journal article·2018-12

Thermal performance enhancement of organic phase change materials using spent diatomite from the palm oil bleaching process as support

Karen Acurio, Andrés Chico-Proano, Javier Martínez-Gómez, Carlos F. Ávila, Álavaro Ávila, Marco Orozco

Publisher page

Abstract

Abstract This paper presents a sustainable PCM for potential applications in thermal energy storage in buildings. Up to date, PCMs are elaborated with raw and expensive materials. Therefore, the main appeal of the PCM is its support material, recycled diatomite, a palm oil industrial waste. PCMs were elaborated with three support materials (raw, recycled, and recycled-calcined diatomite) to compare its influence on PCM thermal and chemical behavior. Different mixtures of organic components (esters of palm oil and commercial stearic acid in different proportions) were incorporated into the three support materials. A characterization process by differential scanning calorimetry (DSC) was used to select the organic mixture with the highest value of latent heat of fusion and the closest phase change temperature range to the thermal comfort in each support material. To establish the thermal and chemical stability of the PCMs, DSC, thermogravimetry (TGA), and Fourier-transform infrared spectroscopy (FT-IR) analysis were carried out at 0, 120, 240 and 360 thermal cycles. One of the major outcomes from these joint efforts is the good and long thermal and chemical performance of the PCMs composed by 100% of commercial stearic acid methyl esters and recycled-calcined diatomite. This PCM is capable to have a similar energy storage capacity to the PCM supported in raw diatomite. The results show the effectiveness of the use of recycled-calcined diatomite as support material to obtain potential and sustainable PCMs for energy saving.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Adsorption and Cooling Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Optimal preparation of PCM/diatomite composites for enhancing thermal properties10.1016/j.ijheatmasstransfer.2013.03.043 ↗
2. Thermal performance assessment of encapsulated PCM based thermal management system to reduce peak energy demand in Buildings10.1016/j.enbuild.2016.01.042 ↗
3. Application of phase change materials in gypsum boards to meet building energy conservation goals
4. Experimental study of using PCM in brick constructive solutions for passive cooling10.1016/j.enbuild.2009.10.022 ↗
5. Development of phase change materials based microencapsulated technology for buildings: a review10.1016/j.rser.2010.10.006 ↗
6. Materials used as PCM in thermal energy storage in buildings: a review10.1016/j.rser.2010.11.018 ↗
7. Thermal stability of phase change materials used in latent heat energy storage systems: a review10.1016/j.rser.2012.10.022 ↗
8. Fatty acid esters-based composite phase change materials for thermal energy storage in buildings10.1016/j.applthermaleng.2011.11.017 ↗
9. A.S. Fleischer, Thermal Energy Storage Using Phase Change Materials Fundamentals and Applications, 2015. https://doi.org/10.1007/97-3-319-20922-7.10.1007/978-3-319-20922-7 ↗
10. Thermal comfort in residential buildings: comfort values and scales for building energy simulation10.1016/j.apenergy.2008.07.011 ↗
11. Study on preparation and thermal properties of binary fatty acid/diatomite shape-stabilized phase change materials10.1016/j.solmat.2011.04.017 ↗
12. Thermal cycling test of few selected inorganic and organic phase change materials10.1016/j.renene.2008.02.026 ↗
13. Preparation and thermal reliability of methyl palmitate/methyl stearate mixture as a novel composite phase change material10.1016/j.enbuild.2013.09.038 ↗
14. Review on thermal energy storage with phase change: materials, heat transfer analysis and applications
