journal article·2018-11

Mechanical properties of high strength steel strand at low temperatures: Tests and analysis

Jian Xie, Xueqi Zhao, Jia-Bao Yan

Publisher page

Abstract

Abstract This manuscript studied mechanical properties of steel strands for prestressed concrete (PC) structures at different low temperatures ranging from 20 °C to −160 °C. 21 tensile tests were performed to obtain the stress-strain curves of steel wires in strand at different low temperatures. Empirical prediction formulae were developed to incorporate the influences of low temperatures on mechanical properties of steel wires. Based on the stress-strain curves of single wire, theoretical and numerical models were developed to predict the mechanical properties of multi-layer steel strands. The accuracies of these theoretical and numerical models were validated by the test results. Based on the test and analysis results, empirical models were developed to predict the mechanical properties of multi-layer steel strands at different low temperatures including the elastic modulus, yield and ultimate strengths. This offers useful means to calculate the mechanical properties of steel strands at low temperatures since their properties varied with their geometry and layout of steel wires. Finally, recommended prediction procedures are given to determine the mechanical properties of steel strands at different low temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fire effects on concrete materials · Structural Load-Bearing Analysis · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Finite element analysis of spiral strands with different shapes subjected to axial loads10.1016/j.advengsoft.2015.01.004 ↗
2. Experimental studies on the axial-compression performance of concrete at cryogenic temperatures10.1016/j.conbuildmat.2014.09.033 ↗
3. Assessment of undiscovered oil and gas in the arctic10.1126/science.1169467 ↗
4. Palmer · 2013
5. Cold utilization systems of LNG: a review10.1016/j.rser.2017.05.161 ↗
6. Experimental studies on mechanical properties of steel reinforcements under cryogenic temperatures10.1016/j.conbuildmat.2017.06.123 ↗
7. Behavior at cryogenic temperatures of steel for concrete reinforcement
8. Behavior of the reinforce concrete at cryogenic temperatures10.1016/j.cryogenics.2007.07.001 ↗
9. Mechanical properties of normal strength mild steel and high strength steel S690 in low temperature relevant to Arctic environment10.1016/j.matdes.2014.04.057 ↗
10. Stress-strain behaviour of reinforcing steel and concrete under seismic strain rates and low temperature10.1007/BF02480594 ↗
11. Behaviour at cryogenic temperatures of tendon anchorages for prestressing concrete10.1007/BF02481826 ↗
12. Love · 1944
13. Response of a strand to axial and torsional displacements10.1243/JMES_JOUR_1973_015_045_02 ↗
14. Derivation of a new stiffness matrix for helically armoured cables considering tension and torsion10.1002/nme.1620140405 ↗
15. Costello · 1997
16. Lay effect of wire rope10.1061/JMCEA3.0002508 ↗
17. Closed-form analysis for elastic deformations of multi-layered strand10.1115/1.3173136 ↗
18. A concise finite element model for simple straight wire rope strand10.1016/S0020-7403(98)00039-3 ↗
19. A concise finite element mode for three-layered straight wire rope strand10.1016/S0020-7403(98)00111-8 ↗
20. Finite element study of behavior and interface force conditions of seven-wire strand under axial and lateral loading10.1016/j.conbuildmat.2014.05.009 ↗
21. An investigation on stressing and breakage response of a prestressing strand using an efficient finite element model10.1016/j.engstruct.2016.05.030 ↗
22. Full 3D finite element modelling of spiral strand cables10.1016/j.conbuildmat.2011.12.073 ↗
23. Analytical and finite element modelling of the elastic–plastic behaviour of metallic strands under axial–torsional loads10.1016/j.ijmecsci.2016.06.016 ↗
24. ASTM, A370-13. Standard Test Methods and Definitions for Mechanical Testing of Steel Products, ASTM International, West Conshohocken, United States, 2013.
25. Elastic-plastic modeling of metallic strands and wire ropes under axial tension and torsion loads10.1016/j.ijsolstr.2017.09.008 ↗
26. The response of wire rope strands to axial tensile loads-Part I. Experimental results and theoretical predictions10.1016/0020-7403(87)90033-6 ↗