover, tartaric acid allows the production of shrinkage-compensating Portland-free concretes particularly indicated for slabs on ground. Finally, by replacing OPC with SCMs and lime, it is possible to obtain, both for CO2-emissions and energy consumption, a reduction up to 60% at equal strength class respect to an OPC-based concrete.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Technology and trends of concrete industrial floors10.1016/j.proeng.2013.09.019 ↗
2. Drying shrinkage, curling, and joint opening of slabs-on-ground
3. A long term restrained shrinkage study of concrete slabs on ground10.1016/j.engstruct.2015.08.018 ↗
4. Assessment of shrinkage-induced cracks in restrained and unrestrained cement-based slabs10.1016/j.conbuildmat.2016.11.036 ↗
5. Performance and compatibility of phosphonate-based superplasticizers for concrete10.3390/buildings7030062 ↗
6. L. Coppola, S. Lorenzi, S. Garlati, P. Kara, The rheological and mechanical performances of concrete manufactured with blended admixtures based on phosphonates, 2016. doi:10.4028/http://www.scientific.net/KEM.674.159.10.4028/www.scientific.net/KEM.674.159 ↗
7. Optimization of the high-strength superplasticized concrete of the Three-Gorge dam in China | Ottimizzazione del calcestruzzo ad alta resistenza meccanica con superfluidificante per la diga delle Tre Gole in Cina
8. Compatibility issues of NSF-PCE superplasticizers with several lots of different cement types (long-term results)
9. Comparison between the performance of expansive SCC and expansive conventional concretes in different expansion and curing conditions10.1016/j.conbuildmat.2017.01.039 ↗
10. Concrete production by using cast iron industry by-products | Impiego di sottoprodotti dell’industria siderurgica nel confezionamento di calcestruzzo per opere in c.a. e c.a.p
11. L. Coppola, S. Lorenzi, A. Buoso, Electric arc furnace granulated slag as a partial replacement of natural aggregates for concrete production, in: 2nd Int. Conf. Sustain. Constr. Mater. Technol., 2010.
12. Enhancing behavior of large volume underground concrete structure using expansive agents10.1016/j.conbuildmat.2016.03.075 ↗
13. Understanding the shrinkage compensating ability of type K expansive agent in concrete10.1016/j.conbuildmat.2016.04.092 ↗
14. Effect of SRA on the expansive behaviour of mortars based on sulphoaluminate agent10.1016/j.cemconcomp.2011.01.001 ↗
15. Effects of shrinkage reducing admixture in shrinkage compensating concrete under non-wet curing conditions10.1016/j.cemconcomp.2004.09.020 ↗
16. The origin of early age expansions induced in cementitious materials containing shrinkage reducing admixtures10.1016/j.cemconres.2010.12.004 ↗
17. ACI 360R-10 – Guide to design of slabs-on-ground, 2010.
18. ACI 223R-10 – Guide for the use of shrinkage-compensating concrete, 2010.
19. Crack-free concrete for outside industrial floors in the absence of wet curing and contraction joints10.1016/j.cemconcomp.2008.07.002 ↗
20. Combined effect of expansive and shrinkage reducing admixtures to obtain stable and durable mortars10.1016/j.cemconres.2004.11.021 ↗
21. Combined effect of expansive, shrinkage reducing and hydrophobic admixtures for durable self compacting concrete10.1016/j.conbuildmat.2012.04.129 ↗
22. Water reducers for the high alumina cement-silica fume system10.1007/BF02485972 ↗
23. Use of tartaric acid for the production of sustainable Portland-free CSA-based mortars10.1016/j.conbuildmat.2018.03.137 ↗
24. Alkali activated waste fly ash as sustainable composite: influence of curing and pozzolanic admixtures on the early-age physico-mechanical properties and residual strength after exposure at elevated temperature10.1016/j.compositesb.2017.08.012 ↗
25. Low temperature alkaline activation of weathered fly ash: Influence of mineral admixtures on early age performance10.1016/j.conbuildmat.2015.02.069 ↗
26. Pre-packed alkali activated cement-free mortars for repair of existing masonry buildings and concrete structures10.1016/j.conbuildmat.2018.04.034 ↗
27. Plain and ultrafine fly ashes mortars for environmentally friendly construction materials
28. Properties of concrete
29. Generalization of strength versus water-cementitious ratio relationship to age10.1016/j.cemconres.2006.05.013 ↗
30. Compressive strength prediction of Portland cement concrete with age using a new model10.1016/j.hbrcj.2013.09.005 ↗
31. Understanding expansion in calcium sulfoaluminate-belite cements10.1016/j.cemconres.2011.07.010 ↗
32. Discussion of the paper Understanding expansion in calcium sulfoaluminate-belite cements by I.A. Chen et al., Cem. Concr. Res. 42 (2012) 51-6010.1016/j.cemconres.2012.08.002 ↗
33. Environmental implications of the manufacture of calcium sulfoaluminate-based cements, 2nd Int