15. Preparation and properties of palmitic acid/SiO2 composites with flame retardant as thermal energy storage materials10.1016/j.solmat.2011.02.010 ↗
16. Fatty acid ester-based commercial products as potential new phase change materials (PCMs) for thermal energy storage10.1016/j.solmat.2012.08.015 ↗
17. Granular phase changing composites for thermal energy storage10.1016/j.solener.2004.04.022 ↗
18. Fatty acids as phase change materials (PCMs) for thermal energy storage: a review10.1081/GE-200038722 ↗
19. Knothe · 2010
20. Biodiesel production from crude palm oil using sulfonic acid-modified mesostructured catalysts10.1016/j.cej.2009.12.037 ↗
21. S. Mo, K. Zhu, T. Yin, Y. Chen, Z. Cheng, Phase change characteristics of ethylene glycol solution-based nanofluids for subzero thermal energy storage, 2016. https://doi.org/10.1002/er10.1002/er.3599 ↗
22. Solar Energy Materials and Solar Cells Preparation and characterization of hybrid nanocomposite embedded organic methyl ester as phase change material10.1016/j.solmat.2017.06.031 ↗
23. Preparation and thermophysical properties of a novel form-stable CaCl26H2O/sepiolite composite phase change material for latent heat storage10.1016/j.solmat.2017.04.014 ↗
24. Polyethylene glycol (PEG)/diatomite composite as a novel form-stable phase change material for thermal energy storage10.1016/j.solmat.2011.01.022 ↗
25. Diatomite: A promising natural candidate as carrier material for low, middle and high temperature phase change material10.1016/j.enconman.2015.03.071 ↗
26. Preparation and properties of lauric acid/diatomite composites as novel form-stable phase change materials for thermal energy storage10.1016/j.enbuild.2015.06.059 ↗
27. Diatomite: its characterization, modifications and applications10.3923/ajmskr.2010.121.136 ↗
28. Regeneración de Arcillas de Blanqueo Empleadas en la Decoloración de Aceites Vegetales Comestibles
29. Regeneration and utilization of spent bleaching clay
30. Y.A. Alhamed, A.A. Al-Zahrani, Regeneration of spent bleaching clay used in edible oil refining in Saudi Arabia, in: Proceedings of the 6th Saudi Engineering Conference, Dhahran, 2002, 461-472
31. Grob · 2004
32. Instituto Ecuatoriano de Normalización (INEN). (2014). Aceites y grasas de origen animal y vegetal. Análisis por cromatografía en fase gaseosa de los ésteres metílicos de ácidos grasos. NTE INEN-ISO 5508. Obtenido de: http://www.normalizacion.gob.ec/wpcontent/uploads/downloads/2014/EXTRACTO_2014/KCA/nte_inen_iso_5508extracto.pdf (Septiembre, 2016).
33. Latent heat characteristics of fatty acid derivatives pursuant phase change material applications10.1016/S0009-2509(03)00006-X ↗
34. Obtención de biodiésel por transesterificación de aceite de cocina usado
35. British Standards Institution, Solid biofuels. Determination of moisture content. Oven dry method. Total moisture. Reference method. BS EN 18134-1: 2015, 2009.
36. British Standards Institution, Solid biofuels – Determination of the content of volatile. BS EN 15148, 2009.
37. British Standards Institution, Solid biofuels. Determination of ash content. BS EN 18122, 2015.
38. Fatty acids as phase change materials: a review10.1016/j.rser.2013.08.107 ↗
39. Armarego · 2013
40. Adsorption of carotenes and phosphorus from palm oil onto acid activated bleaching earth: Equilibrium, kinetics and thermodynamics10.1016/j.jfoodeng.2013.04.026 ↗
41. O’Brien · 2009
42. Mandelkern · 2004
43. Thermal stability evaluation of palm oil as energy transport media10.1016/j.enconman.2004.10.008 ↗
44. Infrared spectroscopy of different phosphates structures10.1016/j.saa.2010.08.044 ↗
45. Hydrotropy: a promising tool for solubility enhancement: a review
46. Enhancement of palm oil refinery waste – spent bleaching earth (SBE) into bio organic fertilizer and their effects on crop biomass growth10.1016/j.indcrop.2013.06.016 ↗
47. Degumming and bleaching: effect on selected constituents of palm oil