journal article·2018-11

Proportioning of self-compacting steel-fiber reinforced concrete mixes based on target plastic viscosity and compressive strength: Mix-design procedure & experimental validation

Ángel de la Rosa, Elisa Poveda, Gonzalo Ruiz, Héctor Cifuentes

Publisher page

Abstract

This paper presents a novel proportioning methodology for self-compacting steel-fiber reinforced concrete (SCSFRC), based on a previous methodology for plain self-compacting concrete [Journal of Sustainable Cement-Based Materials 5:4 (2016) 199–216 & 217–232]. The procedure is based on the target plastic viscosity and the compressive strength required for the mix and it accounts for fiber parameters such as volume fraction and aspect ratio. The procedure is valid for fiber contents up to 1% and for compressive cube strengths within the range of 30–80 MPa. The effective plastic viscosity of the SCSFRC is estimated from the plastic viscosity of the cement paste by means of micro-mechanical models that consider fibers as a phase of the mix. The procedure can be programmed numerically to generate practical mix-design charts to determine the dosage of the components. The paper provides an example of an application that uses these design charts. Likewise, the methodology is validated through the design of six mixes, which are actually prepared in the laboratory and whose properties are measured in fresh and hardened states.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. A review on mixture design methods for self-compacting concrete10.1016/j.conbuildmat.2015.03.079 ↗
2. EFNARC, The European Guidelines for Self-Compacting Concrete – Specification, Production and Use, 2005.www.efnarc.org.
3. Un nuevo enfoque para optimizar dosificaciones de hormigón autocompactante
4. Reproportioning of steel fibre reinforced concrete mixes and their impact resistance10.1016/j.cemconres.2005.06.011 ↗
5. A method for mix-design of fiber-reinforced self-compacting concrete10.1016/j.cemconres.2007.03.014 ↗
6. Mixture design and testing of fiber-reinforced self-consolidating concrete
7. Rheological model for self-consolidating concrete
8. De Larrard · 1999
9. Packing of ternary mixtures of nonspherical particles10.1111/j.1151-2916.1992.tb05502.x ↗
10. Grünewald · 2004
11. Mix proportioning of self-compacting high- and ultra-high-performance concretes with and without steel fibres10.1680/macr.11.00190 ↗
12. Mix proportioning of self-compacting normal and high-strength concretes10.1680/macr.12.00164 ↗
13. Integration approach of the Couette inverse problem of powder type self-compacting concrete in a wide-gap concentric cylinder rheometer10.1016/j.jnnfm.2007.10.003 ↗
14. Yield stress and viscosity equations for mortars and self-consolidating concrete10.1016/j.cemconres.2007.02.009 ↗
15. Fibre reinforced self-compacting concrete for precast10.1016/j.hya.2017.04.017 ↗
16. D. Carro-López, B. González-Fonteboa, F. Martínez-Abella, I. González-Taboada, J. de Brito, F. Varela-Puga, Proportioning, fresh-state properties and rheology of self-compacting concrete with fine recycled aggregates, Hormigón y Acero. doi: 10.1016/j.hya.2017.04.023.10.1016/j.hya.2017.04.023 ↗
17. Development of a mix design method for SCC based on the rheological characteristics of paste10.1016/j.conbuildmat.2013.12.008 ↗
18. New methodology for designing self-compacting concrete
19. Future research needs in self-consolidating concrete
20. Parameter-study on the influence of steel fibers and coarse aggregate content on the fresh properties of self-compacting concrete10.1016/S0008-8846(01)00555-5 ↗
21. Proportioning of self-compacting concrete mixed based on target plastic viscosity and compressive strength: Part I – Mix design procedure
22. Proportioning of self-compacting concrete mixes based on target plastic viscosity and compressive strength: Part II – Experimental validation
23. Improved tensile performance with fiber reinforced self-compacting concrete
24. Normal and high-strength fiber reinforced concrete under compression10.1061/(ASCE)0899-1561(1992)4:4(415) ↗
25. Stress-strain behavior of steel fiber-reinforced concrete in compression10.1061/(ASCE)0899-1561(2008)20:3(255) ↗
26. Measurement of flexural toughness of fiber-reinforced concrete using a novel technique. Part 2: Performance of various composites
27. Influence of the fiber content on the compressive low-cycle fatigue behavior of self-compacting SFRC10.1016/j.ijfatigue.2017.04.005 ↗
28. Mindess · 2002
29. Bentur · 2007
30. Prediction of the plastic viscosity of self-compacting steel fibre reinforced concrete10.1016/j.cemconres.2009.08.018 ↗
31. A mechanism for non-newtonian flow in suspensions of rigid spheres10.1122/1.548848 ↗
32. The rheology of fresh high-performance concrete10.1016/0008-8846(95)00213-8 ↗
33. J. Fernández-Gómez, Guía práctica para la utilización del hormigón autocompactante, Instituto Español del Cemento y sus Aplicaciones (IECA), 2005.
34. ACI 237R-07, Self-Consolidating Concrete, American Concrete Institute, 2007.
35. RILEM TC 174-SCC, Self-Compacting Concrete – State-of-the-Art Report, RILEM, 2000.
36. Optimum mix proportioning of self-compacting concrete
37. Determination of rheology of self-consolidating concrete using the 4C-rheometer and how to make use of the results10.1520/JAI102003 ↗
38. BASF MasterGlenium, Technical Data Sheet MasterEase 5025, 31/07/2017 Edition, BASF Masterbuilders Solutions, 2017.
39. Rheometric and ultrasonic investigations of viscoelastic properties of fresh Portland cement pastes10.1016/j.cemconres.2005.08.007 ↗
40. BS EN 12350-8, Testing Fresh Concrete. Self-Compacting Concrete. Slump-Flow Test, BSI, 2010.
41. BS EN 12350-10, Testing Fresh Concrete. Self-Compacting Concrete. L Box Test, BSI, 2010.
42. ASTM C39/C39M, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA, 2015.