Orthogonal experimental investigation of steel-PVA fiber-reinforced concrete and its uniaxial constitutive model
Source abstract
Abstract
Abstract A concrete mixture consisting of steel fibers (S) and polyvinyl alcohol fibers (PVA) has been proven to be an effective type of hybrid fiber-reinforced concrete (HyFRC). To further investigate the engineering potential of S-PVA HyFRC, this paper studies the effects of different factors on mixture performance, and establishes uniaxial constitutive models through an orthogonal experiment. A total of fifteen factors were incorporated. Slump test and various mechanical tests were conducted. Then, a methodology to assess the parameter combination considering various performance indicators was proposed and used in this study to maximize concrete performance. Finally, the generalized and the simplified compressive and tensile constitutive prediction models of S-PVA HyFRC were established and the predicted curves were compared with the test curves. The results show that the interaction factors are not negligible in S-PVA HyFRC. Cast process significantly influences mixture workability and strength, but it has no impact on toughness. Parameter combination assessments among five performance indicator categories were performed and the assessment methodology was verified. The generalized constitutive prediction model was also verified by the test curves. Nevertheless, the simplified model may cause large errors and should only be used to roughly estimate the mixture property in the preliminary design stage of an engineering project.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Mechanical properties of hybrid fiber-reinforced concrete at low fiber volume fraction10.1016/S0008-8846(02)00913-4 ↗
2. High performance multimodal fiber reinforced cement composites (HPMFRCC): the LCPC experience
3. Microfiber and macrofiber hybrid fiber-reinforced concrete10.1061/(ASCE)0899-1561(2005)17:5(595) ↗
4. High-performance fiber-reinforced concrete: a review10.1007/s10853-016-9917-4 ↗
5. Hybrid fiber reinforced concrete (HyFRC): fiber synergy in high strength matrices10.1007/BF02480516 ↗
6. Strength and fracture energy characteristics of self-consolidating concrete incorporating polyvinyl alcohol, steel and hybrid fibres10.1016/j.conbuildmat.2013.03.054 ↗
7. Dispersion, workability and mechanical properties of different steel-microfiber-reinforced concretes with low fiber content10.3390/su10072335 ↗
8. Deflection hardening and workability of hybrid fiber composites
9. Performance-based approach for the design of a deflection hardened hybrid fiber-reinforced concrete10.1061/(ASCE)0733-9399(2009)135:9(978) ↗
10. Self-consolidating hybrid fiber reinforced concrete: development, properties and composite behavior10.1016/j.conbuildmat.2015.12.062 ↗
11. Tests on concrete reinforced with hybrid or monolithic steel and polyvinyl alcohol fibers
12. High mechanical performance of fibre reinforced cementitious composites: the role of “casting-flow induced” fibre orientation10.1617/s11527-010-9613-9 ↗
13. Framework for the design and analysis of steel fiber reinforced self-compacting concrete structures10.1016/j.conbuildmat.2012.04.135 ↗
14. On flow properties, fibre distribution, fibre orientation and flexural behaviour of FRC10.1617/s11527-007-9229-x ↗
15. Specification for mix proportion design of ordinary concrete, JGJ 55-2011, China Building Industry Press, Beijing, 2011.
16. Cai · 1985
17. Code for acceptance of constructional quality of concrete structures, GB 50204-2015, China Building Industry Press, Beijing, 2015.
18. Experimental technical on uniaxial tensile behavior of concrete under dynamic loading
19. Experimental study on hybrid fiber-reinforced concrete subjected to uniaxial compression10.1061/(ASCE)MT.1943-5533.0000764 ↗
20. Code for design of concrete structures, GB 50010-2010, China Building Industry Press, Beijing, 2014.