journal article·2019-03Open access

Dynamics of water evaporation from porous asphalt

M. Aboufoul, N. Shokri, E. Saleh, C. Tuck, A. Garcia

Abstract

The dynamics of water evaporation from porous asphalt mixture, with porosity ranging from 15% to 12 29%, have been investigated in this article. In order to test the same samples under different conditions, the pore structure of asphalt was quantified using X-ray Computed Tomography (CT) scans and 3D printed in transparent resin blocks. 3D printed transparent resin samples were tested under controlled laboratory conditions to understand the effect of pore space topology on the water retention and drying dynamics. The macroporosity, pore size distribution, air void tortuosity, water conductivity, and water retention curves of the 3D printed porous asphalt samples were quantified by means of image analysis. Moreover, a model was developed and tested experimentally to estimate the evaporation rates from porous asphalt materials under a wide range of porosities. Within the range of asphalt mixtures studied in the present work, the evaporation rate is related predominantly to the porosity, pore size distribution and tortuosity. It was found that the period over which water evaporation occurs at the surface is relatively short during drying of porous asphalt materials due to their relatively large pores weakening the capillary forces. This results in significantly shortening the so-called stage-1 evaporation (when the drying rate is controlled by liquid vaporisation at the surface) and early onset of the transition period (when both surface water evaporation and vapour diffusion inside porous asphalt play a comparable role in supplying the 26 evaporative demand). The transition period is followed by the stage-2 evaporation when the process is limited by the vapour diffusion inside the porous asphalt. Our results illustrate that the beginning of the stage-2 evaporation depends on the porosity and tortuosity of the porous asphalt material among other parameters. Our results and analysis provide new insights into the dynamics of water evaporation from asphalt materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High voltage insulation and dielectric phenomena · Aerosol Filtration and Electrostatic Precipitation · Urban Stormwater Management Solutions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Pore-scale analysis of evaporation and condensation dynamics in porous media10.1021/la101596y ↗
2. Factors affecting hydraulic conductivity of asphalt mixture10.1617/s11527-016-0982-6 ↗
3. Review of permeable pavement systems10.1016/j.buildenv.2006.11.016 ↗
4. Influence of air voids characteristics on the hydraulic conductivity of asphalt mixture
5. Measurements of the moisture diffusion coefficient of asphalt mixtures and its relationship to mixture composition10.1080/10298430802524792 ↗
6. Time resolved analysis of water drainage in porous asphalt concrete using neutron radiography10.1016/j.apradiso.2013.01.040 ↗
7. Characteristic lengths affecting evaporative drying of porous media10.1103/PhysRevE.77.056309 ↗
8. What determines drying rates at the onset of diffusion controlled stage-2 evaporation from porous media?
9. Drying of Porous Asphalt Concrete Investigated by X-Ray Computed Tomography10.1016/j.phpro.2015.07.063 ↗
10. Forced convective drying of wet porous asphalt imaged with neutron radiography10.1002/adem.201300027 ↗
11. Wetting and drying in hydrophobic, macroporous asphalt structures10.1016/j.conbuildmat.2017.06.145 ↗
12. Multiprocess 3D printing for increasing component functionality10.1126/science.aaf2093 ↗
13. Laser sintering of polyamides and other polymers10.1016/j.pmatsci.2011.04.001 ↗
14. 3D inkjet printing of electronics using UV conversion10.1002/admt.201700134 ↗
15. Relationship between bulk foam stability, surfactant formulation and oil displacement efficiency in porous media10.1016/j.fuel.2017.04.114 ↗
16. Effects of changes in rock microstructures on permeability: 3-D printing investigation10.1002/2016GL069334 ↗
17. Using resin-based 3D printing to build geometrically accurate proxies of porous sedimentary rocks
18. BS EN 12697-33, B.S.I.B., Bituminous Mixtures, Test Methods for Hot Mix Asphalt: Specimen prepared by roller compactor, 2003
19. Image processing with
20. Three-dimensional quantification of intra-aggregate pore-space features using synchrotron-radiation-based microtomography10.2136/sssaj2007.0130 ↗
21. M. Bacher, 3D-printing of undisturbed soil imaged by X-ray, 2013.
22. Ahmad · 2011
23. Application of sessile drop method to determine surface free energy of asphalt and aggregate10.1520/JTE20120060 ↗
24. Investigation of gravity-driven drainage and forced convective drying in a macroporous medium using neutron radiography
25. Advanced reactor engineering with 3D printing for the continuous-flow synthesis of silver nanoparticles10.1039/C6RE00210B ↗
26. Yoon · 2016
27. Effects of CT number derived matrix density on preferential flow and transport in a macroporous agricultural soil10.2136/vzj2015.01.0002 ↗
28. BoneJ: free and extensible bone image analysis in ImageJ10.1016/j.bone.2010.08.023 ↗
29. Geometrical tortuosity 3D calculations in infiltrated aluminium cellular materials10.1016/j.mspro.2014.07.553 ↗
30. Characterization (2D–3D) of ceramic microfiltration membrane by synchrotron radiation: new and abraded membranes10.1615/JPorMedia.v16.i6.50 ↗
31. J. Hines, C.S. John, E. Pease, Hydraulic properties of asphalt concrete, 2010.
32. Predicting soil water retention curves based on particle-size distribution using a Minitab macro
33. S. Lal, Multiscale investigation and numerical modeling of imbibition, drainage and drying of a macroporous medium, 2016.
34. Dynamics of water evaporation in cold asphalt mixtures10.1016/j.matdes.2017.08.040 ↗
35. Advances in soil evaporation physics—A review
36. Heat and water transport in soils and across the soil-atmosphere interface: 1. Theory and different model concepts10.1002/2016WR019982 ↗
37. Impact of type of salt and ambient conditions on saline water evaporation from porous media10.1016/j.advwatres.2017.05.004 ↗
38. Cussler · 2009
39. Critical evaluation of enhancement factors for vapor transport through unsaturated porous media10.1029/2009WR007769 ↗
40. TauFactor: An open-source application for calculating tortuosity factors from tomographic data10.1016/j.softx.2016.09.002 ↗